Trigger	Flow/volume trigger, Leak adapted
Trigger delay	Approx. 30 ms
Frequency	5 to 20 Hz
Volume Guarantee Ventilation	SIMV+VG, SIPPV+VG, PSV+VG
Oxygen mixer loss (bleed flow)	0 (zero) L/min

Settings

Oxygen concentration	21–100 vol.% oxygen
Inspiratory Pressure	10 to 80 mbar
PEEP/CPAP	0 to 25 mbar
Inspiratory time	0.1 to 2 seconds
Expiratory time	0.2 to 30 seconds
Inspiratory flow	1 to 30 L/min
Base flow (VIVE)	1 to 30 L/min
Frame rate	10, 15, 20, or 30 frames per second
Frame rate with the option ADAP	10, 15, 20, 30, 40, or 50 frames per second
Cut-off frequency for low pass filter	10 to 300/min
Upper and lower cut-off frequencies for the band pass filter	30 to 300/min

Monitoring

Flow Monitoring	At the Y-piece, integrated
Volume Monitoring	At the Y-piece, integrated
Lung function monitoring	Compliance, resistance C20/C, time constant, r
Real-time curves	Flow and pressure, integrated
Peak Pressure	To 99 mbar
Graphic trends	6 parameters, integrated
Logbook	Record of last 100 alarms

Ambient Conditions

Temperature (device) During Operation	5 to 40°C (41 to 104°F)
Temperature (electrode belt and cables) During Operation	5 to 45°C (41 to 113°F)
Atmospheric pressure During Operation	700 to 1060 hPa (10.15 to 15.37 psi)
Relative humidity During Operation	20 to 95%, without condensation
Temperature During Storage & Transportation	-20 to 40°C (-4 to 104°F)
Atmospheric pressure During Storage & Transportation	500 to 1060 hPa (7.25 to 15.37 psi)
Relative humidity During Storage & Transportation	20 to 90%, without condensation

Performance

Number of electrodes	16 electrodes plus 1 reference electrode
Feed current amplitude	80 to 90% of maximum patient auxiliary current conforming to IEC 60601-1 (3rd edition)
Feed current frequency	80 to 130 kHz
Display unit size	1440 x 900 pixels
Display unit Contrast ratio	Min. 500 : 1
Display unit Viewing angle	130°

Operating Data

Mains supply nominal voltage and frequency range	100 V to 240 V, 50/60 Hz
Mains supply characteristics	Mains supply must conform to clause 4.10.2 of IEC 60601-1 (3rd edition) and especially be overvoltage category II or lower according to IEC 60664-1
Current consumption	0.6 A at 230 V, 1.3 A at 100 V
Power Consumption	Max. During Operation: 125 W, Typical During Operation: Approx. 80 W, When Device is Switched Off: 40 W
Sound pressure level	Max. 45 dB(A)
Dimensions	600 x 1400 x 750 mm
Weight	44 kg (97 lbs)
Materials used	Electrode belt:- Silicone rubber, conductive silicone rubber, stainless steel, goldplated brass, Patient cable:- Plastics (thermoplastic polyurethane (TPU), polyamide (PA), polyurethane (PUR), polypropylene (PP), thermoplastic elastomer (TPE), polybutylene terephthalate (PBT)), Trunk cable:- Plastics (polyamide (PA), thermoplastic polyurethane (TPU), polyurethane (PUR))

Classification

Applied parts	Applied parts are: electrode belt, reference electrode, patient cable, trunk cable
External power supply	Protection class I conforming to EN 60601-1
Protection against harmful ingress of water	IPX1 (dripping water: vertically falling drops) conforming to IEC 60529
Microenvironments of pollution	Level 2 conforming to IEC 60601-1
Biocompatibility of applied parts	Tested in accordance with ISO 10993 for intact skin and an application duration of <24 hours

Communication Interfaces

Digital outputs	USB ports 1 and 2 (one on each side panel)
Digital inputs	RS 232 (9-pin) connectors 1 (on the back panel) RS 232 (9-pin) connectors 3 (on the back panel) RS 232 ports are electrically isolated from the equipmentelectronics (test voltage 1500 V)
Option ADAP	The option ADAP (Advanced Data Analysis Package) extends the functionality of the basic EIT software with the following functions: • Patient data entry • Data recording • Data review • File handling • Higher frame rate • Filter setting Band pass • Manual adjustment of the operating frequency

Power Supply

Battery Type	2 x 12 V lead-acid battery
Integrated Battery Fuse	F20AL 32VDC
Charging time	Min. 12 hours

Alarm

Inspiratory O₂ concentration (FiO₂)	Integrated
Airway Pressure	To 99 mbar

Features

Consistent volume guarantee
BabyFlow nasal CPAP
Precision ventilation monitoring
Compact & easy to learn
Intelligent operating concept

Application

Emergency Care & ICU

piratory lung conditions. Volume Guarantee ensures sufficient ventilation while avoiding the risk of volutrauma.

High frequency ventilation
The Drager Babylog 8000 plus gives you the option of High Frequency Ventilation (HFV) at the touch of a button, which can be used in combination with CPAP or IMV modes. The ventilator accurately measures even the smallest tidal volumes, letting you fine tune your therapy to suit your patients’ needs.

Pressure support ventilation – the standard for neonates
Our pressure support ventilation (PSV) features automatic leak compensation and gives the infant more control over the breathing pattern by synchronising inspiration and expiration. Continuous, automatic leak compensation maintains optimal inspiration times.

BabyFlow nasal CPAP
The Babylog 8000 plus gives you all the advantages of non-invasive support with an easy to use nasal CPAP system especially designed for the smallest patients. The unique mask design circumvents the pitfalls of the past and enables stable, atraumatic CPAP delivery.

Compact & easy to learn
Small device that just blends into your NICU. Six easy to learn clear control knobs let you quickly get started. Intelligent alarms facilitates workflow and lets the operator concentrate on caring for the baby.

View Complete Details

Yes, I am interested!

Interested in this product?

Get Best Quote

Drager Evita 2 Dura Ventilator

Rs. 300000 Get Latest Price

Product Brochure Watch Video

Product Details

Brand	Drager
Model Name/Number	Evita 2 Dura
Patient Age Group	Adults and children (body weight of at least 3 kg), With NeoFlow option: infants and neonates (min. body weight of 0.5 kg)
Tidal Volume	0.1 to 2.0 L (Adult), 0.02 to 0.3 L (Pediatric), 0.003 to 0.1 L (Neonatal)
Ventilation Modes	IPPV, IPPVAssist (CMV, CMVAssist), SIMV, SIMVASB (SIMV, SIMV/Psupp), MMV, MMVASB (MMV, MMV/Psupp), BIPAP1), BIPAP1)ASB, BIPAP1)Assist (PCV+, PCV+/Psupp, PCV+Assist), CPAP, CPAPASB (CPAP, CPAP/Psupp), APRV (optional), ILV (optional)
Respiratory Rate	0 to 100 /min, 0 to150 /min (Neonatal)

Controls

Trigger

Internal automatic pressure trigger, Flow, Volume (Flow adjustable 0.3 to 15 L/min)

Settings

Oxygen concentration	21 to 100 Vol.%
Inspiratory Pressure	0 to 80 mbar (cmH₂O)
Inspiratory time	0.1 to 10 seconds
Inspiratory flow	6 to 120 L/min (Adult), 6 to 30 L/min (Pediatric and Neonatal)

Monitoring

Breathing gas temperature

18° to 51°C

Ambient Conditions

Temperature (device) During Operation	10 to 40°C
Atmospheric pressure During Operation	700 to 1060 hPa
Relative humidity During Operation	0 to 90%, without condensation
Temperature During Storage & Transportation	–20 to 60 oC
Atmospheric pressure During Storage & Transportation	500 to 1060 hPa
Relative humidity During Storage & Transportation	0 to 100%, without condensation

Performance

Display unit size	6.5 inch
Display Technology	TFT LCD color display
Intermittent PEEP	0 to 35 mbar (cmH₂O)
Medicament Nebulisation	For 30 min
Safety Valve	100 mbar (cmH₂O)
Valve response time	≤ 5 ms
Control Principle	Time cycled, volume constant, pressure-controlled
I:E Ratio	1:9.5 to 4:1
Minute volume	MV, MVspont, MVleak (0 to 99 L/min)
Maximum flow for pressure assist/ spontaneous breathing	0 to 80 mbar (cmH₂O)

Operating Data

Mains supply nominal voltage and frequency range	100 to 240 V, 50/60 Hz, 10 to 30 V DC (optional)
Power Consumption	Approx. 125 W
Dimensions	530 x 290 x4 50 cm (without trolley)
Weight	Approx. 27 kg (60 lbs.)
Trigger sensitivity	0.3 to 15 L/min

Alarm

Inspiratory O₂ concentration (FiO₂)	High/Low
Airway Pressure	High/Low
Apnea alarm time	5 to 60 seconds
End-expiratory CO concentration (etCO₂)	High/Low
Expiratory minute volume (MVe)	High/Low
SpO₂ pulse	High / Low (optional)
Spontaneous breathing frequency	High

Additional Details

Gas supply	O₂, air: 2.7 to 6 bar/39 to 87 psi
Dead space volume	0 to 999 mL, BTPS
Device Compliance	((0.0 to 300 mL/mbar)(mL/cmH2O))
Airway pressure measurement Display range	0 to 99 mbar/cmH₂O
Tidal volume Measured Display range	Inspired VT, expired VT, VTASB (VTPS) (0 to 3999 mL)
Respiratory rate Display range	ftotal, fspon, fmand. (0 to 300/bpm)
Measured Trends	FiO₂, MV, VT, f, PEEPi, R, C, etCO₂
Measured Loops	Paw-V, V-Flow, Flow-Paw
Waveform display Airway pressure	Airway pressure-time, flow-time, volume-time
Enhancements	AutoFlow – Automatic adaptation of inspiratory flow in volume controlled modes, ATCT – Automatic Tube Compensation (optional), NIV - Mask Ventilation (optional)
Inspiratory Pressure Limit	0 to 100 mbar
Rise time for pressure assist (Slope)	0 to 2 seconds
Proportional Pressure Support Flow Assist	180 L/min (adult), 60 L/min (pediatric)
Oxygen Measurement Display range	Inspired O₂ concentration (15 to 100 Vol.%)
Displayed Resistance	((0.0 to 600 mbar/L/s)(cmH₂O/L/s))
CO₂ production (VCO₂)	0 to 999 mL/min, STPD
Dead space ventilation (Vds/VT)	0 to 99%
Digital machine output	Output and reception via an RS 232 C interface, For output and reception via two RS 232 C interfaces (optional)
Analog Machine output	For analog output of two measured values
End-tidal CO2 concentration EtCO2	0 to 100 mmHg

Features

Simple and versatile operation
Two-in-one ventilation
Spontaneous breathing strategy
Simpler and speedier standard procedures

Application

Emergency Care & ICU

The Drager Evita 2 Dura is an advanced intensive care Drager ventilator with a simple and versatile operation, a highly responsive flow trigger, and an open breathing system that gives both the patient and the clinician “Room to Breathe”. The standard color screen provides enhanced monitoring. The Drager Evita 2 Dura can be custom built to your order. Features like enhanced graphics, integrated CO₂ monitoring or specialized modes like APRV can be added to the system at any time without changing the profile of your device.

The Evita 2 dura provides patient and ventilator-related monitoting with user interaction reduced to a minimum. The high-resolution full-color sereen displays comprehensive information on a patient’s status, always showing two ventilation curves and six monitored values, and the screen configuration can be customized to show the most important values for a particular ICU.
• Higher functional residual capacity.
• Utilizes AutoFlow technology.
• Accomodates neonatal, pediatric or adult patients.
• Modular upgradeability.
• Can be used for both conventional and non-invasive ventilation.
• High resolution full color display.
• Customizable display/monitoring.
• Rotary knob and soft keys for ease of use.
• Programmable weaning.

View Complete Details

Yes, I am interested!