X
View Mobile Number90% Response Rate
Hi
terms privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Hi
terms privacy policy
Verifying...
1

Have a requirement?
Get Best Price

APC Back UPS

Offering you a complete choice of products which include APC BX600C-IN 230V Back UPS, APC BX1100C-IN 230V Back UPS, APC BE700Y-IND 230V Back UPS, APC BE800-IND 230V Back UPS, APC BX1000UXI 230V Back UPS and APC BX2000UXI 230V Back UPS.

  • APC BX600C-IN 230V Back UPS
  • APC BX600C-IN 230V Back UPS
  • APC BX600C-IN 230V Back UPS
  • APC BX600C-IN 230V Back UPS
APC BX600C-IN 230V Back UPS
Interested in this product?
Get Best Quote
Maximum Depth237 mm, 23.7 cm
Maximum Height218 mm, 21.8 cm
Maximum Width107 mm, 10.7 cm
Shipping Depth310 mm, 31.0 cm
Shipping Width165 mm, 16.5 cm
Storage Elevation0-15000 Meters
TopologyLine Interactive
Battery TypeMaintenance-free sealed Lead-Acid battery with suspended electrolyte leakproof
Storage Temperature-15 to 45 Degree C
Operating Temperature0 - 40 Degree C
Surge Energy Rating255 Joules
BrandAPC By Schneider
Cord Length1.22 Meters
Type Maintenance Free12 V, 7.2 Ah
Frequency On Battery50 Hz typical
Input Voltage range For Main Operations145 - 290 V
Brownout Transfer145 VAC Typical
Over Voltage Transfer290 VAC typical
UPS Capacity600 VA / 360 W
Nominal Output Voltage230 V
Output Frequency sync to mains47 - 63 Hz
Waveform TypeStepped Approximation To A Sinewave
Nominal Input Voltage230 V
Operating Elevation0-3000 Meters
Input frequency47 - 63 Hz
Input ConnectionsIndia 3-pin 6A
Replacement BatteryAPCRBC110
Number of Power Cords1
Typical Recharge Time6 hour(s)
Net Weight4.7 Kg
Shipping Weight5.2 Kg
Output Power Capacity360 Watts / 600 VA
Shipping Height295 mm, 29.5 cm
Operating Relative Humidity0 - 95 %
Storage Relative Humidity0-95 %
ApprovalsBIS Approved
Max Configurable Power360 Watts / 600 VA
Standard Warranty2 Years Repair Or Replace
REACHContains No SVHCs
Power Cord1.2 Meters
Dimensions H x W x D21.8 cm x 10.7 cm x 23.7 cm

Features :

  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery charging indicator: Lets you know when your battery is charging and when it is fully charged.
  • Battery Saver: Extends battery life by preventing unnecessary discharges while the UPS is on battery.
  • Boost Automatic Voltage Regulation (AVR): Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Fast battery charging capability: Allows for reduced battery recharge time, prevents disturbances on the distribution system by correcting the power factor, protects the battery against damage caused by deep discharge and provides backfeed protection.
  • Generator compatibility: Allows you to recharge your battery while on generator power.
  • LED Indicators: Provide easy-to-read status of the unit and utility power conditions.
  • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • LED status display: Quickly understand unit and power status with visual indicators.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Surge-only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
  • Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
  • Control panel: LED status display with On Line: On Battery: Replace Battery and Building Wiring Fault
  • Audible Alarm: Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm

View Complete Details

Yes, I am interested!

  • APC BX1100C-IN 230V Back UPS
  • APC BX1100C-IN 230V Back UPS
  • APC BX1100C-IN 230V Back UPS
  • APC BX1100C-IN 230V Back UPS
APC BX1100C-IN 230V Back UPS
Interested in this product?
Get Best Quote
Shipping Width203 mm, 20.3 cm
Maximum Width132 mm, 13.2 cm
Battery TypeMaintenance-free sealed Lead-Acid battery with suspended electrolyte leakproof
Storage Temperature-15 to 45 Degree C
Operating Temperature0 - 40 Degree C
BrandAPC By Schneider
ColorBlack
Input ConnectionsIndia 3-pin 6A
Input frequency45 - 65 Hz (auto sensing)
Input voltage range for main operations145 - 290 V
Shipping weight10.21 Kg
Number of Power Cords1
Input Efficiency at Full Load72.0 %
Typical recharge time6 Hour(s)
Surge energy rating255 Joules
Output power capacity660 Watts / 1.1 kVA
Net Weight8.98 Kg
Shipping Height394 mm, 39.4 cm
Standard warranty1 year repair or replace
Operating Relative Humidity0 - 95 %
Operating Elevation0-3000 Meters
Storage Relative Humidity0 - 95 %
Audible noise from surface of unitat 1 meter 45.0 dBA
Max Configurable Power660 Watts / 1.1 kVA
ApprovalsBIS Approved
REACHContains No SVHCs
Cord Length1.52 Meters
Nominal Output Voltage230 V
Efficiency at Full Load72.0 %
Output Frequency sync to mains50 Hz
Waveform typeStepped approximation to a sinewave
Nominal Input Voltage230 V

Features :
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Automatic Voltage Regulation (AVR): Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
  • Battery charging indicator: Lets you know when your battery is charging and when it is fully charged.
  • Battery Saver: Extends battery life by preventing unnecessary discharges while the UPS is on battery.
  • Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Fast battery charging capability: Allows for reduced battery recharge time, prevents disturbances on the distribution system by correcting the power factor, protects the battery against damage caused by deep discharge and provides backfeed protection.
  • Generator compatibility: Allows you to recharge your battery while on generator power.
  • LED Indicators: Provide easy-to-read status of the unit and utility power conditions.
  • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • LED status display: Quickly understand unit and power status with visual indicators.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
  • Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
  • Control panel: LED status display with On Line: On Battery: Replace Battery and Overload indicators
  • Audible Alarm: Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm
  • Four battery backed outlets with continuous surge protection and one surge only
  • Battery Saver: Increases battery life up to two times. Experience consistent runtime through the battery life.
  • Compatible with low power loads e.g. wifi router, DSL modem
  • Cold start capability allows the load to power on just on battery
  • Automatic Voltage Regulation (AVR) corrects incoming voltage
  • Beeper Delay: Stays quiet during changeover from mains to generator
  • Separate Charging LED

View Complete Details

Yes, I am interested!

  • APC BE700Y-IND 230V Back UPS
  • APC BE700Y-IND 230V Back UPS
APC BE700Y-IND 230V Back UPS
Interested in this product?
Get Best Quote
Maximum Depth290 mm,29.0 cm
Maximum Height130 mm,13.0 cm
Maximum Width220 mm,22.0 cm
Shipping Depth410 mm,41.0 cm
Shipping Width270 mm,27.0 cm
TopologyLine Interactive
Battery TypeMaintenance-free sealed Lead-Acid battery with suspended electrolyte leakproof
Storage Temperature-5 to 45 Degree C
Operating Temperature0 - 40 Degree C
BrandAPC By Schneider
Input frequency50 Hz +/- 3 Hz
Nominal Output Voltage230 V
Efficiency at Full Load95.0 %
Surge energy rating160 Joules
Output Frequency sync to mains47 - 63 Hz
Output Frequency not synced50 Hz +/- 0.1% for 50 Hz nominal
Waveform typeStepped approximation to a sinewave
Cord Length1 Meters
Nominal Input Voltage230 V
Number of Power Cords1
Input Efficiency at Full Load95.0 %
Operating Elevation0-3000 Meters
Typical recharge time6 Hour(s)
Expected Battery Life2 - 4 years
RBC Quantity1
Output power capacity420 Watts / 700 VA
Interface Port sUSB
FilteringFull time multi-pole noise filtering 5% IEEE surge let-through zero clamping response time mee
Net Weight7.8 Kg
Shipping weight9.0 Kg
Shipping Height170 mm,17.0 cm
Max Configurable Power420 Watts / 700 VA
Storage Relative Humidity0-95 %
Operating Relative Humidity0 - 95 %
Input ConnectionsIndia 3-pin 6A
Audible Noise From Surface of Unit1 meter 45.0 dBA
Online thermal dissipation42.68 BTU/hr
Standard Warranty2 Years Repair Or Replace
RoHSCompliant
REACHContains No SVHCs

Features :
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • LED Indicators: Provide easy-to-read status of the unit and utility power conditions.
  • USB connectivity: Provides management features of the UPS via a USB port (not available on all models).
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

 

Back-UPS Features & Benefits
  • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • LED status display: Quickly understand unit and power status with visual indicators.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
  • Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
  • Control panel: LED status display with On Line: On Battery: Replace Battery and Overload indicators
  • Audible Alarm: Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm

 

Other Details:

  • Three battery back-up outlets with surge protection for computers, modems, routers etc.
  • One surge protection-only outlet protects hardware like scanners and printers etc.
  • Power on button provides power to connected equipment.
  • Communication port in BE700Y-IND enables PC communication for graceful shutdown.
  • Push-button circuit breaker provides easy recovery from an overload or short circuit.
  • Automatic voltage regulation (AVR) instantly corrects incoming utility power without utilizing the battery.

View Complete Details

Yes, I am interested!

APC BE800-IND 230V Back UPS
Interested in this product?
Get Best Quote
Maximum Depth290 mm,29.0 cm
Maximum Height130 mm,13.0 cm
Shipping Width270 mm,27.0 cm
Maximum Width220 mm,22.0 cm
Shipping Depth410 mm,41.0 cm
Storage Elevation0-9000 Meters
Battery TypeMaintenance-free sealed Lead-Acid battery with suspended electrolyte leakproof
Storage Temperature0 - 45 Degree C
Operating Temperature0 - 40 Degree C
BrandAPC By Schneider
TopologyLine Interactive
Input frequency50 Hz +/- 3 Hz
Online thermal dissipation42.68 BTU/hr
Standard warranty2 Years Repair or Replace
Input ConnectionsIndia 3-pin 6A
RoHSCompliant
REACHContains No SVHCs
Nominal Output Voltage230 V
Efficiency at Full Load95.0 %
Output Frequency sync to mains47 - 63 Hz
Output Frequency not synced50 Hz +/- 0.1% for 50 Hz nominal
Waveform typeStepped approximation to a sinewave
Net Weight9.0 Kg
Nominal Input Voltage230 V
Number of Power Cords1
Input Efficiency at Full Load95.0 %
Typical recharge time8 Hour(s)
Expected Battery Life2 - 4 years
Surge energy rating160 Joules
FilteringFull time multi-pole noise filtering5% IEEE surge let-throughzero clamping response timemeetsUL
Output power capacity480 Watts / 800 VA
Shipping weight10.0 Kg
Shipping Height170 mm,17.0 cm
Operating Relative Humidity0-95 %
Operating Elevation0-3000 Meters
Max Configurable Power480 Watts / 800 VA
Storage Relative Humidity0-95 %
Audible Noise From Surface of Unit1 meter 45.0 dBA

Features :
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • LED Indicators: Provide easy-to-read status of the unit and utility power conditions.
  • USB connectivity: Provides management Features of the UPS via a USB port (not available on all models).
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

 

Back-UPS Features & Benefits
  • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • LED status display: Quickly understand unit and power status with visual indicators.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
  • Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
  • Control panel: LED status display with On Line: On Battery: Replace Battery and Overload indicators
  • Audible Alarm: Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm

 

Other Details:

  • Three battery back-up outlets with surge protection for computers, modems, routers etc.
  • One surge protection-only outlet protects hardware like scanners and printers etc.
  • Power on button provides power to connected equipment.
  • Push-button circuit breaker provides easy recovery from an overload or short circuit.
  • Automatic voltage regulation (AVR) instantly corrects incoming utility power without utilizing the battery.

View Complete Details

Yes, I am interested!

  • APC BX1000UXI 230V Back UPS
  • APC BX1000UXI 230V Back UPS
  • APC BX1000UXI 230V Back UPS
  • APC BX1000UXI 230V Back UPS
APC BX1000UXI 230V Back UPS
Interested in this product?
Get Best Quote
Maximum Depth392 mm,39.2 cm
Maximum Height220 mm,22.0 cm
Maximum Width145 mm,14.5 cm
Shipping Depth477 mm,47.7 cm
Shipping Width235 mm,23.5 cm
Storage Elevation0-3000 Meters
TopologySquare
Battery TypeNo internal battery - uses external battery system
Storage Temperature0 - 45 Degree C
Operating Temperature0 - 40 Degree C
BrandAPC By Schneider
Transfer Time8 ms Typical,12 ms Maximum
Input ConnectionsIndia 3-pin 6A
Operating Elevation0-900 Meters
Storage Relative Humidity0-95 % non-condensing
Audible Noise From Surface of Unit1 Meter 50.0 dBA
Standard Warranty2 Years Repair Or Replace
Max Configurable Power600 Watts / 1.0 kVA
Nominal Output Voltage230 V
Efficiency at Full Load92.0 %
Output Frequency not synced50 Hz +/- 1 Hz
Waveform typeStepped approximation to a sinewave
Nominal Input Voltage230 V
Cord Length0.46 Meters
Input frequency40 - 70 Hz
Input Efficiency at Full Load92.0 %
Net Weight9.3 Kg
Shipping weight10.2 Kg
Shipping Height335 mm,33.5 cm
Output power capacity600 Watts / 1.0 kVA
Pallet Weight41.89 lbs
Operating Relative Humidity0 - 95 %

Introducing the Most Flexible UPS
  • Stabilizes voltage to protect your IT equipment (Double boost and single trim)
  • SMF/Tubular compatible
  • 5/10/15/20A selectable charging current -connect any size battery
  • 4 Indian output sockets in 1kVA and output terminal block in 2kVA

Features :

  • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • LED status display: Quickly understand unit and power status with visual indicators.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Surge-only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
  • Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
  • Control panel: LED Status display with On Line: On Battery

View Complete Details

Yes, I am interested!

  • APC BX2000UXI 230V Back UPS
  • APC BX2000UXI 230V Back UPS
  • APC BX2000UXI 230V Back UPS
APC BX2000UXI 230V Back UPS
Interested in this product?
Get Best Quote
Storage Temperature0 - 45 Degree C
Operating Temperature0 - 40 Degree C
BrandAPC By Schneider
Input frequency40 - 70 Hz
Operating Relative Humidity0 - 95 %
Operating Elevation0-900 Meters
Storage Relative Humidity0-95 % non-condensing
Audible Noise From Surface of Unit1 Meter 50.0 dBA
Standard Warranty2 Years Repair Or Replace
Max Configurable Power1.2 kW / 2.0 kVA
Nominal Output Voltage230 V
Efficiency at Full Load92.0 %
Output Frequency sync to mains50 Hz +/- 1 Hz
Waveform typeStepped approximation to a sinewave
Output ConnectionsHard Wire 3-wire (H N + G) (Battery Backup)
Nominal Input Voltage230 V
Cord Length0.46 Meters
Input Efficiency at Full Load92.0 %
Net Weight13.4 Kg
Shipping weight14.3 Kg
Shipping Height335 mm, 33.5 cm
Output power capacity1.2 kW / 2.0 kVA

Introducing the Most Flexible UPS
  • Stabilizes voltage to protect your IT equipment (Double boost and single trim)
  • SMF/Tubular compatible
  • 5/10/15/20A selectable charging current -connect any size battery
  • 4 Indian output sockets in 1kVA and output terminal block in 2kVA

Features :

  • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • LED status display: Quickly understand unit and power status with visual indicators.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Surge-only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
  • Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
  • Control panel: LED Status display with On Line: On Battery

View Complete Details

Yes, I am interested!

  • APC BR1000G-IN 230V Back UPS
  • APC BR1000G-IN 230V Back UPS
  • APC BR1000G-IN 230V Back UPS
APC BR1000G-IN 230V Back UPS
Interested in this product?
Get Best Quote
Shipping Width229 mm,22.9 cm
Maximum Width114 mm,11.4 cm
Battery TypeMaintenance-free sealed Lead-Acid battery with suspended electrolyte leakproof
Storage Temperature-15 to 45 Degree C
Operating Temperature0 - 40 Degree C
BrandAPC By Schneider
Typical Recharge Time7.4 Hour(s)
Audible Noise From Surface of Unit1 Meter 45.0 dBA
Cord Length1.52 Meters
Efficiency at Full Load84.0 %
Expected Battery Life2 - 4 years
Extendable Run Time1
Input ConnectionsIndia 3-pin 6A
Input Efficiency at Full Load84.0 %
Input frequency50/60 Hz +/- 3 Hz (auto sensing)
Input voltage range for main operations150 - 280 V
Interface Port sUSB
Master Carton Units2.0
Master Carton Weight27.2 gm
Max Configurable Power600 Watts / 1.0 kVA
Net Weight11.35 kg
Nominal Input Voltage230 V
Nominal Output Voltage230 V
Number of Power Cords1
Operating Elevation0-3000 Meters
Operating Relative Humidity0 - 95 %
Output Frequency sync to mains50/60 Hz +/-1 Hz
Output power capacity600 Watts / 1.0 kVA
RBC Quantity1
REACHContains No SVHCs
RoHSCompliant
Shipping Height381mm,38.1 cm
Shipping weight12.77 kg
Standard Warranty2 Years Repair Or Replace
Storage Relative Humidity0-95 %
Surge energy rating680 Joules
Waveform typeStepped approximation to a sinewave

Features :
  • Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Battery replacement without tools: Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
  • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
  • Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit.
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Dataline surge protection: Provides protection of connected equipment from power surges on the data lines.
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms.
  • Power-saving outlets: Automatically cuts power to idle equipment to conserve electricity.
  • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
  • Serial connectivity: Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
  • USB connectivity: Provides management of the UPS via a USB port (not available on all models).
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Customizable voltage-transfer points: Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

View Complete Details

Yes, I am interested!

  • APC BR1500G-IN 230V Back UPS
  • APC BR1500G-IN 230V Back UPS
  • APC BR1500G-IN 230V Back UPS
APC BR1500G-IN 230V Back UPS
Interested in this product?
Get Best Quote
Maximum Depth382 mm, 38.2 cm
Maximum Height301 mm, 30.1 cm
Maximum Width114 mm, 11.4 cm
Shipping Depth483 mm, 48.3 cm
Shipping Width229 mm, 22.9 cm
Storage Elevation0-15000 meters
TopologyLine Interactive
Battery TypeMaintenance-free sealed Lead-Acid battery with suspended electrolyte leakproof
Storage Temperature-15 to 45 Degree C
Operating Temperature0 - 40 Degree C
BrandAPC By Schneider
ColorBlack
Transfer Time6 ms Typical, 10 ms Maximum
Input ConnectionsIndia 3-pin 16A
Interface Port sUSB
Output power capacity865 Watts / 1.5 kVA
Surge energy rating680 Joules
Net Weight11.76 kg
Shipping weight13.19 kg
Shipping Height381 mm, 38.1 cm
Master Carton Units2.0
Max Configurable Power865 Watts / 1.5 kVA
SCC Codes1073130426879 3
Operating Relative Humidity0 - 95 %
Cord Length1.52 meters
Operating Elevation0-3000 meters
Storage Relative Humidity0 - 95 %
Audible noise from surface of unit1 meter 45.0 dBA
Standard warranty2 years repair or replace
RoHSCompliant
REACHContains No SVHCs
Nominal Output Voltage230 V
Efficiency at Full Load85.0 %
Output Frequency sync to mains50/60 Hz +/-1 Hz
Waveform typeStepped approximation to a sinewave
Input voltage range for main operations160 - 280 V
Nominal Input Voltage230 V
Input frequency50/60 Hz +/- 3 Hz (auto sensing)
Number of Power Cords1
Input Efficiency at Full Load85.0 %
Typical recharge time7.2 hour(s)
Expected Battery Life2 - 4 years
Replacement battery cartridge note9 Ah x 2 internal batteries
RBC Quantity1

Features :
  • Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Battery replacement without tools: Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
  • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
  • Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit.
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Dataline surge protection : Provides protection of connected equipment from power surges on the data lines.
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms.
  • Power-saving outlets: Automatically cuts power to idle equipment to conserve electricity.
  • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
  • Serial connectivity: Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
  • USB connectivity: Provides management of the UPS via a USB port (not available on all models).
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Customizable voltage-transfer points: Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

View Complete Details

Yes, I am interested!
Tell us what you need, and we’ll help you get quotes
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Tell us what you need, and we’ll help you get quotes
terms privacy policy