X
View Mobile Number 87% Response Rate

Our Products

+View All

Chemical Maintenance products.

We are a leading Wholesale Distributor of WD-40 Multi-Use Product Original (420Ml), Pidilite WD 40, 500 ml Multipurpose Smart Straw Spray, CRC 2 26 MULTI-PURPOSE PRECISION LUBRICANT, Crc 2-26 Electrical Contact Cleaner, CRC Eco Leak Finder and CRC TUNER 600 200 ML Contact Cleaner Aerosol from Pune, India.
Rs 410/ Piece
Rs 7,000/ Can
Rs 350/ Bottle
Ask Price
Ask Price
Rs 1/ Piece
Rs 580/ Bottle
Ask Price
Rs 1/ Bottle
Rs 1/ Bottle
Ask Price
Rs 410/ Set
Rs 1/ Bottle

WD-40 Multi-Use Product Original (420Ml)
Interested in this product?
Get Best Quote

WD-40 Multi-Use Product Original (420Ml)

Rs 225 / PieceGet Latest Price

Unit Pack Size420ML
Formask
Gradeask
ColorASK
PropellantYes
Surface FinishASK

WD-40® Multi-Use Product Original (420ml)

WD-40 Multi-Use Product protects metal from rust and corrosion, penetrates stuck parts, displaces moisture and lubricates almost anything. It even removes grease, grime and more from most surfaces.
Product Benefits:Displaces moisture to prevent rust and dry out electrical systemsPenetrates to loosens stuck partsLubricates to make equipment run smoothlyRemoves oil, dirt, grease and grimeProtects metal surfaces from rust and corrosionEasy to use
Recommended For:
Gardening tools and equipmentBattery terminalsSpark PlugsBike framesDoor locks and hingesPower toolsEnginesAlloysExhausts

View Complete Details

Yes, I am interested!

  • Pidilite WD 40, 500 ml Multipurpose Smart Straw Spray
  • Pidilite WD 40, 500 ml Multipurpose Smart Straw Spray
  • Pidilite WD 40, 500 ml Multipurpose Smart Straw Spray
  • Pidilite WD 40, 500 ml Multipurpose Smart Straw Spray
  • Pidilite WD 40, 500 ml Multipurpose Smart Straw Spray
Pidilite WD 40, 500 ml Multipurpose Smart Straw Spray
Interested in this product?
Get Best Quote
Usage/ApplicationIndustrial
GradeAsk
ColorAmber
PropellantYes
Packaging TypeBottler
Volume500ML

Pidilite WD 40, 500 ml Multipurpose Smart Straw Spray,

for Auto Maintenance, Home Improvement, Loosens Stuck & Rust Parts, Removes Sticky Residue, Descaling, Protectant & Cleaning Agent for Multi Use

Multipurpose Use - The WD 40 can be used for home improvement and automotive purposes and is an all in 1 spray as it acts as a rust remover, stain remover, lubricant and much more with countless utilities.

Multi-Surface Applicability - This multi-purpose spray can be used on multiple surfaces like metal, iron, chrome, wood, aluminium and more with ease either at home, office, on vehicles or any other commercial purpose.

Great for lubrication - The WD-40 spray is an excellent choice to ensure lubrication of drawer channels, door hinges, sewing machine, and cycle chains among other uses. Its unique formula ensures no external damage befalls these surfaces.

Great for degreasing - The WD-40 is also an effective degreasing agent that can be used to effectively remove grime, grease, and other smudges from a variety of surfaces. These can include surfaces like wooden tables, countertops and even the metallic surfaces of cars and bikes.

Cleaning agent - The spray can also be used as an active cleaning agent that removes stains and other dirt, sticky and dust particles with ease. It can also be used on automobile parts as it can clean spark plugs and rusting showpieces among others. ening tools and equipment, spark plugs, bike frames, door locks and hinges, power tools, engines, exhausts

No more Fixing-Re-Fixing the straw - Smarter way to visit those hard to reach places with easy switch between Straw & No-Straw

 

Remove Rust from the Car Battery Terminals

Now one stop solution to clean & protect your car battery terminals from rust, corrosion & dirt. Restore their old glory with WD-40.

 

Cleans & Protects the Moving Parts of the Cycle- Chain

Don't let a stuck cycle chain stop you from exploring and staying fit! WD-40 would remove rust, grime & mud deposit with just few sprays. Start exploring with WD-40.

 

Lubricates the Moving Parts of the Cycle- Gear and Chain Assembly

WD-40’s lubricating properties are world-renowned; our secret ingredients are widely dispersed upon application, providing smooth and easy lubrication for moving parts and mechanisms.

 

Removes Grease, Oil and Rust from Motorcycle Engine

WD-40 cleans, getting under grease, grime, dirt and oil deposits for an easy, wipe clean finish. It’s great at dissolving adhesives too, helping to cleanly remove tape, labels, stickers and excess bonding materials and oil & rust from motorcycle engine.

 

A Dirty Kitchen Chimney?

Cleaning chimneys can be a tedious task. Now remove dirt, grime & grease from chimney surface easily-like an expert, with WD-40. (Turn of stoves before using WD-40. Clean WD-40 before switching on chimney/stove.)

 

Stuck Key hole?

Key getting stuck in the keyhole Don't worry we've got the lock covered. Smoothen your key-hole movement and repel further moisture & rust deposit in it with a spray of WD-40.

 

View Complete Details

Yes, I am interested!

  • CRC 2 26 MULTI-PURPOSE PRECISION LUBRICANT
  • CRC 2 26 MULTI-PURPOSE PRECISION LUBRICANT
  • CRC 2 26 MULTI-PURPOSE PRECISION LUBRICANT
CRC 2 26 MULTI-PURPOSE PRECISION LUBRICANT
Interested in this product?
Get Best Quote

CRC 2 26 MULTI-PURPOSE PRECISION LUBRICANT

Rs 240 / BottleGet Latest Price

Product Brochure Watch Video

Cap TypeTrigger Spray
BrandCRC
Packaging TypeBottle
Usage/ApplicationLubrication
Model Name/NumberCRC 226
ColorWhite
FormNo
Packaging Size400ML
Net Content500G
TypeAerosol
FeaturesElectrical component clear
Model NoCRC-2

DESCRIPTION:
Plastic safe lubricant, penetrant and corrosion inhibitor that helps prevent electrical malfunctions caused by water penetration, humidity, condensation or corrosion. Restores resistance values and helps stop current leakage.
APPLICATIONS:
Connectors, relays, circuit breakers, transformers, switchgear, motors, generators, controls, instruments, communication assemblies, electronics, alarm systems, starters, tubing, castings, gears, weld rod, wire, fixtures, dies, jigs, shim stock, chucks.

CRC 2-26 is a multi-purpose maintenance spray for electrical equipment
CRC 2-26 is a Electrical Contact Cleaner
CRC 2-26 ® Multi-Purpose Precision Lubricant

CRC 2-26 , Electro Cleaner , 500ml Aerosol

 

CRC 2-26 18/8 Steel Power Spray 500 ml



View Complete Details

Yes, I am interested!

Crc 2-26 Electrical Contact Cleaner
Interested in this product?
Get Best Quote

Crc 2-26 Electrical Contact Cleaner

Rs 250 / BottleGet Latest Price

Minimum Order Quantity: 1 Bottle

BrandCRC
Packaging TypeBottle
Quantity Per Pack500ML
Usage/ApplicationMaintenance and protection
ColorGreen
FormLiquid
Packaging Size650 G

CRC 2-26 ELECTRICAL CONTACT CLEANER

GENERAL DESCRIPTION


Multi-purpose maintenance for electrical equipment

CRC 2-26 is a multi-purpose lubricant preventing electrical and electronic malfunction caused by water penetration, humidity, condensation or corrosion.The stable, low surface tension, high capillary action formula provides great penetrating and spreading power.
FEATURES
  • Cleans, lubricates, protects, penetrates, and loosens corrosion
  • Prevents corrosion by displacing moisture
  • Restores resistance values by reducing current leakage
  • Provides precision lubrication by its thin, high dielectric strength, lubricating film
  • Helps restore water-damaged electrical equipment
  • Frees rusted or seized parts by penetrating under dirt and scale into the finest pores and cracks
  • Can be used on all metals and alloys
  • Will not harm modern plastics, painted surfaces, coatings and rubbers
  • Convenient 360° (upside-down) spray valve for aerosols
  • Non-flammable CO2 propellant, giving an active product content of 97%
Specifications :
  • NSN 6850-00-874-5847
  • USDA CLASS H2
APPLICATIONS

Helps to protect, lubricate and restore
  • Electrical connectors
  • Relays
  • Circuit breakers
  • Transformers
  • Switch gears
  • Motors
  • Generators
  • Controls
  • Instruments
  • Communication assemblies
  • Electronics
  • Alarm systems
  • Starters.
DIRECTIONS
  • Spray light even coat to protect surfaces and to seal out moisture.
  • Apply liberally to loosen rusted/seized parts; full penetration may require several hours.
  • To displace water, spray wet surfaces until run-off is clear and moisture free. When possible, dip water damaged equipment in CRC 2-26; agitate while submerged; remove and allow to drain. A detailed “CRC water damage restoration” procedure is available upon request.
  • To be removed by CRC Lectra Clean II, hydrocarbon solvents or alkaline degreasing before surface treatment.
  • For application of CRC 2-26 in dipping baths, customers should take care to stir from time to time (to distribute small amounts of deposits) and to prevent excessive evaporation of solvent.When stable emulsions have been formed, the bath should be emptied and cleaned, and the product replaced.
  • Do not use on energised equipment; allow solvent to evaporate before energising.This evaporation may take up to 4 hours, depending on surface condition and environment. Use only in well ventilated area.
  • A safety data sheet (MSDS) according EU93/112 is available for all CRC products.


Additional Information:

  • Item Code: 32127
  • Delivery Time: 2

View Complete Details

Yes, I am interested!

  • CRC Eco Leak Finder
  • CRC Eco Leak Finder
  • CRC Eco Leak Finder
  • CRC Eco Leak Finder
  • CRC Eco Leak Finder
CRC Eco Leak Finder
Interested in this product?
Get Best Quote

CRC Eco Leak Finder

Rs 410 / PieceGet Latest Price

Product Brochure Watch Video

Model Name/NumberCRC ECO LEAK FINDER
FormNo
BrandCRC
Usage/ApplicationGas Leak finder,Air Leak finder
MaterialMS
Display TypeLiquid, Analog
Gas TypeNatural Gas
Weight500ML
Power SourceNo
Size500ML
ColorAMBER

ECO LEAK FINDER

Allows detecting leaks in gas conducts and installations.
Water based detector for gasses. Meets the requirements of EN 14291 and DVGW (Deutsche Vereinigung des Gas- und Wasserfaches) registration number NG-5170AS0069. CRC ECO Leak Finder detects gas leaks in pressurized pipe work and pressurized systems. At the location of a gas leak, it forms highly visible bubbles. Biodegradable according to OECD 301B: 31%.

Applications:

Pipes, valves, screw-connections, welding seams, compressors, refrigeration units, air conditioning

CRC ECO Leak Finder for The Detection of Almost All Types
CRC Eco Leak Finder Supplier,Wholesaler and Exporter
LPG PNG GAS DETECOTR
LPG Gas Leak Detector
PNG Gas Leak Detecor 
CNG Gas Lak Detecor
Gas Leak Detector
Refrigerant Gas Leak Detector 






Additional Information:

  • Item Code: 10732-AB
  • Production Capacity: 500ML
  • Delivery Time: 3-4 working days all India

View Complete Details

Yes, I am interested!

CRC TUNER 600 200 ML Contact Cleaner Aerosol
Interested in this product?
Get Best Quote
Packaging TypeBottle
Usage/ApplicationIndustrial
Cap TypePlastic
Industry TypeTV & Telecommunication
BrandCRC
Quantity Per Pack12 Nos
Model Name/NumberTuner 600

CRC Tuner 600 200 ml Contact Cleaner Aerosol for Various ApplicationsKontakt Chemie 71809 Tuner 600 Contact Cleaner 200 ml

The cleaning spray for high quality consumer electronics.

Especially designed to clean electrical equipment, electronic components and PC-boards of high frequency equipment with sensitive plastic parts. The low surface tension of the carefully selected solvents used in TUNER 600 makes it penetrate into hard-to-reach areas.

Features:

+ A high grade, pure product, which does not attack components.

+ The finely balanced solvent combi nation enables TUNER 600 to clean dust, nicotine, greasy residues, etc..., from electrical equipment and electronic components.

+ Dries quickly without leaving any residue.

Application

 

Computer or TV & Telecommunication Technology, Potentiometers & Linear Regulators, Sensors or Graphite Conductor Layers of IR Remote Controls

View Complete Details

Yes, I am interested!

Disinfectant Chemicals Flight Spray Klean 500ML
Interested in this product?
Get Best Quote
Packaging Size500ML
FragranceNo
BrandFlight
Type Of FloorWooden Floor
Packaging TypeBottle
ColorGreen
FormLiquid
Model Name/NumberFlight Klean

FLIGHT SPRAY KLEAN 5LT (4)
•  Tested by the SABS and is proven to kill 99.9% of all known bacteria.
•  Registered with the NRCS as an Anti-Bacterial detergent.
•  Biodegradable
•  Non Toxic
•  Contains no Bleach or Ammonia
•  Non-abrasive
•  Non Flammable
•  Multi-Purpose Detergent
•  Can be diluted up to 25:1or used in its concentrated form.

DIRECTIONS FOR USE:
For full anti-bacterial effect spray on and leave for 5 minutes wipe off

•  Around the Home
Carpets, Upholstery, Walls, Ovens, Floors, Windows, Bathrooms, Showers, Mildewed areas, Tiles, Mirrors, Kitchen Surfaces, Food preparation surfaces, Braais, Braai grills and much more

•  Garage
Floors, Oil spills, Grease marks, Tools, Engines, Sports equipment, work surfaces

•  Office
Work surfaces, Stainless steel furniture and fixtures, Glass, Carpets, Machinery

View Complete Details

Yes, I am interested!

  • Apesin Ap 100 Plus Disinfectant Chemicals
  • Apesin Ap 100 Plus Disinfectant Chemicals
Apesin Ap 100 Plus Disinfectant Chemicals
Interested in this product?
Get Best Quote
Usage/ApplicationSurface Disinfectant
Packaging Size20L
Packaging TypeDrum
Physical StateLiquid
BrandW&M
Ph Value5
Shelf Life1 year

APESIN AP 100 plus Powdery Oxygen active disinfectant

  • APESIN AP 100 Plus cleans and disinfects in only one processing step while showing excellent cleaning properties and ability to eliminate persistent soiling.
  • Thanks to its oxygen basis APESIN AP 100 Plus has no indoor smell nuisance.
  • Excellent material compatibility.
  • Free of aldehydes, phenols, chlorine.
  • Also ideally suitable for coated floorings (i.e. LONGLIFE complete).
  • APESIN AP 100 Plus is effective against all enveloped and non-enveloped viruses, e.g. norovirus. Outstanding effectiveness against antibiotic-resistant bacteria, e.g.: MRSA.
Area of application

 Can be used on all washable surfaces throughout the clinical sector (especially highrisk areas) and in sanatoria, nursing homes, doctors surgeries, ambulances and similar.

 Particularly suitable for sensitive materials such as acrolein and acrylic glass.

 Can be used in food processing areas.

View Complete Details

Yes, I am interested!

CRC Wood Glider Lubricant
Interested in this product?
Get Best Quote
BrandCRC
Usage/ApplicationGliding
Packaging TypeBottle
TypeCleaner
Packaging Size400ML
Product TypeChamical
Packing TypeBottle

Wood Glider 400ml 

Improves the sliding of unprocessed wood on working tables of wood processing machines


Improves the sliding of unprocessed wood on working tables of wood processing machines. Colorless product without silicones. Produces a very low coefficient of friction. Suitable for all wood types. Safe on all metal surfaces, does not stain. Can be used on plastic drives and sliding mechanisms, guide rails, working and positioning tables of all wood working machines.



Additional Information:

  • Delivery Time: 3-4

View Complete Details

Yes, I am interested!

CRC 5-56 Multi- Purpose Lubricant
Interested in this product?
Get Best Quote
BrandCRC
Model NumberCRC 556
Packing size175 g, 210 ml
Packing TypeBottle

CRC 5.56 is a multi-purpose product with superior penetrating power that breaks through rust and corrosion while it clears away scale and dirt. Eliminates the need for many disassembly operations. Lubricates for smooth action, and silences annoying squeaks and squeals. Protects metals against corrosion and displaces moisture to help start wet engines.
APPLICATIONS:
Recommended for penetrating rust and corrosion, freeing components bonded by dirt & scale, preventative maintenance programs, as an environmental shield eliminating breakdowns due to poor environmental exposure, such as high humidity/salt air, for lubrication of contacts.
FEATURES/BENEFITS:
Moisture eliminator for wet equipment. Moisture barrier to prevent trouble before it starts. Protective film seals out moisture. Lubricant – will give lubrication where it penetrates, restoring smooth action and silencing annoying squeaks and squeals. Con

Additional Information:

  • Item Code: 9310832050281
  • Delivery Time: 3

View Complete Details

Yes, I am interested!

ASV MolySulf Anti Spatter ASA 540
Interested in this product?
Get Best Quote

ASV MolySulf Anti Spatter ASA 540

Rs 2,450 / PackGet Latest Price

Unit Pack Size5LTR
FormLiquids
Usage/ApplicationAnti Spatter
BrandASV
Packaging Type5LTR,30LTR
Gradeask
Quantity Per Packask

ASV ASA 540 is water based, silicone free, anti-stickseparation agent for preventing adherence of spatter towelding surfaces.

Formulated with special synthetic release agents, it preventsburning of welding spatters on contact tips and work piecesthereby eliminating the need for chiseling, grinding orbrushing after welding.

ASV ASA 540 improves surface finish of equipment andsaves valuable time and labor. It does not contain anysilicones or ozone depleting chemicals and is paintablethereby enabling post-welding treatment as painting or anyother industrial metal treatment processes.

ASV ASA 540 outperforms aerosol based spatter releaseagents and besides economy adds to the safety of usage asit contains no flammable solvents or propellants especiallyin enclosed work areas.

ApplicationsFor prevention of spatter formation on:  Nozzles Work pieces  Torches Jigs

Benefits Prevents burning of welding spatters on contact tips & work pieces Provides long lasting anti adherent effect Improves surface finish Extends nozzle life Silicone free
Available Packaging5 liter, 30 liter
Shelf Life12 months from date of manufacture in sealed condition.

Water Based AntiSpatter Liquid, Oil, Gel, Spray

View Complete Details

Yes, I am interested!

  • Calguard Anti-Spatter Spray
  • Calguard Anti-Spatter Spray
Calguard Anti-Spatter Spray
Interested in this product?
Get Best Quote

Calguard Anti-Spatter Spray

Rs 150 / BottleGet Latest Price

Unit Pack Size5LTR
Formask
Usage/Applicationask
BrandCalguard
Packaging Type5LTR
GradeASK

Calguard Anti-Spatter Spray

Water Based AntiSpatter Liquid, Oil, Gel, Spray

DESCRIPTION

Calguard Anti-Spatter Spray is a water based, paintable, cost effective and non-flammable agent for the prevention of weld-spatter adhering to metal surfaces during the welding process.

Calguard Anti-Spatter Spray has outstanding performance preventing spatter sticking to a wide range of steels, including mild steel, stainless, steels and aluminium.

Calguard Anti-Spatter Spray avoids the need for mechanical abrasion or grinding of weld spatter following welding.

View Complete Details

Yes, I am interested!

  • Crc Inox Weld Kleen
  • Crc Inox Weld Kleen
  • Crc Inox Weld Kleen
  • Crc Inox Weld Kleen
Crc Inox Weld Kleen
Interested in this product?
Get Best Quote

Crc Inox Weld Kleen

Rs 1 / BottleGet Latest Price

Usage/ApplicationDomestic
Physical StateLiquid
Packaging Size2KG
Packaging Type2KG
BrandCRC
Grade StandardTechnical Grade
ColorClear
NatureYes
Water SolubilityNO
Solubility In WaterNo

INOX WELD KLEEN
Welding cleaner

Cleaners - Heavy duty

Restores the original characteristics of Stainless Steel after welding.

CRC Inox Weld Kleen is a pickling paste that restores the original characteristics of stainless steel after welding or heat treatment. Degreasing, cleaning, pickling and passivating of austenitic and duplex stainless steel 303, 304, 316,... , nickel and aluminum. Fastworking, very efficient, economical and practical to use


1. GENERAL DESCRIPTION Pickling paste that restores the original characteristics of Stainless Steel after welding or heat treatment. Degreasing, cleaning, pickling and passivating of austenitic and duplex stainless steel 303, 304, 316, …, nickel and aluminium.


2. FEATURES • Degreases and cleans the surface of the welding area. • Eliminates all color effects from heat treatment. • Passivates and restores the stainless effect after welding. • Does not contain hydrofluoric acid. Consequently no emissions of HF vapour. • Does not contain Chlorine nor Sulphur. • Active with temperatures >5°C. • No dripping on inclined and vertical surfaces. • Fast-working. • Very efficient. Practical to use. • Economical. • No need to degrease but recommended on very contaminated surfaces (degrease with CRC Industrial Degreaser). • Passivation occurs automatically after rinsing with water and by exposing to the air. • The tensio-active substances used are over 90% biodegradable according to OECD standards. 3. APPLICATIONS • For local pickling and cleaning constructions and all welding joints on stainless steel.

4. DIRECTIONS Always wear protective clothing and read the safety instructions. • Stir the pickling paste. Spread the undiluted paste over the surface or the welding joint by using an acid resistant brush. • Contact time: 30 min to 2 h. (depending on the type of steel, the kind of welding joint and the temperature of the environment). • The pickling process is terminated as soon as the paste turns grey. • Always rinse abundant with clean water. • Different optical effects and grey shades can be obtained by varying the pickling time, concentration or temperature. • Over-pickling results in sensitivity of the corrosion and harms the passivation process. In case of doubt, try out on a test surface or contact our technical service.  A safety data sheet (MSDS) according to EU directive 91/155/EEC and amendments is available for all CRC products.



Additional Information:

  • Item Code: 30379
  • Delivery Time: 4-5 Days
  • Packaging Details: Bulk 2 KG

View Complete Details

Yes, I am interested!

Blue Mould Protect
Interested in this product?
Get Best Quote

Blue Mould Protect

Rs 1 / SetGet Latest Price

BrandCRC
Packaging TypeBottle
Pack Size500ML
Usage/ApplicationIndustrial Use
FormLiquid
ColorBlue

BLUE MOULD PROTECT

Anti - Corrosion Products

Short term blue colored corrosion inhibitor for mould tools.

Non silicone corrosion inhibitor for injection moulding tools. NSF registered for use in the food and beverage industry.


• Ideal for short-term storage of mould tools, dies and jigs

• Highly visible blue dye provides an easy visual method for ensuring complete coverage

• Displaces humidity on metal surfaces

• Silicone-free

• No need for cleaning as the product moulds off during the first cycles

• NSF H2 registered


General Description

Highly visible trasparent blue colouerd corrosion inhibitor for protections of the mould tools ans equipment during a short per

View Complete Details

Yes, I am interested!

  • Eco Complex Blue
  • Eco Complex Blue
  • Eco Complex Blue
  • Eco Complex Blue
Eco Complex Blue
Interested in this product?
Get Best Quote

Eco Complex Blue

Rs 7,000 / CanGet Latest Price

Product Brochure

BrandCRC
Usage/ApplicationOffice
Packaging TypeBottle
Physical StateLiquid
Quantity Per Pack20LTR
ColorBlue
TypeCleaner

Cleaning concentrate, Complex Blue eco
DescriptionVersion:Alkalis, water-soluble cleaning concentrate for general-purpose cleaning of large areas on machines, plant, floors, work surfaces, and conveyor belts. Active components are easily biodegradable surfactants. Approval NSF A1 for foodstuffs.Note:Not available in all countries. Express delivery not possible. Products with low propellant gas proportion and therefore very high effective agent proportion of approx. 95%. This achieves the maximum effectiveness.

1. GENERAL DESCRIPTION Removes grease, oil, grime and tough stains from any washable surface (even floors and walls) and from food processing equipment. Free of phosphate and EDTA. 2.
• FEATURES• “Readily” biodegradable per OECD 301B: 64%
• Quickly penetrates, removes grease, oil, grime and tough stains from any washable surface.
• Effective in both cold and warm water.
• Excellent for use in pressure washer and steam cleaning equipment.
• Concentrated for convenience and economy.
• Can be diluted up to 1:100 to provide a single product for all cleaning needs.
• Contains no ammonia, chlorinated or petroleum solvents.
• Free of phosphate, EDTA and nonylphenolethoxylate.
• Safe on all metals.
• Safe on plastics, if rinsed after application.
• NSF registration : A1 (registration number: 111199)
• Approved by DGA – Technical Act 0820-10/DT/ASA/PFA of 09 September 2010. 3.
APPLICATIONS

• Machinery cleaning
• Equipment and parts cleaning
• Pressure washer
• Steam cleaning
• Hard surfaces and fabrics
• Building maintenance
• Marine maintenance
• General cleaning and degreasing
• Driveway, floor cleaning
• Stainless steel, glass, counters
• Automobiles, vans, forklifts, trailers

View Complete Details

Yes, I am interested!

  • CRC Brakleen
  • CRC Brakleen
  • CRC Brakleen
  • CRC Brakleen
  • CRC Brakleen
CRC Brakleen
Interested in this product?
Get Best Quote

CRC Brakleen

Rs 350 / BottleGet Latest Price

Minimum Order Quantity: 48 Bottle

Ideal ForParts Cleaning
Usage/ApplicationIndustrial
BrandOther
Packaging TypeCan
Quantity Per Pack12Pcs
Physical StateLiquid
ColorAmber
I Deal InNew Only
TypeLiquid

CRC BrakleenThe Original Premium Heavy Duty Brake & Parts Cleaner
CRC BrakleenThe Original Premium Heavy Duty Brake & Parts Cleaner
CRC Brakleen is a powerful, heavy duty cleaner and degreaser for brake, clutch parts and general mechanical equipment. It is formulated to quickly and safely dissolve and flush away grease, oil, brake fluid, transmission fluid, hardened deposits and other contaminants, without the need for disassembly. It safely settles and removes hazardous brake dust.
CRC Brakleen is non-staining, non-corrosive, leaves no residue and evaporates quickly.
CRC Brakleen stops disc brake squeal and noise caused by contaminants, eliminates clutch slippage and helps brakes last longer and perform better. Tests by an independent laboratory show that the proper use of Brakleen brake cleaner improves brake efficiency by reducing stopping distances by as much as 24.3%.
CRC Brakleen is ideal for removing grease and contaminates from CV joints and wheel bearings and can also be used to clean, degrease or flush away built up dirt, grease and oil from workshop equipment, tools, other mechanical or industrial machinery and electrical contacts.  (Equipment must be de-energised before cleaning. Fully ventilate equipment before re-energising equipment).
 
Features & Benefits
Powerful brake cleaner and degreaserNo disassembly required -Saves time and reduces maintenance costFast evaporation brake cleaner - Minimises downtimeLeaves no residue - Prevents harmful build up and eliminates rinsing and wipingControlled spray action - Assists cleaning through surface agitationLow surface tension - Gives excellent penetration and ensures superior dissolving and degreasing propertiesSuperior cleaning and degreasing properties - Has many uses beyond brakesMPI Approved C12 (All animal products except dairy)Brakleen / Brakleen Blaster - Asure Quality assessment for food/beverage/dairy factory food areas & no potential contactBrakes last longer and perform better.Helps eliminate disc brake squeal and clutch chatter.Safely settles and removes hazardous brake dust.Stable, non-staining and non-corrosive to metals.Does not contain silicone -Can be painted overAerosol has a 360 degree (upside-down) valve and extension tube-Ensures that all usable product is expelled from the can evenly when the can is held and sprayed in the upside-down position.UsesBrakleen brake cleaner, cleans and degreases brake linings, drums, cylinders, brake shoes, disc brake pads, discs, wedge brakes, springs, calipers, clutch discs, wheel bearings, CV joints, wire ropes, winch cables, dies, moulds, equipment, parts & tools.For cleaning machinery, motors and general mechanical equipment when a vapour degreaser is required. Can also be used to clean electrical contacts. (Equipment must be de-energised before cleaning. Fully ventilate equipment before re-energising equipment).Great for cleaning most parts of your car and bike. Excellent for cleaning clutch and pressure plates prior to overhaul and reassembly. Use on car, truck or motorcycle engines, mowers, outboard motors. Boat, industrial, mining, farming equipment parts, gears and also concrete driveways.Also ideal for flushing away built up dirt, grease and oil that can prevent forklifts and industrial machinery from working efficientlyFor degreasing components prior to reassembly, especially prior to thread-locking. Preparation for the application of engine sealants, paint or lubricant. Ideal for removing grease and contaminates from CV joints and wheel bearingsCar brake cleaner

View Complete Details

Yes, I am interested!

  • CRC FERROKLEEN
  • CRC FERROKLEEN
CRC FERROKLEEN
Interested in this product?
Get Best Quote

CRC FERROKLEEN

Get Latest Price

Grade StandardIndustrial Grade
BrandCRC
Usage/ApplicationIndustrial
Packaging TypeCan
Physical StateLiquid
Quantity Per Pack20L
Packaging Size20L

Professional cleaning of painted and bare metal surfaces contaminated with rust, lime, algae, oils and tar.

Metal cleaner CRC FERROKLEEN PRO 5 L
• Takes rust and rust stains on painted or plastic surfaces away.

• Effective against a wide range of scales.

• Will quickly remove numerous different types of soiling and contamination.

• Safe to be used on most substrates. In case of doubt, test prior to application.

• Slightly foaming for better contact and economic product consumption.

• Prevents damage to the original surface due to excessive scratching.

• Non flammable.

• Composed of > 90% anorganic components and biodegradable organic components.

• Not classified as dangerous for the aquatic environment.  

Application
  • All exterior painted steel structures
  • Ship repair
  • Agricultural machinery
  • Oil derricks and related equipment
 


View Complete Details

Yes, I am interested!

  • CRC BRAKLEEN PRO  - Brake Parts Cleaner Spray 500mL
  • CRC BRAKLEEN PRO  - Brake Parts Cleaner Spray 500mL
  • CRC BRAKLEEN PRO  - Brake Parts Cleaner Spray 500mL
  • CRC BRAKLEEN PRO  - Brake Parts Cleaner Spray 500mL
CRC BRAKLEEN PRO  - Brake Parts Cleaner Spray 500mL
Interested in this product?
Get Best Quote
Packaging TypeBottle
Usage/ApplicationBrake
Packaging Size500Ml
Quantity Per Pack12Can
FoamNo
Bottle MaterialLiquid
Lock TypePush
Product TypeCan
Automation GradeManual

Powerful and fast-drying brake parts cleaner.

Characteristics:

• Multiple active components

• Effectively removes brake fluid, grease and oil

• Reduces squeaking from disc brakes

• Safe on all metal surfaces, does not stain


Benefits:

• Cleans up to 40 brake discs

• Fast evaporation and high cleaning power to minimize downtime

• Pleasant citrus smell

• Easy to handle 360° spray technology

View Complete Details

Yes, I am interested!

CRC Clear Mould Protect
Interested in this product?
Get Best Quote

CRC Clear Mould Protect

Get Latest Price

Coverageask
Typeask
StandardEN
Packaging TypeBottle
Packaging Size12 Pack
Usage/ApplicationIndustrial Use
Shaping ModeFedex
FormLiquid
Gradeask
ColorAmber

CLEAR MOULD PROTECT
Anti - Corrosion Products

CRC CLEAR MOULD PROTECTIVE has been specially formulated for application to mould surfaces after their use to remove any surface moisture and to protect the mould against corrosion during storage.

CRC CLEAR MOULD PROTECTIVE is a clear, non-silicone, protective coating for use on moulds and other metallic parts and components. The transparent, dry film is non-staining and is highly recommended for use with white or clear polymers. The film will not harden or crack and is easily 'moulded-off' when recommencing production.


Short term clear corrosion inhibitor for mould tools.

Non silicone corrosion protection for moulding tools. NSF registered for use in food packaging industry.


• NSF registered H2

• Ideal for short-term inactivity of mould tools, dies and jigs

• Will weaken carbonized polymer residues, during the inactivity time

• Displaces humidity on metal surfaces

• Silicone-free

• No need for cleaning as the product moulds off during the first cycles



View Complete Details

Yes, I am interested!

  • CRC Blue Mould Protect
  • CRC Blue Mould Protect
CRC Blue Mould Protect
Interested in this product?
Get Best Quote

CRC Blue Mould Protect

Rs 1 / BottleGet Latest Price

CoverageDepend on Applications
TypeVariations
StandardEN
Packaging TypeBottle
Packaging Size12 Bottle
Usage/ApplicationIndustrial Use
FormLiquid
ColorAmber
Item Code32837-AA

BLUE MOULD PROTECT
Anti - Corrosion Products

Short term blue colored corrosion inhibitor for mould tools.

Non silicone corrosion inhibitor for moulding tools. NSF registered for use in the food and beverage industry.


 NSF H2 registered

 Ideal for short-term inactivity of mould tools, dies and jigs

 Highly visible blue dye provides an easy visual method for ensuring complete coverage

 Displaces humidity on metal surfaces

 Silicone-free

 No need for cleaning as the product moulds off during the first cycles

Mold release agent Pune
Mold release agent Mumbai
Mold release agent India
Mold release agent Supplier 
CRC Mold release agent 
Mould Protection Spray
Mould Spray

View Complete Details

Yes, I am interested!

  • CRC Chain Lube
  • CRC Chain Lube
CRC Chain Lube
Interested in this product?
Get Best Quote

CRC Chain Lube

Get Latest Price

GradeFOOD GRADE
Usage/ApplicationChain Lube,Bike Chain,Cycle Chain,Conveyor Chain,etc
Unit Pack Size500Ml bulk also
Packaging TypeBottle
Quantity Per Pack12Nos
Product TypeSpray

CRC Food Grade Chain Lube is a special blend of mineral oil and synthetic additives, designed to keep roller drive and conveyor chains lubricated. Foaming action provides outstanding penetration and creeps deep between wire strands, chain links, pins, rollers and sprockets. As the foam subsides it leaves a lubricating non-drying film that remains in place and resists wash-off and sling-off. Specifically designed to provide the convenience of aerosol application where incidental food contact may occur. Regular use will help inhibit corrosion, reduce load stress and greatly extend chain life.

Temperature Range from -20°C to +150°C (continuous), +170°C (intermittent). MPI Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. NSF H1 Registered for incidental food contact.

Features & Benefits
  • Foaming action – For outstanding penetration and coverage. No messy overspray.
  • Penetrates, lubricates, protects – Low viscosity formula creeps deep between wire strands, chain links, pins, rollers and sprockets
  • Reduces friction and wear – Reduces load stress
  • Corrosion protection – Lengthens chain and sprocket life
  • For effective lubrication of all types of chain and conveyor systems – Particularly where incidental food contact may occur
  • Silicone free – Will not harm paint, plastic or wood surfaces. Easier clean-up and removal of excess oil. Allows treated surfaces to be repainted.
  • 360 degree valve – Aerosol can be sprayed from any position even upside down
  • Non-toxic, odourless, tasteless
  • Temperature Range – Effective from -20°C to +150°C (continuous), +170°C (intermittent)
  • MPI Approved C15
  • NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact
  • NSF H1 Registered for incidental food contact
Uses
  • Recommended for use as a lubricant and corrosion inhibitor on conveyor chains, packaging equipment, hoist chains, link and roller assemblies, forklift trucks and many other industrial applications
chain Lube Spray
chain lube bike
chain lube bicycle
Motul C2 Chain Lube for bikes
crc chain lube motorcycle
crc chain lube food grade
crc bike chain lube
3M Chain Lubricant Chain Lube
Chain Lubrication Spray at Best Price in India
Chain lube in Maharashtra
Motul 102981 C2 Chain Lube for bikes (400 ml)
Castrol Chain Lube Racing Spray (400 ml)
3M Chain Lubricant Chain Lube

View Complete Details

Yes, I am interested!

  • CRC SS Cleaner & Polish Spray (INOX KLEEN)
  • CRC SS Cleaner & Polish Spray (INOX KLEEN)
CRC SS Cleaner & Polish Spray (INOX KLEEN)
Interested in this product?
Get Best Quote

CRC SS Cleaner & Polish Spray (INOX KLEEN)

Rs 450 / BottleGet Latest Price

Watch Video

Application SurfaceStainless Steel,Chrome,Aluminum,Appliances,Bathrooms,Fixtures/Equipment,Grills,Hoods,Ovens
Usage/ApplicationSS CLENER
Packaging TypeBottle
BrandCRC
FormYes
Packaging Size500ML
Weight650GRM
MaterialAerosol

Water based, foaming cleaner for degreasing and cleaning shiny metal surfaces.

CRC Inox Kleen is NSF A7,C1 registered for use in the food industry. It eliminates fingerprints, watermarks, dust and dirt from stainless steel. It leaves a protective non-greasy barrier for a long-term original aspect and provides metal surfaces with a long-term staining and contamination resistance. CRC Inox Kleen is also suitable for aluminum, chrome and most plastics (test prior to use).

3M 70071313558 Stainless Steel Cleaner and Polish
3M Stainless Steel Cleaner
3M Stainless Steel Cleaner and Polish - 3M India
3M Stainless Steel Cleaner & Polish
3M SS Cleaner & Polish Spray

View Complete Details

Yes, I am interested!

CRC 3-36 Lubricant And Corrosion Inhibitor
Interested in this product?
Get Best Quote
BrandCRC
Packaging Type12 Pcs Cartoon
Pack Size500ML
Usage/ApplicationIndustrial Use
ApplicationIndustrial Use
FormLiquid
Active ContentChemical
Temperature Range-40 deg C

3-36 MULTI-PURPOSE LUBRICANT & CORROSION INHIBITOR

No. 03006 | Item# 1003257
DESCRIPTION:
A versatile petroleum based compound that forms a clear, thin film that lubricates and protects against wear and corrosion. Multi-purpose product lubricates, protects, displaces moisture, and cleans.
APPLICATIONS:
Tubing, castings, gears, weld rod, wire, fixtures, dies, jigs, shim stock, chucks, drill rod, heat treated parts, machined surfaces, finished welds, aluminum extrusions, air actuated tools, conveyors, frozen joints, locks, hoists, etc.

Generic DescriptionMulti-Purpose Precision Lubricant & Corrosion Inhibitor

View Complete Details

Yes, I am interested!

  • CRC Industrial Degreaser (500ml) Heavy Duty
  • CRC Industrial Degreaser (500ml) Heavy Duty
  • CRC Industrial Degreaser (500ml) Heavy Duty
CRC Industrial Degreaser (500ml) Heavy Duty
Interested in this product?
Get Best Quote
BrandCRC
Packaging TypeBottle
Physical StateLiquid
Packing Size500Ml
Temperature50 deg C
ApplicationsParts Degress

CRC INDUSTRIAL DEGREASER 
1. GENERAL DESCRIPTIONHeavy duty non-chlorinated cleaner.
An innovative solvent blend that contains no chlorinated solvents and no ozone-depleting components. CRC's Industrial Degreaser is excellent for use where rapid turnaround is necessary and low flash point solvents can be used. Dissolves and removes greases, oils, lubricants, adhesives and contaminants from equipment, machinery, motors and metal parts. Especially formulated for degreasing electric motors; the common coating types used on electric windings are not attacked.
2. FEATURESCuts through dirt, penetrates quickly under it.
Attacks encrusted residues.
Fast evaporation to minimize downtime.
Easy "in place" cleaning.
Leaves no residues.
Non-corrosive and non-staining.
Safe on most plastics, coatings and rubbers (test prior to use).Low odor.
Aerosol is equipped with the 360° (upside-down) spray valve and extension tube for added convenience.
Aerosol is pressurized with non-flammable CO2 propellant, giving an active product content of over 97%.
Authorized by USDA for use in the food industry, according K1, K2.
3. APPLICATIONSElectric motors
Pumps
Generators
Bearings
Air tools
Mechanical brakes and clutches
Chains
Sprockets
Wire ropes
Dies
Moulds
Air conditioners and compressors
Fork lift trucks
Material handling equipment
General degreasing and oil removal.

This product degreases and removes oil, grease, wax, dirt and other contaminants which cause failure during production. Furthermore, the fast drying allows a rapid turnaround and it minimise the equipment downtime.  
 
Another benefit of using this product is that it leaves no residue.
 
It can also be used as a carbon remover in food procesing area.

View Complete Details

Yes, I am interested!

Aviation Quick Dry, 11 Wt Oz
Interested in this product?
Get Best Quote
BrandCRC
Packaging TypeBottle
Physical StateLiquid
Packing Size312 g

AVIATION QUICK DRY, 11 WT OZNo. 10340 | Item# 1004736

DESCRIPTION:

A petroleum distillate/alcohol based precision cleaner designed as an alternative to CFC based cleaners. Ideal for applications where lower flashpoint materials can be tolerated. Cost effective, plastic safe & residue free.

APPLICATIONS:

Avionics, printed circuit boards, switches, motors, relays, generators, edge connectors, circuit breakers, fusible connecting devices, terminals, rheostats, aircraft instrumentation & communications equipment.

View Complete Details

Yes, I am interested!

CRC Intake Valve & Turbo Cleaner
Interested in this product?
Get Best Quote
BrandCRC
Packaging TypeBottle
UsageIndustry
Packing Size11 oz (311)

GDI IVD® INTAKE VALVE & TURBO CLEANER, 11 WT OZNo. 05319 | Item# 1003763

DESCRIPTION:

Advanced cleaning technology for intake valves. Dissolves baked-on carbon deposits, improves MPG, increases power and reduces rough idle. Effective for use on GDI and standard PFI engines. Product is not a throttle body cleaner.

APPLICATIONS:

Air intake valves on GDI or standard fuel injected engines

Additional Information:

  • Item Code: 1003763

View Complete Details

Yes, I am interested!

CRC Hand Cleaner
Interested in this product?
Get Best Quote

CRC Hand Cleaner

Rs 1 / PieceGet Latest Price

BrandCRC
UsageIndustrial
Physical StateLiquid
Packaging Size500ML
Grade StandardTechnical Grade
Packing TypeContainer

Product Description1. GENERAL DESCRIPTION

Waterless hand Cleaner containing lanolin.

CRC Hand cleaner is formulated to meet the tough needs of the industrial professional, with hand care as the primary objective. It is based on mild hydrocarbon solvents and biodegradable surfactants. CRC Handcleaner can be used without water and is ideal when working inside or outside where there is no easy access to wash facilities.

2. FEATURES
Removes the most stubborn dirt and grime
Super effective on grease, common paints, ink, glue cements, bitumen, carbon and many other chemical compounds
Can be used with or without water.
Quick cleaning capacity
Contains lanolin to condition the skin
Pleasant perfume odour
Contains no abrasives
Leaves the hands with a smooth soft feel
No disposal problems

3. APPLICATIONS

To clean hands soiled with:
oils and greases
stains and grime
cement and adhesives
bitumen and tar
common paints and inks

Out-cleans soaps:
in industrial plants
in mines
at farms
at construction sites
at home

4. DIRECTIONS
Before use, do not wet hands.
Apply sufficient cleaner (about a teaspoonful) onto dry, soiled hands.
Rub well until completely liquefied and all soiling is loosened.
Just wipe off with paper towel or cloth, or rinse off with water.
Dry hands properly.Avoid eye contact. Keep out of reach of children.
A safety data sheet according EU directive 93/112 is available for all CRC products.

5. TYPICAL(*) PRODUCT DATA

Appearance : semi solid cream

Colour : white

Odour : characteristic perfume odour

Clarity : opaque

Specific gravity (@ 20C) : 1 0,1

pH (5% in water) : 6,25 6,75

Viscosity : 8.000 9.000 cp

Solids content (6 hrs. @ 100C) : 12,0 %

Thermal stability

48 hrs. @ 45C : pass

48 hrs. @ 0C : pass

Properties of the hydrocarbon solvent

Distillation range : 195 245 C

Flash point (closed cup) : 73 C

Aromatics content : < 0,1% wt

|CRCAEROSOL|, |ELECTRICALMAINTENANCESpray|, |CRC226|, |CRCCOCONTACTCLEANER|, |CRC LECTRA CLEAN|, |CRC N F Precision|, |ONLINE CONTACT CLEANER|, |CRC URETHANE ISOLATION RED|, |CRC PLASTIC 70|, |CRC BATTERY TERMINAL COATING|, |CRC 3-36|, |CRC 5-56|, |CRC GASKET REMOVER|, |CRC FAST DRY DEGREASER|, |GALVABRITE|, |CRC RUST REMOVER|, CRC COPPER PASTE, CRC METAL FREE PASTE, CRC HAND CLEANER, CRC ANTI FRICTIONAL TEFLON COATING, CRC FREEZE 75, CRC SP-400, CRC SP - 350



Additional Information:

  • Delivery Time: 4

View Complete Details

Yes, I am interested!

  • CRC Inox Weld Kleen Pickling Paste
  • CRC Inox Weld Kleen Pickling Paste
  • CRC Inox Weld Kleen Pickling Paste
CRC Inox Weld Kleen Pickling Paste
Interested in this product?
Get Best Quote
Physical StateLiquid
BrandCRC
Packaging Size2KG
Grade StandardTechnical Grade
UsageIndustrial
Packaging TypeCan
ColorWater Base

Restores the original characteristics of Stainless Steel after welding.

CRC Inox Weld Kleen is a pickling paste that restores the original characteristics of stainless steel after welding or heat treatment. Degreasing, cleaning, pickling and passivating of austenitic and duplex stainless steel 303, 304, 316,… , nickel and aluminum. Fastworking, very efficient, economical and practical to use.

View Complete Details

Yes, I am interested!

  • LABEL REMOVER SPRAY
  • LABEL REMOVER SPRAY
  • LABEL REMOVER SPRAY
  • LABEL REMOVER SPRAY
LABEL REMOVER SPRAY
Interested in this product?
Get Best Quote

LABEL REMOVER SPRAY

Rs 580 / BottleGet Latest Price

Product Brochure Watch Video

Packaging TypeSpray Bottle
Usage/ApplicationIndustrial Use
TypeBottle Type
FrequencyAsk
Materialask
Motorask
Surface Finishingask
Voltageask

LABEL REMOVER

Download Packshot
Cleaners - Precision
Removes all self-adhesive paper labels and stickers in no time, without leaving residues.
This effective and high-quality adhesive and glue remover works at his best two minutes after wetting the surface.
FEATURES
• No residues left
• Free from CFC’s and HFC’s
• Comes in a handy aerosol packaging
• Time saving
• Dissolves sticky substances
APPLICATIONS
• For all self-adhesive paper labels on most surfaces (test on sensitive plastics & paints)
• Office equipment, cables, boxes, ...
• Household articles

View Complete Details

Yes, I am interested!

Flux SK 10
Interested in this product?
Get Best Quote

Flux SK 10

Get Latest Price

BrandCRC
Packaging Typebottle
Wire TypeWithout Flux
Composition60/40 Tin/Lead
Material TypeChemical
Usage/ApplicationSoldering

The solder-active intermediate protector for printed circuit boards.

An excellent soldering aid (flux), which can be used to prevent oxidation of circuit boards. FLUX SK 10 is suitable for manufacturing, repair and service purposes. Printed circuit boards often need to be soldered at a later stage, and, in most cases, the conductors have oxidised. Soldering can then only be carried out under difficult conditions, as the soldering point overheats and the conductor becomes detached from the substrate material. FLUX SK 10 offers the optimum solution to these problems, since it is an outstanding fluxing agent. 

Features:

+ An intermediate protective lacquer capable of being soldered.

+ Meets the requirements of DIN 8511 F-SW31.

+ Promotes rapid soldering.

+ Prevents cold spots and localised overheating while soldering.

+ Protects circuit boards from corrosion during intermediate storage.

+ Can be applied easily and quickly.

View Complete Details

Yes, I am interested!

  • Kontakt Chemie LABEL OFF 50
  • Kontakt Chemie LABEL OFF 50
Kontakt Chemie LABEL OFF 50
Interested in this product?
Get Best Quote

Kontakt Chemie LABEL OFF 50

Rs 740 / BottleGet Latest Price

Usage/ApplicationIndustrial
Capacity200ML
Grade StandardTechnical Grade
Packaging TypeBottle
Packaging Size200ML
Physical StateLiquid
BrandCRC

LABEL OFF 50

For easy removal of self-adhesive labels.

Removing self-adhesive labels is always a time-consuming task. If the mechanical removal of labels might cause scratches, LABEL OFF 50 is the ideal solution. Saves time, trouble and money. It acts on the adhesive itself, neutralising its adhesion.

Features:

+ A powerful dissolving agent for all paper adhesive labels.

+ Quick and gentle separation of labels from surfaces as glass, china, metal, paper, carton, wood, ...

+ Easy removal of natural greases, resins, finger prints.

View Complete Details

Yes, I am interested!

  • CRC Torch Ceramic Anti Spatter
  • CRC Torch Ceramic Anti Spatter
  • CRC Torch Ceramic Anti Spatter
CRC Torch Ceramic Anti Spatter
Interested in this product?
Get Best Quote

CRC Torch Ceramic Anti Spatter

Rs 1,850 / NumberGet Latest Price

Product Brochure Watch Video

Unit Pack Size400ML
Formask
Usage/ApplicationMIG Welding | Robot Welding
BrandCRC
Packaging TypeBottle
Gradeask
Coloramber
Quantity Per Pack12 Nos

CRCTORCH CERAMIC ANTI-SPAT­TER -

High-performance ceramic anti-spatter spray, providing long lasting protection against spatter build-up on the torch and welding equipment.

Benefits:

  • Eliminates excessive spatter built-up on welding equipment
  • Protects gas nozzles, contact tips and contact tip holders
  • Prevents the adhesion of metal
  • Increase tool life
  • Ensures a free gas flow and free supply of the welding wire
  • Only one treatment needed per shift

 

Applications:

  • MIG/MAG Welding
  • Welding robots

 

Characteristics:

 

  • Leaves a dry, white and thin Ceramic protective coating
  • Long lasting torch protection (±8 hours)
  • Temperature resistant, up to 900ºC in air and up to 2000ºC under inert conditions
  • Silicone free
  • Quick Drying (±15 seconds)
  • Excellent surface adhesion
  • No halogenated components

View Complete Details

Yes, I am interested!

CRC Polymer Remover
Interested in this product?
Get Best Quote

CRC Polymer Remover

Rs 1 / BottleGet Latest Price

Usage/ApplicationMoulding
MaterialPlastic
ShapeRectangular
TechniqueInjection Molding
ColorWhite
Runner TypeHot Runner
Packaging TypeBottle
Automation GradeAutomatic

CRC POLYMER REMOVER

Heavy duty mould cleaner.

Highly effective and powerful solvent blend developed for use on heavily soiled moulds and dies to remove a variety of moulding deposits.


• Foaming action which clings to the mould surface and facilitates a good contact with the contamination

• Removes: plastics, rubbers and resin residues, even when carbonized

• Thixotropic formulation for maximum efficiency, even on vertical surfaces

• Leaves a clean and dry surface after application

View Complete Details

Yes, I am interested!

  • CRC Ejector Lube
  • CRC Ejector Lube
CRC Ejector Lube
Interested in this product?
Get Best Quote

CRC Ejector Lube

Rs 1 / BottleGet Latest Price

BrandCRC
Capacity500ML
Phaseask
MaterialMild Steel
Automation GradeAutomatic
Pressureask
Coloramber

CRC EJECTOR LUBE

Long lasting high performance lubricant for ejector pins.

CRC Ejector Lube has exceptional lubricating power, even under extreme conditions: high temperatures, high pressures, high linear speeds.


• Eliminates seizing problems of ejectors or drawers

• Eliminates creeping of greasy products and contamination on the aesthetic side of moulded parts

• Promotes gas tightness on the ejector level

• Does not carbonize, leaving black imprints on the finished part


View Complete Details

Yes, I am interested!

CRC Triflow
Interested in this product?
Get Best Quote

CRC Triflow

Rs 1 / BottleGet Latest Price

Display TypeAsk
Pressure GaugeAsk
Number Of Steel BallsAsk
BrandCRC
ColorAmber
Automation GradeAutomatic

Crc triflow

durable general lubricant.

multipurpose fluid with ptfe for mould and precision mechanism.


 penetrates into hard-to-reach areas, displaces moisture and cleans

 contains micro particles of ptfe
 durable lubrication thanks to its high quality oils, extreme pressure additives and solid (ptfe) lubricants

 protects against corrosion and humidity

 seals out dirt, dust, sand and other abrasive particles

View Complete Details

Yes, I am interested!

CRC Belt Grip Belt Dressing Spray
Interested in this product?
Get Best Quote
BrandCRC
Unit Pack Size12 PCS BOX
UsageIndustrial
Packaging TypeBottel
Grade StandardBio-Tech Grade
Packaging Size500ML

Product Description

CRC BELT GRIP:

GENERAL DESCRIPTION

Slippage prevention for all types of belts.

CRC Belt Grip is a synthetic polymer based formulation that meets the demands for an industrial and food processing plant belt dressing. It extends the life of belts and pulley bearings by improving traction and allowing runs under reduced belt tension.

FEATURES

Prevents slippage on flat, round and V-belts.
Adheres strongly to any belt material.
Gives extra pulling power, enhances transmission efficiency.
Reduces squeaking noise caused by belt slipping.
Forms a tacky, non-drying, water-resistant, chemically stable film. Compatible with all commonly used
types of belt materials (rubber, leather, fabrics, ...) Aerosols are equipped with a 360° (upside-down)
spray valve and provided with an extension tube for added convenience. Pressurised with CO2 propellant, giving an active product content of 97%. Dry film meets FDA regulation CFR 21-178.3570
for incidental food contact.

APPLICATIONS

Eliminates slippage in flat, round or V-belts made out of rubber, leather, fabrics, plastic,... used in Compressor
Pump
Generators
Fans
Motors
Automobiles
Lift trucks
Conveyors
Industrial machinery

DIRECTIONS
Turn off equipment and stop belts before applying.
Spray a light, even coating on pulling sides of belt (i.e. sides that come in contact with pulleys); let solvent evaporate before re-energising equipment.
Re-apply occasionally to ensure continued high performance.
Removal, if necessary, by CRC Fast Dry Degreaser or CRC Industrial Degreaser (test compatibility with rubber and plastic prior to use).
A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.


CRC Belt Grip is a synthetic polymer based formulation specially developed to meet the demand for a true industrial and automotive food grade belt dressing. It adheres strongly to any commonly used belt material and forms a tacky, non drying, water resistant film that extends belt life by improving traction and reducing belt tension, slipping and dirt build-up. Belts remain pliable and will not glaze or harden while squeaking noise will be reduced.

CRC Belt Grip is designed to be used on leather, rubber, canvas or fabric and is ideally suited for flat, round and V-belts. Not suited for use on multi-V-belts.

Features & Benefits
  • Tacky, non drying, water resistant film – Minimises drive belt slippage, resists water wash off, maintains belt flexibility and prevents loads from slipping on conveyor systems
  • Improves traction and reduces belt tension – Relieving stress on motors, shafts and wheels for improved operating efficiency and extended belt life
  • Colourless – Will not stain finished goods transported on conveyor systems
  • Suitable for most belts and belt material – Flat, round or V belts. Leather, rubber, canvas or fabric
  • Not suitable for multi-V-belts
  • Indoor and outdoor use – Even in difficult hot and/or humid conditions
  • No known ozone depleting chemicals
  • MPI Approved C12
  • Includes Permastraw™ Dual-Action Spray System - One piece actuator with two-way spray that ensures that straw stays in place
Uses
  • Recommended for use in industrial machinery, conveyor systems, portable motorised equipment and vehicle belts
  • Compressors, pumps, generators, fans, motors, automobiles, lift trucks
  • Designed to be used on leather, rubber, canvas or fabric and is ideally suited for flat, round and V-belts. Not suited for use on multi-V-belts.

View Complete Details

Yes, I am interested!

Inox Weld Kleen Pickling Paste
Interested in this product?
Get Best Quote
UsageIndustrial
Physical StateLiquid
BrandCRC
Grade StandardTechnical Grade
Packing TypeCan

Inox Weld Kleen Pickling Paste
Inox Weld Kleen Pickling Paste

 

Pickling paste Pickling paste that restores the original characteristics of stainless steel after welding or heat treatment. Degreasing, cleaning, pickling and passivating of austenitic and duplex stainless steel 303, 304, 316, ..., nickel and aluminum.

 

Product DescriptionPickling paste Pickling paste that restores the original characteristics of stainless steel after welding or heat treatment. Degreasing, cleaning, pickling and passivating of austenitic and duplex stainless steel 303, 304, 316, ..., nickel and aluminum.

Specification:
Inox Weld Kleen 2x2 KG es,pt,it,en,nl,fr,de,sv,fi,da,no

View Complete Details

Yes, I am interested!

Kontaflon 85
Interested in this product?
Get Best Quote

Kontaflon 85

Get Latest Price

Packaging Size200ML
BrandKontaflon
Physical StateLiquid
Grade StandardBio-Tech Grade
UsageIndustrial

KONTAFLON 85

A grease-free PTFE-based lubricant and release agent.

The most important elements in kontaflon 85 are polytetrafluorethylene (PTFE) particles, which give grease-free lubricating and releasing qualities. Wherever high-grade lubricants are required for work in an oil-free environment, kontaflon 85, the practically invisible wax-like lubricant, sets new standards. 

Features:

+ Surfaces sprayed with KONTAFLON 85 have the typical characteristics of PTFE:

• Water-repellent

• Tack-free

• Does not soil or grease

• Non-conductive

• Resistant to temperatures ranging from 50°C to 260°C

• Non-flammable after evaporation of solvent

• Resistant to chemicals.

+ Good adhesion properties due to a small amount of binder.

+ Optimum alternative to mineral oil wherever clean, colourless, grease-free lubricants and release agents are required.



Additional Information:

  • Item Code: 80009-AE
  • Delivery Time: 4-5 Days

View Complete Details

Yes, I am interested!

Kontakt Chemie Plastik 70
Interested in this product?
Get Best Quote

Kontakt Chemie Plastik 70

Rs 350 / BottleGet Latest Price

Minimum Order Quantity: 48 Bottle

Packaging TypeBottle
ColorTransparent
BrandCRC
ApplicationIndustrial Use
Packaging Size500Ml
Grade StandardTechnical Grade
MoldsPlastic

PLASTIK 70
Anti - Corrosion Products

The universal conformal coating for printed circuit boards.
A fast drying, transparent, acrylic coating, with good dielectric properties. It shields printed circuit boards or other parts from corrosive (atmospheric) influences. This film protects printed circuit boards from leakage currents and short circuits. 
Features:
+ Provides a protective and insulating film against atmospheric influences such as moisture, oxidation, dust or corrosive vapours.
+ Good adhesion on metal, plastic, wood, glass, ...
+ The film is resistant to diluted acids, alkalines and atmospheric attack.
+ Can be soldered through.
+ Prevents sparking and corona effects.
+ Remains transparent and flexible even after a long period.
+ Temperature range: -40°C to +60°C.
Crc Aerosol, Electrical Maintenance Spray, Crc 2-26, Crc Co Contact Cleaner, Crc Lectra Clean, Crc N F Precision, Online Contact Cleaner, Crc Urethane Isolation Red, Crc Plastic 70, Crc Battery Terminal Coating, Crc 3-36, Crc 5-56, Crc Gasket Remover, Crc Fast Dry Degreaser, Galvabrite, Crc Rust Remover, Crc Copper Paste, Crc Metal Free Paste, Crc Hand Cleaner, Crc Anti Frictional Teflon Coating, Crc Freeze 75, Crc Sp-400, Crc Sp - 350

PLASTIK 70 was specially developed to protect printed circuit boards. It overcomes electrical leakages and short circuits. As a low viscosity fixing and insulating lacquer, PLASTIK 70 can also be used as extra/after insulation of coils and transformers and overcomes disturbing noises. PLASTIK 70 can also be used as a universal protective coating on any surface like metal, paper, ornaments, paintings, furniture, etc.

Additional Information:

  • Delivery Time: 2-5 Days

View Complete Details

Yes, I am interested!

CRC Zinc Primer
Interested in this product?
Get Best Quote

CRC Zinc Primer

Rs 410 / SetGet Latest Price

Minimum Order Quantity: 12 Set

BrandCRC
Usage/ApplicationZinc Coating
ColorGray
Primer Base TypeLatex Based
FormLiquid
FinishSatin

CRC ZINC PRIMER

 

Corrosion protective primer, easy to paint over.

 

A Zinc-Phosphate primer for metal surfaces. Dries quickly. Improves adhesion of the finishing coating. A corrosion protective additive slows down corrosion. Can be painted over with all kinds of single component paints, already after one hour.

 

1. GENERAL DESCRIPTION

Multi-purpose zinc phosphate primer.

A zinc phosphate based, fast drying protective primer for metal surfaces. Formulated with

modified alkyd resins, zinc phosphate and other anti-corrosion pigments. Zinc Primer fights

rust and gives longer lasting interior and exterior corrosion resistance to topcoats.

 

2. FEATURES

• Ensures better topcoat adhesion and coverage.

• Retains topcoat colour brilliance.

• Grey colour is suitable even for light topcoat colours.

• Repaintable with all one-component paints, already after 1 hour.

• Slows down rust by inhibition and complex building.

• Saves pre-paint time by quickly filling hairline cracks and slight imperfections.

• Fast drying.

• Strong adhesion on degreased, bare metal surfaces. Surface preparation (e.g. by sanding,

scraping, …) may be needed for oxidised or galvanised surfaces.

• Totally lead and chromate free.

• No chlorinated and no aromatic solvents.

• Aerosols use dimethylether (DME) propellant for controlled application and film properties.

 

3. APPLICATIONS

• Car bodywork

• Farm machinery and equipment

• Boat fittings

• Steel building elements

• Metal windows

• Chassis and frames

• Seams

• Spot welds

 

4. DIRECTIONS

• Shake aerosol can very well for at least one minute after agitator ball is free. Stir or mix

bulk product well to obtain a homogeneous dispersion. Repeat frequently while using.

• Apply to a clean, degreased, dry surface for best results. Remove rust and scale with a

wire brush.

• Apply in light, even coats; best results are obtained with 2 lighter rather than 1 heavy coat.

Topcoat is best applied after 12 to 48 h. A slight sanding is advised.

• When spraying is finished, clean aerosol valve by turning can upside down and press

button until only propellant escapes. If clogging occurs, remove button and clean orifice

with fine wire.

Rust & Corrosion Protection Products
Cold Galvanizing Spray
CRC Galva Brite

View Complete Details

Yes, I am interested!

  • CRC Robosure Anti Spatter
  • CRC Robosure Anti Spatter
CRC Robosure Anti Spatter
Interested in this product?
Get Best Quote

CRC Robosure Anti Spatter

Rs 200 / LitreGet Latest Price

MaterialAerosol
Unit Pack SizeBulk
Packaging Size5LTR
PackagingCan
BrandCRC
Model Number/NameROBOSURE
Packaging Typecan
FrequencyASK

Product Description

Robosure protects welding robots, jigs, callipers and other equipment from welding spatters. Does not contain solvents. Cleans the equipment without the need for flushing, leaving a protective layer for indoor storage.



Description :

  • Composition Robosure protects welding robots, clamping devices, callipers, or other apparatus before metal droplets.


Solvent-free.

  • Purify device without rinsing and thereby leaving the protective layer inside the storage room.


Features:

  • Excellent protection welding robots and surrounding equipment against a splash of welding.
  • ideal alternative to traditional solvents and highly alkaline cleaners.
  • Protects metals and alloys.
  • Temporary preservation of metal parts during storage.
  • Non-flammable.
  • Silicone-free.
  • Safe on all metal surfaces does not stain.
  • Safe on most rubbers, plastics and surfaces. Before use, test on sensitive or stressed materials.
  • Economical use due to the thin film. Extended nozzle reduces the increased stability of the welding arc, ensuring free gas flow.
  • Naturally biodegradabl

|Welding Anti Spatter Supplier|
|Welding Anti Spatter Water Base|
|Calguard Anti Spatter Spray|
|Paintable Anti Spatter| 

Welding Anti ASpatter ASupplier
Welding Anti Spatter Water Base
Paintable Anti Spatter 
Calguard Anti-Spatter Spray
Water Based Anti Spatter Spray
Water Base Anti Spatter Spray - Manufacturers & Suppliers in India
Anti Spatter Spray - Manufacturers & Suppliers in India
Anti Spatter Spray Manufacturers, Suppliers & Exporters
Welding Protections Product - Anti Spatter Nozzle Gel
Anti Spatter Spray Manufacturer,Wholesale Anti Spatter Spray

View Complete Details

Yes, I am interested!

  • CRC Power Stick
  • CRC Power Stick
CRC Power Stick
Interested in this product?
Get Best Quote

CRC Power Stick

Rs 1 / BottleGet Latest Price

Product Brochure

Surface Of ApplicationWood, Plastic, Paper, Canvas, Leather, Metal
Packaging Size500ml
BrandCRC
ColorAEROSOL
Packaging TypeBOTTEL
Chemical PropertiesAEROSOL
Model Name/NumberPOWER STIC
Quantity Per Pack12 PcS PCK

CRC POWER STICK -  Adhesive, Styrene Isoprene Copolymer, Transparent, Aerosol, 500 ml

1. GENERAL DESCRIPTION CRC Power Stick is a high strength adhesive, formulated without Methylene Chloride or other chlorinated solvents. 2. FEATURES • High strength formulation • Longer open bond time - allows large areas to be covered before film dries • Economical, good coverage • Free from chlorinated solvents 3. APPLICATIONS Spray Adhesive Power Stick will provide high-strength bonds in many different areas: • Chipboard and Concrete • Insulation Materials and Carpets • Canvas and Leather • Paper, Wood and Cork • Metal, Plastic and Rubber 4. DIRECTIONS • Apply an even coating to both surfaces to be bonded from 25 – 30 cm distance. • Wait until the adhesive is tack-dry. • Bond the surfaces together using firm pressure. • To prevent blockages, invert the can after use and spray to clear the nozzle. N.B. May affect certain plastics. Always test on a small, inconspicuous area before general use. • A safety data sheet (MSDS) according to EU directive 91/155/EEC and amendments is available for all CRC products.

View Complete Details

Yes, I am interested!
4.2/5★★★★★★★★★★

Reviewed by 30 Users

5 star21

4 star3

3 star1

2 star2

1 star3

User Satisfaction

Response85%

Quality100%

Delivery100%

Most Relevant Reviews

J

Jithendar Rao ★★★★★ ★★★★★

12-February-21

hii

C

CJ Jacob ★★★★★ ★★★★★

17-March-18

Nice

Get in touch with us

Reach Us

S. B. EnterprisesShree Chamber, No. 416, Near Gurudwara, Ganesh Peth, Pune-411002, Maharashtra, India

Burhan Nuruddin (Business Partner)

View Mobile Number87% Call Response Rate

Send SMS
Send Email
Send Payment
Leave a Message, we will call you back!
Send your enquiry to this supplier
I agree to the terms and privacy policy

We Accept Online Payments

All Rights Reserved (Terms of Use)