S.K.Associiates

Heavy duty tike cleaner for tough stains

webertec crete is a multi-purpose acrylic emulsion. It can be used in as waterproof slurry coating, slurry bond coat, modifier for concrete repair mortar and also as a modifier for plasters. It can be used for both, internal as well as external applications.

• Ready to mix
 
• Waterproofing
 
• Easy to use
 
• Good coverage
 
• Submerged conditions
 
• Single component product
 
• Imparts flexibility
 
• No shrinkage & leakage
 
• Bonding agent
 
• High durability

Wall, Floor

• Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance, if any, using a high-pressure water jet or any other suitable method.
• Surface to be treated with subsequent polymer mortar should be saturated with water
• It can be used as a multipurpose additive for enhancing the performance of concrete/mortar mix.
• It can be used for internal as well as external applications. Non-toxic, suitable for use in potable water.
• It improves the workability of mixes.
• It makes the structure impermeable to liquids.
• Waterproof layer subjected to foot traffic needs screed protection

Adhesive for fixing vitrified tiles on the floor as well as for tile-on-tile application

• Ready to mix
 
• Self curing
 
• Easy to use
 
• High compressive strength
 
• Good coverage
 
• Tile on tile application
 
• High bond strength
 
• Single component product
 
• Low prorosity tiles
 
• High durability

Floor, Wall

weberset classic is a high polymer modified thin-set tile adhesive, specially formulated for fixing low porosity vitrified tiles on the floor in internal areas. The adhesive can be used for fixing ceramic tiles on wall and floor and is suitable for dry as well as wet areas for internal application. This is also suitable for tile-on-tile application for fixing vitrified tiles on pre-existing ceramic tile floors.

• High Bond strength.
• The free-flowing product makes it easier to mix and apply, easy-to-use.
• Useful for bed thickness of 3-15* mm. May go up to 15 mm in a limited extent for wall & floor application.
• Thixotropic formula - no sag, for the easy application on the wall.
• Low VOC – For a healthy living.
• For installation of vitrified tiles on the floor.
• Suitable for internal use only.
• Suitable for Tile-on-tile application of vitrified tiles on pre-existing ceramic tile floors.
• Self-curing properties, which allows for no-hassle application, with minimum labour.
• No hacking of the substrate required to achieve the required bonding.
• Do not use for large format tiles.
• Do not use in external areas, or areas exposed to direct sunlight.
• Do not use for fixing vitrified tiles on walls.
• Do not use for fixing stones.
• Do not use on the wet screed. The surface must be fully cured.
• Do not use for installing glass mosaic, glass tiles, or metal tiles. Use only weberset glass mosaic for fixing glass mosaics, and only weber epoxy adhesive for fixing glass and metal tiles.
• Do not use for wooden flooring, for insulating and soundproofing panels.
• Do not use on waterproofing coat – If waterproofing is required, use webertec SBR and
• webertec crete for the same. Refer to the respective datasheets for details.