S.K.Associiates

Adhesive for fixing vitrified tiles on the floor as well as for tile-on-tile application

• Ready to mix
 
• Self curing
 
• Easy to use
 
• High compressive strength
 
• Good coverage
 
• Tile on tile application
 
• High bond strength
 
• Single component product
 
• Low prorosity tiles
 
• High durability

Floor, Wall

weberset classic is a high polymer modified thin-set tile adhesive, specially formulated for fixing low porosity vitrified tiles on the floor in internal areas. The adhesive can be used for fixing ceramic tiles on wall and floor and is suitable for dry as well as wet areas for internal application. This is also suitable for tile-on-tile application for fixing vitrified tiles on pre-existing ceramic tile floors.

• High Bond strength.
• The free-flowing product makes it easier to mix and apply, easy-to-use.
• Useful for bed thickness of 3-15* mm. May go up to 15 mm in a limited extent for wall & floor application.
• Thixotropic formula - no sag, for the easy application on the wall.
• Low VOC – For a healthy living.
• For installation of vitrified tiles on the floor.
• Suitable for internal use only.
• Suitable for Tile-on-tile application of vitrified tiles on pre-existing ceramic tile floors.
• Self-curing properties, which allows for no-hassle application, with minimum labour.
• No hacking of the substrate required to achieve the required bonding.
• Do not use for large format tiles.
• Do not use in external areas, or areas exposed to direct sunlight.
• Do not use for fixing vitrified tiles on walls.
• Do not use for fixing stones.
• Do not use on the wet screed. The surface must be fully cured.
• Do not use for installing glass mosaic, glass tiles, or metal tiles. Use only weberset glass mosaic for fixing glass mosaics, and only weber epoxy adhesive for fixing glass and metal tiles.
• Do not use for wooden flooring, for insulating and soundproofing panels.
• Do not use on waterproofing coat – If waterproofing is required, use webertec SBR and
• webertec crete for the same. Refer to the respective datasheets for details.

Adhesive for fixing vitrified tiles on the floor as well as for tile-on-tile application

• Ready to mix
 
• Self curing
 
• Easy to use
 
• High compressive strength
 
• Good coverage
 
• Tile on tile application
 
• High bond strength
 
• Single component product
 
• Low prorosity tiles
 
• High durability

Floor, Wall

weberset classic is a high polymer modified thin-set tile adhesive, specially formulated for fixing low porosity vitrified tiles on the floor in internal areas. The adhesive can be used for fixing ceramic tiles on wall and floor and is suitable for dry as well as wet areas for internal application. This is also suitable for tile-on-tile application for fixing vitrified tiles on pre-existing ceramic tile floors.

• High Bond strength.
• The free-flowing product makes it easier to mix and apply, easy-to-use.
• Useful for bed thickness of 3-15* mm. May go up to 15 mm in a limited extent for wall & floor application.
• Thixotropic formula - no sag, for the easy application on the wall.
• Low VOC – For a healthy living.
• For installation of vitrified tiles on the floor.
• Suitable for internal use only.
• Suitable for Tile-on-tile application of vitrified tiles on pre-existing ceramic tile floors.
• Self-curing properties, which allows for no-hassle application, with minimum labour.
• No hacking of the substrate required to achieve the required bonding.
• Do not use for large format tiles.
• Do not use in external areas, or areas exposed to direct sunlight.
• Do not use for fixing vitrified tiles on walls.
• Do not use for fixing stones.
• Do not use on the wet screed. The surface must be fully cured.
• Do not use for installing glass mosaic, glass tiles, or metal tiles. Use only weberset glass mosaic for fixing glass mosaics, and only weber epoxy adhesive for fixing glass and metal tiles.
• Do not use for wooden flooring, for insulating and soundproofing panels.
• Do not use on waterproofing coat – If waterproofing is required, use webertec SBR and
• webertec crete for the same. Refer to the respective datasheets for details.

Testes as per EN -1015, 1348, IS 8042

White cement based polymer modified putty, suitable for interiors and exteriors, fresh as well as repainting of wall, plastered block & brick wall, concrete blocks and panels, precast walls & ceilings.

• wall construction
 
• Partition walls
 
• Easy to apply

• weberwall finecoat is a perfect blend of white cement, special polymers and minerals which protects & smoothens walls and is especially suitable for all types of cementitious surfaces like concrete, rendered wall, blocks and panels, precast walls & ceilings and plastered surfaces.

  Being pure dazzling white in colour, any shade of paint comes alive on it and starts reflecting its true tone. weberwall finecoat is pre coat applied with ease before painting of the wall which fills fine pores of the surface providing a seamless silky smooth surface.

  weberwall finecoat has strong adhesive properties which provide a powerful bond between the base and the paint, making it an ideal subsurface for all interior, ceiling and exterior walls ensuring a longer life for the painted surfaces. The special polymers used in weberwall finecoat enhances water resistance of surfaces (damp resistance) which safeguards expensive paint against flaking.

  weberwall finecoat is a fine powder which is easily mixed with water for direct application on surfaces to get a silky and shiny finish which makes weberwall finecoat as the perfect wall putty in India, meeting the highest global standards.

• • Perfect whiteness - A perfectly smooth and glossy white finished surface where colours reflect their true shade. It can be left unpainted also.
  • Enhanced cohesion & adhesion - Good inter-coat adhesion to paints and excellent abrasion resistance.
  • High durability - Protects expensive paint from dampness, peeling off and flaking, avoid frequent repainting.
  • No curing required post-application.
  • Uniform & Smooth finish along with reduced capillary water absorption result into increased paint coverage and eliminating need of primer; making it a cost-effective solution.
  • Enhanced water-resistant properties - Performance enhancing special polymer additives prevent growth of algae and fungi on walls.
  • Health friendly - Low VOC and free from any heavy metals like lead, mercury and chromium.
  • Anti-carbonation property.
  • Excellent workability - Easy to apply due to smooth paste, better surface hardness and drying characteristics.
  • Suitable for interior as well as exterior.
  • Polymer enriched formulation provides excellent crack resistance.
  • Paint Suitability - Accepts any kind of paint or distemper application on it.
  • True colour reflection - In pure white surface, colour comes alive and reflects its true tone.
  • Value for money - Cost-effective due to low paint consumption.
  • Longlasting - No peeling, flaking or blistering & improved life for paint finishes.
  • weberwall finecoat should be always applied over-saturated surface.
  • It is recommended not to rub the surface done with weberwall finecoat strongly and harshly with rough emery paper. This breaks the film formed over it which decreases the water-resistance properties.
  • We do not recommend mixing of pigments/stainer in weberwall finecoat. Paint can be applied on weberwall finecoat with or without primer.