X
View Mobile Number93% Response Rate
Hi
terms privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Hi
terms privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Our Product Range

+View All

APC Smart UPS Online

Manufacturer of a wide range of products which include APC SRC1KI-IN 230V Smart UPS Online, APC SURTD5000XLI-CC 230V Smart UPS Online, APC SRC1KUXI 230V Smart UPS Online, APC SRC2KUXI 230V Smart UPS Online, APC SRC3KUXI 230V Smart UPS Online and APC SRC5KUXI 230V Smart UPS Online.

  • APC SRC1KI-IN 230V Smart UPS Online
  • APC SRC1KI-IN 230V Smart UPS Online
  • APC SRC1KI-IN 230V Smart UPS Online
APC SRC1KI-IN 230V Smart UPS Online
Interested in this product?
Get Best Quote
BrandAPC By Schneider
Battery TypeMaintenance-free sealed Lead-Acid battery with suspended electrolyte leakproof
Load Crest Factor3 1
Maximum Depth400 mm,40.0 cm
Maximum Height220 mm,22.0 cm
Maximum Width145 mm,14.5 cm
Shipping Depth478 mm,47.8 cm
Shipping Width235 mm,23.5 cm
Storage Elevation0-4500 meters
Operating Temperature0 - 40 Degree C
Storage Temperature-20 to 60 Degree C
BypassBuilt-in Bypass
TopologyDouble Conversion Online
Output power capacity800 Watts / 1.0 kVA
Nominal Output Voltage230 V
Operating Elevation0-900 meters
Storage Relative Humidity0 - 95 %
Standard warranty2 years repair or replace
Efficiency at Full Load90.0 %
Output Voltage DistortionLess than 2%
Output Frequency sync to mains50/60 Hz +/- 3 Hz
Other Output Voltages220 V,240 V
Waveform typeSine wave
Interface PortsDB-9 RS-232,Smart-Slot
Nominal Input Voltage230 V
Input frequency40 - 70 Hz
Input ConnectionsIndia 3-pin 6A
Cord Length1.52 meters
Input voltage range for main operations110 - 280 V (half load)
Number of Power Cords1
Typical recharge time6 Hour(s)
Max Configurable Power800 Watts / 1.0 kVA
Net Weight13.5 kg
Shipping weight14.5 kg
Shipping Height340 mm,34.0 cm
Pallet Weight1686.54 lbs
Units per Pallet50.0
Operating Relative Humidity0 - 95 %

Features:
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Excellent footprint: Small UPS footprint provides maximum usage of valuable electrical room floorspace
  • Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Generator compatibility: Allows you to recharge your battery while on generator power.
  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Intelligent Battery Charging: Microprocessor controlled, 3-stage regulated charging ensures the fastest recharge times without decreasing battery life.
  • LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
  • Serial connectivity: Provides management of the UPS via a serial port.
  • Sine wave output: Eliminates humming and heat generated when powering tube lights and fans.
  • SmartSlot: Customize UPS capabilities with management cards.
  • Wide input voltage range: Designed for harsh electrical environments to save battery life.

Availability:
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Scalable runtime: Allows additional run time to be quickly added as needed.

Marketing Features:
  • Save time with easy and convenient remote/network accessibility: Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
  • Low operating and maintenance costs with proven reliability and intelligent battery management: Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self-tests insures battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
  • Peace of mind that comes with full equipment compatibility and reliability of a leader: Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
  • Avoids costly power problems by keeping your IT equipment and data protected and available: Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation, and zero transfer time to battery during power events.

View Complete Details

Yes, I am interested!

  • APC SURTD5000XLI-CC 230V Smart UPS Online
  • APC SURTD5000XLI-CC 230V Smart UPS Online
APC SURTD5000XLI-CC 230V Smart UPS Online
Interested in this product?
Get Best Quote
BrandAPC By Schneider
Load Crest Factor3 1
Maximum Depth660 mm,66.0 cm
Maximum Height432 mm,43.2 cm
Maximum Width130 mm,13.0 cm
Shipping Depth980 mm,98.0 cm
Shipping Width603 mm,60.3 cm
Storage Elevation0-15000 meters
TopologyDouble Conversion Online
Battery TypeMaintenance-free sealed Lead-Acid battery with suspended electrolyte,leakproof
Storage Temperature-15 to 45 Degree C
Operating Temperature0 - 40 Degree C
ColorBlack
Output power capacity3.5 KWatts / 5.0 kVA
Waveform typeSine wave
Output ConnectionsIEC Jumpers (Battery Backup),IEC 320 C13 (Battery Backup),IEC 320 C19 (Battery Backup)
BypassInternal Bypass (Automatic and Manual)
Nominal Input Voltage230 V
Input frequency50/60 Hz +/- 5 Hz (auto sensing)
Input ConnectionsHard Wire 3-wire
Input voltage range for main operations160 - 280 V
Input voltage adjustable range for mains operation100 - 280 V (half load)
Input Efficiency at Full Load92.0 %
Other Input Voltages220 V,240 V
Max Configurable Power3.5 KWatts / 5.0 kVA
Included Battery Modules2
Typical recharge time2.5 Hour(s)
Expected Battery Life3 - 5 Years
RBC Quantity1
Extendable Run Time1
Surge energy rating555 Joules
Rack Height3U
Nominal Output Voltage230 V
Net Weight54.55 kg
Shipping weight63.64 kg
Shipping Height347 mm,34.7 cm
Units per Pallet6.0
Operating Relative Humidity0 - 95% non-condensing %
Operating Elevation0-3000 meters
Storage Relative Humidity0 - 95% non-condensing %
Output Voltage NoteConfigurable for 220,230 or 240 nominal output voltage
Audible noise from surface of unit1 meter 55.0 dBA
Online thermal dissipation1057.0 BTU/hr
Protection ClassIP 20
ApprovalsC-tick,CE,EN 50091-1,EN 50091-2,EN 55022 Class A,EN 60950,EN 61000-3-2,GOST,VDE
Standard warranty2 years repair or replace
RoHSCompliant
Interface PortsRJ-45 10/100 Base-T,RJ-45 Serial,Smart-Slot
Efficiency at Full Load92.0 %
Output Voltage DistortionLess than 3%
Output Frequency sync to mains50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages220 V,240 V

Features :
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Scalable runtime: Allows additional run time to be quickly added as needed.
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • LED status indicators: Quickly understand unit and power status with visual indicators.
  • Smartslot: Customize UPS capabilities with management cards.
  • Serial connectivity: Provides management of the UPS via a serial port.
  • InfraStruXure Manager Compatible: Enables centralized management via the APC InfraStruXure Manager.
  • Network manageable: Provides remote power management of the UPS over the network.
  • Flash upgradeable firmware: Install maintenance releases of firmware remotely using FTP.
  • Rack/Tower convertible: Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
  • Plug-and-Play external batteries: Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
  • Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Avoids costly power problems by keeping your IT equipment and data protected and available: Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation, and zero transfer time to battery during power events.
  • Low operating and maintenance costs with proven reliability and intelligent battery management: Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self-tests insures battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
  • Save time with easy and convenient remote/network accessibility: Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.

View Complete Details

Yes, I am interested!

  • APC SRC1KUXI 230V Smart UPS Online
  • APC SRC1KUXI 230V Smart UPS Online
  • APC SRC1KUXI 230V Smart UPS Online
  • APC SRC1KUXI 230V Smart UPS Online
APC SRC1KUXI 230V Smart UPS Online
Interested in this product?
Get Best Quote
Load Crest Factor3 1
Maximum Depth400 mm,40.0 cm
Maximum Height220 mm,22.0 cm
Maximum Width145 mm,14.5 cm
Shipping Depth478mm,47.8 cm
Shipping Width235mm,23.5 cm
Storage Elevation0-4500 meters
TopologyDouble Conversion Online
Battery TypeNo internal battery - uses external battery system
Storage Temperature-20 to 60 Degree C
Operating Temperature0 - 40 Degree C
BrandAPC By Schneider
ColorBlack
Output power capacity800 Watts / 1.0 kVA
Nominal Input Voltage230 V
Input frequency40 - 70 Hz
Input ConnectionsIndia 3-pin 6A
Cord Length1.52 meters
Input voltage range for main operations110 - 280 V (half load)
Number of Power Cords1
Input Efficiency at Full Load90.0 %
Max Configurable Power800 Watts / 1.0 kVA
Net Weight5.7 kg
Shipping weight6.3 kg
Shipping Height340mm,34.0 cm
Pallet Weight877.44 lbs
Units per Pallet60.0
Operating Relative Humidity0 - 95 %
Operating Elevation0-900 meters
Storage Relative Humidity0 - 95 %
Nominal Output Voltage230 V
Standard warranty2 years repair or replace
Interface PortsDB-9 RS-232,Smart-Slot
Efficiency at Full Load90.0 %
Output Voltage DistortionLess than 2%
Output Frequency sync to mains50/60 Hz +/- 3 Hz
Other Output Voltages220 V,240 V
Waveform typeSine wave

Features:
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Excellent footprint: Small UPS footprint provides maximum usage of valuable electrical room floorspace
  • Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Generator compatibility: Allows you to recharge your battery while on generator power.
  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Intelligent Battery Charging: Microprocessor controlled, 3-stage regulated charging ensures the fastest recharge times without decreasing battery life.
  • LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
  • Serial connectivity: Provides management of the UPS via a serial port.
  • Sine wave output: Eliminates humming and heat generated when powering tube lights and fans.
  • SmartSlot: Customize UPS capabilities with management cards.
  • Wide input voltage range: Designed for harsh electrical environments to save battery life.

Availability:
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Scalable runtime: Allows additional run time to be quickly added as needed.

Marketing Features:
  • Save time with easy and convenient remote/network accessibility: Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
  • Low operating and maintenance costs with proven reliability and intelligent battery management: Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self-tests insures battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
  • Peace of mind that comes with full equipment compatibility and reliability of a leader: Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
  • Avoids costly power problems by keeping your IT equipment and data protected and available: Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation, and zero transfer time to battery during power events.

View Complete Details

Yes, I am interested!

  • APC SRC2KUXI 230V Smart UPS Online
  • APC SRC2KUXI 230V Smart UPS Online
  • APC SRC2KUXI 230V Smart UPS Online
  • APC SRC2KUXI 230V Smart UPS Online
APC SRC2KUXI 230V Smart UPS Online
Interested in this product?
Get Best Quote
BrandAPC By Schneider
Battery TypeNo internal battery - uses external battery system
ColorCharcoal
Transfer Time4 ms typical
TopologyDouble Conversion Online
Output power capacity1.6 KWatts / 2.0 kVA
Max Configurable Power1.6 KWatts / 2.0 kVA
Nominal Output Voltage230 V
Output Voltage NoteConfigurable for 220 230 or 240 nominal output voltage
Efficiency at Full Load92.0 %
Output Frequency sync to mains50/60Hz +/- 3 Hz
Output Frequency not synced60Hz +/- 0.1% for 60Hz nominal,50Hz +/- 0.1% for 50Hz nominal
Other Output Voltages220 V,240 V
Load Crest Factor3 1
Waveform typeSine wave
Output ConnectionsIEC 320 C13 (Battery Backup),Hard Wire 3-wire (H N + G) (Battery Backup)
Output Voltage THDLess Than 3% linear load
BypassBuilt-in Bypass
Nominal Input Voltage230 V
Input frequency40 - 70 Hz
Input ConnectionsHard Wire 3 wire (1PH+N+G)
Input voltage range for main operations140 - 280 V
Number of Power Cords1
Extendable Run Time1
Replacement battery cartridge note72V SMF or Flooded battery compatible internal charger 2A - 13A programmable
Maximum Height85 mm,8.5 cm
Maximum Width432 mm,43.2 cm
Maximum Depth483 mm,48.3 cm
Net Weight10.5 kg
Shipping weight13.5 kg
Shipping Height265 mm,26.5 cm
Shipping Width575 mm,57.5 cm
Shipping Depth585 mm,58.5 cm
Standard warranty2 years repair or replace
Control PanelMulti-function LCD status and control console
Audible AlarmAlarm when on battery distinctive low battery alarm

Marketing Features:
  • Save time with easy and convenient remote/network accessibility: Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
  • Low operating and maintenance costs with proven reliability and intelligent battery management: Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self-tests insures battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
  • Peace of mind that comes with full equipment compatibility and reliability of a leader: Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
  • Avoids costly power problems by keeping your IT equipment and data protected and available: Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation, and zero transfer time to battery during power events.

Protection:
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.

Serviceability:
  • Predicitive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Adaptability:
  • Plug-and-Play external batteries: Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
  • Rack/Tower convertible: Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
  • Flash upgradeable firmware: Install maintenance releases of firmware remotely using FTP.

Manageability:
  • Serial connectivity: Provides management of the UPS via a serial port.
  • InfraStruXure Manager Compatible: Enables centralized management via the APC InfraStruXure Manager.
  • Network manageable: Provides remote power management of the UPS over the network.
  • SmartSlot: Customize UPS capabilities with management cards.
  • LED status indicators: Quickly understand unit and power status with visual indicators.

View Complete Details

Yes, I am interested!

  • APC SRC3KUXI 230V Smart UPS Online
  • APC SRC3KUXI 230V Smart UPS Online
  • APC SRC3KUXI 230V Smart UPS Online
  • APC SRC3KUXI 230V Smart UPS Online
APC SRC3KUXI 230V Smart UPS Online
Interested in this product?
Get Best Quote
BrandAPC By Schneider
Operating Temperature0 - 40 Degree C
Battery TypeNo internal battery - uses external battery system
Storage Temperature0 - 45 Degree C
Transfer Time4 ms typical
Emergency Power OffYes
TopologyDouble Conversion Online
Output power capacity2.4 KWatts / 3.0 kVA
Max Configurable Power2.4 KWatts / 3.0 kVA
Nominal Output Voltage230 V
Output Voltage NoteConfigurable for 220 230 or 240 nominal output voltage
Efficiency at Full Load93.0 %
Output Frequency sync to mains50/60 Hz +/- 3 Hz
Output Frequency not synced60 Hz +/- 0.1% for 60Hz nominal, 50Hz +/- 0.1% for 50Hz nominal
Other Output Voltages220 V, 240 V
Load Crest Factor3 1
Waveform typeSine wave
Output ConnectionsHard Wire 3-wire (H N + G) (Battery Backup), IEC 320 C13 (Battery Backup)
Output Voltage THDLess Than 3% linear load
BypassBuilt-in Bypass
Nominal Input Voltage230 V
Input frequency40 - 70 Hz
Input ConnectionsHard Wire 3 wire (1PH+N+G)
Input voltage range for main operations140 - 280 V
Available SmartSlot Interface Quantity1
Maximum Height432 mm, 43.2 cm
Maximum Width85 mm, 8.5 cm
Maximum Depth483 mm, 48.3 cm
Net Weight11.5 kg
Shipping weight14.5 kg
Shipping Height575 mm, 57.5 cm
Shipping Width265 mm, 26.5 cm
Shipping Depth585 mm, 58.5 cm
Operating Relative Humidity0 - 95 %
Operating Elevation0-3000 meters
Storage Relative Humidity0 - 95 %
Storage Elevation0-4500 meters
Audible noise from surface of unit1 meter 55.0 dBA
Standard warranty2 years repair or replace
Replacement Battery Cartridge Note72V, SMF or Flooded battery compatible, internal charger 2A - 13A programmable
Control PanelMulti-function LCD status and control console
Audible AlarmAudible and visible alarms prioritized by severity

Features:
  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Scalable runtime: Allows additional run time to be quickly added as needed.
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • LED status indicators: Quickly understand unit and power status with visual indicators.
  • SmartSlot: Customize UPS capabilities with management cards.
  • Serial connectivity: Provides management of the UPS via a serial port.
  • InfraStruXure Manager Compatible: Enables centralized management via the APC InfraStruXure Manager.
  • Network manageable: Provides remote power management of the UPS over the network
  • Flash upgradeable firmware: Install maintenance releases of firmware remotely using FTP.
  • Rack/Tower convertible: Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
  • Plug-and-Play external batteries: Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

View Complete Details

Yes, I am interested!

  • APC SRC5KUXI 230V Smart UPS Online
  • APC SRC5KUXI 230V Smart UPS Online
  • APC SRC5KUXI 230V Smart UPS Online
  • APC SRC5KUXI 230V Smart UPS Online
APC SRC5KUXI 230V Smart UPS Online
Interested in this product?
Get Best Quote
BrandAPC By Schneider
Maximum Depth706 mm, 70.6 cm
Maximum Height432 mm, 43.2 cm
Maximum Width135 mm, 13.5 cm
Shipping Depth790 mm, 79.0 cm
Shipping Width275 mm, 27.5 cm
Storage Elevation0-3000 meters
TopologyDouble Conversion Online
Battery TypeNo internal battery - uses external battery system
Storage Temperature-10 to 40 Degree C
Operating Temperature0 - 40 Degree C
Emergency Power OffYes
Output power capacity4.5 KWatts / 5.0 kVA
Net Weight18.75 kg
Shipping weight23.5 kg
Shipping Height570 mm, 57.0 cm
Operating Relative Humidity0 - 95 %
Operating Elevation0-900 meters
Storage Relative Humidity0 - 95 %
Audible Noise From Surface of Unit1 Meter 55.0 dBA
Nominal Output Voltage230 V
Standard warranty2 years repair or replace
Control PanelControl panel Multi-function LCD status and control console
BypassBuilt-in Static Bypass
Output Voltage NoteConfigurable for 220 230 or 240 nominal output voltage
Efficiency at Full Load94.0 %
Output Voltage DistortionLess than 5%
Other Output Voltages220 V, 240 V
Waveform typeSine wave
Output ConnectionsHard Wire 3-wire (H N + G) (Battery Backup)
Nominal Input Voltage230 V
Input frequency40 - 70 Hz (auto sensing)
Input ConnectionsHard Wire 3-wire
Input voltage range for main operations160 - 285 V
Input Efficiency at Full Load94.0 %
Surge energy rating480 Joules
Max Configurable Power4.5 KWatts / 5.0 kVA

Features :
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Scalable runtime: Allows additional run time to be quickly added as needed.
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • LED status indicators: Quickly understand unit and power status with visual indicators.
  • SmartSlot: Customize UPS capabilities with management cards.
  • Serial connectivity: Provides management of the UPS via a serial port.
  • Infra Stru Xure Manager Compatible: Enables centralized management via the APC Infra Stru Xure Manager.
  • Network manageable: Provides remote power management of the UPS over the network.

View Complete Details

Yes, I am interested!

  • APC SRCE6KUXI 230V Smart UPS Online
  • APC SRCE6KUXI 230V Smart UPS Online
  • APC SRCE6KUXI 230V Smart UPS Online
  • APC SRCE6KUXI 230V Smart UPS Online
APC SRCE6KUXI 230V Smart UPS Online
Interested in this product?
Get Best Quote
BrandAPC By Schneider
Operating Temperature0 - 40 Degree C
Battery TypeNo internal battery - uses external battery system
Storage Temperature-15 to 65 Degree C
Emergency Power OffYes
TopologyDouble Conversion Online
Output power capacity5.4 KWatts / 6.0 kVA
Max Configurable Power5.4 KWatts / 6.0 kVA
Nominal Output Voltage230 V
Output Voltage NoteConfigurable for 220 230 or 240 nominal output voltage
Output Voltage DistortionLess than 5%
Other Output Voltages220 V, 240 V
Waveform typeSine wave
Output ConnectionsHard Wire 3-wire (H N + G) (Battery Backup)
BypassBuilt-in Static Bypass
Nominal Input Voltage230 V
Input frequency40 - 70 Hz
Input ConnectionsHard Wire 3-wire
Input voltage range for main operations160 - 285 V
Surge energy rating480 Joules
Maximum Height476 mm, 47.6 cm
Maximum Width135 mm, 13.5 cm
Maximum Depth706 mm, 70.6 cm
Net Weight18.71 kg
Shipping weight23.45 kg
Shipping Height570 mm, 57.0 cm
Shipping Width275 mm, 27.5 cm
Shipping Depth790 mm, 79.0 cm
Operating Relative Humidity0 - 95 %
Operating Elevation0-900 meters
Storage Relative Humidity0 - 95 %
Storage Elevation0-3000 meters
Audible Noise From Surface of Unit1 Meter 55.0 dBA
Standard warranty2 years repair or replace
Control PanelMulti-function LCD status and control console
Audible Alarm Audible and visible alarms configurable delays
Available SmartSlot Interface Quantity1

Features :
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power

  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Scalable runtime: Allows additional run time to be quickly added as needed.
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • LED status indicators: Quickly understand unit and power status with visual indicators.
  • SmartSlot: Customize UPS capabilities with management cards.
  • Serial connectivity: Provides management of the UPS via a serial port.
  • InfraStruXure Manager Compatible: Enables centralized management via the APC InfraStruXure Manager.
  • Network manageable: Provides remote power management of the UPS over the network.
  • Filtering: Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449

View Complete Details

Yes, I am interested!

  • APC SRC10KUXI 230V Smart UPS Online
  • APC SRC10KUXI 230V Smart UPS Online
  • APC SRC10KUXI 230V Smart UPS Online
  • APC SRC10KUXI 230V Smart UPS Online
APC SRC10KUXI 230V Smart UPS Online
Interested in this product?
Get Best Quote
BrandAPC By Schneider
Operating Temperature0 - 40 Degree C
Battery TypeNo internal battery - uses external battery system
Storage Temperature-10 to 60 Degree C
Emergency Power OffYes
Output power capacity9.0 KWatts / 10.0 kVA
Max Configurable Power9.0 KWatts / 10.0 kVA
Nominal Output Voltage230 V
Efficiency at Full Load94.4 %
Output Frequency sync to mains47 - 53 Hz for 50 Hz nominal, 50/60 Hz +/-1 Hz, 50/60 Hz +/- 3 Hz
Output Frequency not synced60 Hz +/- 0.1% for 60 Hz nominal, 50 Hz +/- 0.1% for 50 Hz nominal
Other Output Voltages220 V, 240 V
Load Crest Factor3 1
Waveform typeSine wave
Overload Operation60 seconds @ 125% and 30 seconds @ 150%
Output ConnectionsHard Wire 3-wire (H N + G) (Battery Backup)
Output Voltage THDLess Than 2% for 0 to 100% linear load and Less Than 5% for full non linear load
Output Voltage Tolerance+/-1% static and +/- 5% at 100% load step
BypassBuilt-in Static Bypass
Nominal Input Voltage230 V
Input frequency40 - 70 Hz (auto sensing)
Input ConnectionsHard Wire 3 wire (1PH+N+G), Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations160 - 285 V
Input voltage adjustable range for mains operation100 - 280 V
Input Power Factor at Full Load0.98
Typical recharge time5 Hour(s)
Interface PortsRJ-45 Serial, USB
Available SmartSlot Interface Quantity1
Maximum Height433 mm, 43.3 cm
Maximum Width134 mm, 13.4 cm
Maximum Depth706 mm, 70.6 cm
Net Weight27.5 kg
Shipping weight32.0 kg
Shipping Height570 mm, 57.0 cm
Shipping Width275 mm, 27.5 cm
Shipping Depth790 mm, 79.0 cm
Operating Relative Humidity0 - 95% non-condensing
Operating Elevation0-3000 meters
Storage Relative Humidity0 - 95% non-condensing
Storage Elevation0-15000 meters
Audible Noise From Surface of Unit1 meter 58.0 dBA
Protection ClassIP 20
Standard warranty2 years repair or replace
RoHSCompliant
REACHContains No SVHCs
Extended Run OptionsAPC-Smart-UPS-RC-10000VA-230V-for-India-No-Batteries

Features:
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Scalable runtime: Allows additional run time to be quickly added as needed.

Marketing Features:
  • Save time with easy and convenient remote/network accessibility: Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
  • Low operating and maintenance costs with proven reliability and intelligent battery management: Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self-tests insures battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
  • Peace of mind that comes with full equipment compatibility and reliability of a leader: Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
  • Avoids costly power problems by keeping your IT equipment and data protected and available: Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation, and zero transfer time to battery during power events.

Protection
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.

Serviceability
  • Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.

View Complete Details

Yes, I am interested!

  • APC SRC3000XLI-CC 230V Smart UPS Online
  • APC SRC3000XLI-CC 230V Smart UPS Online
  • APC SRC3000XLI-CC 230V Smart UPS Online
APC SRC3000XLI-CC 230V Smart UPS Online
Interested in this product?
Get Best Quote
Load Crest Factor3 1
Maximum Depth457 mm, 45.7 cm
Maximum Height175 mm, 17.5 cm
Maximum Width432 mm, 43.2 cm
Shipping Depth597 mm, 59.7 cm
Shipping Width622 mm , 62.2 cm
Storage Elevation0-15000 meters
TopologyDouble Conversion Online
Battery TypeMaintenance-free sealed Lead-Acid battery with suspended electrolyte leakproof
Storage Temperature-20 - 50 Degree C
Operating Temperature0 - 40 Degree C
Emergency Power OffYes
ColorBlack
Output power capacity2.1 KWatts / 3.0 kVA
Interface PortsDB-9 RS-232, SmartSlot
Available SmartSlot Interface Quantity1
Waveform typeSine wave
Surge energy rating420 Joules
Nominal Output Voltage230 V
Rack Height4U
Net Weight34.0 kg
Shipping weight37.7 kg
Shipping Height337 mm, 33.7 cm
Units per Pallet12.0
Input voltage adjustable range for mains operation100 - 280 V
Operating Relative Humidity0 - 95 %
Operating Elevation0-3000 meters
Output Voltage NoteConfigurable for 220 230 or 240 nominal output voltage
Output ConnectionsIEC 320 C13 (Battery Backup), Hard Wire 3-wire (H N + G) (Battery Backup)
Storage Relative Humidity0 - 95 %
Audible noise from surface of unit1 meter 55.0 dBA
Online thermal dissipation652.0 BTU/hr
ApprovalsEN 60950, EN/IEC 62040-2
Standard warranty2 years repair or replace,optional on-site warranties available,optional extended warranties availab
RoHSCompliant
Other Input Voltages220 V, 240 V
Replacement BatteryAPCRBC120
Audible AlarmAlarm when on battery, distinctive low battery alarm, overload continuous tone alarm
Efficiency at Full Load90.0 %
BypassBuilt-in Bypass
Data Line ProtectionRJ-45 Modem/Fax protection (four wire dual line)
Output Voltage DistortionLess than 3%
Output Frequency sync to mains50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages220 V, 240 V
Nominal Input Voltage230 V
Max Configurable Power2.1 KWatts / 3.0 kVA
Input frequency50/60 Hz +/- 5 Hz (auto sensing)
Input ConnectionsIEC-320 C20
Cord Length2.44 meters
Input voltage range for main operations160 - 280 V
Included Battery Modules1
Typical recharge time3 Hour(s)
Battery Slots Empty1
Expected Battery Life3 - 5 Years
Extendable Run Time1

Availability:
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Scalable runtime: Allows additional run time to be quickly added as needed.

Marketing Features:
  • Save time with easy and convenient remote/network accessibility: Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
  • Low operating and maintenance costs with proven reliability and intelligent battery management: Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self-tests insures battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
  • Peace of mind that comes with full equipment compatibility and reliability of a leader: Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
  • Avoids costly power problems by keeping your IT equipment and data protected and available: Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation, and zero transfer time to battery during power events.

Protection:
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.

 

Adaptability

  • Plug-and-Play external batteries: Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
  • Rack/Tower convertible: Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
  • Flash upgradeable firmware: Install maintenance releases of firmware remotely using FTP.

View Complete Details

Yes, I am interested!

  • APC SRC2000XLI-CC 230V Smart UPS Online
  • APC SRC2000XLI-CC 230V Smart UPS Online
  • APC SRC2000XLI-CC 230V Smart UPS Online
APC SRC2000XLI-CC 230V Smart UPS Online
Interested in this product?
Get Best Quote
Load Crest Factor3 1
Maximum Depth457 mm, 45.7 cm
Maximum Height175 mm, 17.5 cm
Maximum Width432 mm, 43.2 cm
Shipping Depth597 mm, 59.7 cm
Shipping Width622 mm, 62.2 cm
Storage Elevation0-15000 meters
TopologyDouble Conversion Online
Battery TypeMaintenance-free sealed Lead-Acid battery with suspended electrolyte leakproof
Storage Temperature-20 to 50 Degree C
Operating Temperature0 - 40 Degree C
ColorBlack
Interface PortsDB-9 RS-232, SmartSlot
Shipping Height337 mm, 33.7 cm
Output ConnectionsHard Wire 3-wire (H N + G) (Battery Backup) , IEC 320 C13 (Battery Backup)
Units per Pallet12.0
Operating Relative Humidity0 - 95 %
Nominal Output Voltage230 V
Operating Elevation0-3000 meters
Storage Relative Humidity0 - 95 %
Output power capacity1.4 KWatts / 2.0 kVA
Audible noise from surface of unit1 meter 55.0 dBA
Online thermal dissipation652.0 BTU/hr
Available SmartSlot Interface Quantity1
ApprovalsEN 60950, EN/IEC 62040-2
BypassBuilt-in Bypass
Standard warranty2 years repair or replace,optional on-site warranties available,optional extended warranties availab
RoHSCompliant
Output Voltage NoteConfigurable for 220 230 or 240 nominal output voltage
Efficiency at Full Load89.0 %
Output Voltage DistortionLess than 3%
Other Input Voltages220 V, 240 V
Output Frequency sync to mains50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages220 V, 240 V
Waveform typeSine wave
Nominal Input Voltage230 V
Input frequencyInput frequency 50/60 Hz +/- 5 Hz (auto sensing)
Input ConnectionsIEC-320 C20
Cord Length2.44 meters
Input voltage range for main operations160 - 280 V
Replacement BatteryAPCRBC121
Extended Run OptionsAPC-Smart-UPS-RC-2000VA-230V-Harsh-Environment
Included Battery Modules1
Typical recharge time3 Hour(s)
Battery Slots Empty1
Surge energy rating420 Joules
Expected Battery Life3 - 5 Years
Extendable Run Time1
Max Configurable Power1.4 KWatts / 2.0 kVA
Rack Height4U
Net Weight26.2 kg
Input voltage adjustable range for mains operation100 - 280 V
Shipping weight29.9 kg

Availability
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Scalable runtime: Allows additional run time to be quickly added as needed.

Marketing Features:
  • Save time with easy and convenient remote/network accessibility: Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
  • Low operating and maintenance costs with proven reliability and intelligent battery management: Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self-tests insures battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
  • Peace of mind that comes with full equipment compatibility and reliability of a leader: Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
  • Avoids costly power problems by keeping your IT equipment and data protected and available: Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation, and zero transfer time to battery during power events.

Protection:
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.

Serviceability:
  • Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.

View Complete Details

Yes, I am interested!

  • APC SURT6000XLI-CC 230V Smart UPS Online
  • APC SURT6000XLI-CC 230V Smart UPS Online
APC SURT6000XLI-CC 230V Smart UPS Online
Interested in this product?
Get Best Quote
BrandAPC By Schneider
Load Crest Factor3 1
Maximum Depth660 mm, 66.0 cm
Maximum Height432 mm, 43.2 cm
Maximum Width130 mm, 13.0 cm
Shipping Depth980 mm, 98.0 cm
Shipping Width603 mm, 60.3 cm
Storage Elevation0-15000 meters
TopologyDouble Conversion Online
Battery TypeMaintenance-free sealed Lead-Acid battery with suspended electrolyte leakproof
Storage Temperature-15 to 45 Degree C
Operating Temperature0 - 40 Degree C
ColorBlack
Emergency Power OffYes
Output power capacity4.2 KWatts / 6.0 kVA
Waveform typeSine wave
Output ConnectionsIEC 320 C13 (Battery Backup), IEC 320 C19 (Battery Backup), IEC Jumpers (Battery Backup)
BypassInternal Bypass (Automatic and Manual)
Nominal Input Voltage230 V
Input frequency50/60 Hz +/- 5 Hz (auto sensing)
Input ConnectionsHard Wire 3-wire
Input voltage range for main operations160 - 280 V
Input voltage adjustable range for mains operation100 - 280 V
Other Input Voltages220 V, 240 V
Included Battery Modules2
Max Configurable Power4.2 KWatts / 6.0 kVA
Typical recharge time2.5 Hour(s)
Expected Battery Life3 - 5 Years
RBC Quantity1
Extendable Run Time1
Surge energy rating555 Joules
Rack Height3U
Net Weight54.55 kg
Nominal Output Voltage230 V
Shipping weight63.64 kg
Shipping Height347 mm, 34.7 cm
Units per Pallet6.0
Operating Relative Humidity0 - 95% non-condensing %
Operating Elevation0-3000 meters
Storage Relative Humidity0 - 95% non-condensing %
Audible noise from surface of unit1 meter 55.0 dBA
Output Voltage NoteConfigurable for 220 230 or 240 nominal output voltage
Online thermal dissipation1221.0 BTU/hr
Protection ClassIP 20
ApprovalsC-tick, CE, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, EN 61000-3-2, GOST, VDE
Standard warranty2 years repair or replace,optional on-site warranties available,optional extended warranties availab
RoHSCompliant
REACHContains No SVHCs
Battery DirectiveCompliant
Other Environmental ComplianceChina RoHS
Interface PortsDB-9 RS-232, RJ-45 10/100 Base-T, Smart-Slot
Audible AlarmAlarm when on battery distinctive low battery alarm overload continuous tone alarm
Efficiency at Full Load92.0 %
Output Voltage DistortionLess than 3%
Output Frequency sync to mains50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages220 V, 240 V

Features:
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Scalable runtime: Allows additional run time to be quickly added as needed.
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • LED status indicators: Quickly understand unit and power status with visual indicators.
  • SmartSlot: Customize UPS capabilities with management cards.
  • Serial connectivity: Provides management of the UPS via a serial port.
  • InfraStruXure Manager Compatible: Enables centralized management via the APC InfraStruXure Manager.
  • Network manageable: Provides remote power management of the UPS over the network.
  • Flash upgradeable firmware: Install maintenance releases of firmware remotely using FTP.
  • Rack/Tower convertible: Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
  • Plug-and-Play external batteries: Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
  • Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
  • Audible alarms: Provides notification of changing utility power and UPS power conditions, Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm
  • Disconnected battery Notification: Warns when a battery is not available to provide backup power.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.
  • Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Approvals: C-tick, CE, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, EN 61000-3-2, GOST, VDE
  • Filtering: Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
  • Control panel: LED status display with load and battery bar-graphs and On Line: On Battery: Replace Battery: Overload and Bypass Indicators

View Complete Details

Yes, I am interested!

APC SURT15KUXI-IN 230V Smart UPS Online
Interested in this product?
Get Best Quote
BrandAPC By Schneider
Load Crest Factor3 1
Maximum Depth773 mm, 77.3 cm
Maximum Height263 mm, 26.3 cm
Maximum Width432 mm, 43.2 cm
Shipping Depth1003 mm, 100.3 cm
Shipping Width610 mm, 61.0 cm
Storage Elevation0-15000 meters
TopologyDouble Conversion Online
Battery TypeNo internal battery - uses external battery system
Storage Temperature-15 to 45 Degree C
Operating Temperature0 - 40 Degree C
Output power capacity12.0 KWatts / 15.0 kVA
BypassBuilt-in Static Bypass, Internal Bypass (Automatic and Manual)
Nominal Input Voltage230 V
Input frequency50/60 Hz +/- 5 Hz (auto sensing)
Input ConnectionsHard Wire 3 wire (1PH+N+G), Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations160 - 280 V
Input Efficiency at Full Load94.0 %
Input Total Harmonic DistortionLess than 5% for full load
Other Input Voltages220 V, 240 V, 400 V
Maximum Input Current90.0 A
Input Power Factor at Full Load0.98
Max Configurable Power12.0 KWatts / 15.0 kVA
Rack Height6U
Net Weight68.0 kg
Shipping weight90.5 kg
Shipping Height622 mm, 62.2 cm
Operating Relative Humidity0 - 95% non-condensing
Nominal Output Voltage230 V
Operating Elevation0-3000 meters
Storage Relative Humidity0 - 95% non-condensing
Audible noise from surface of unit1 meter 50.0 dBA
Online thermal dissipation2216.0 BTU/hr
Protection ClassIP 20
Standard warranty2 years repair or replace
RoHSCompliant
REACHContains No SVHCs
Interface PortsDB-9 RS-232, RJ-45 10/100 Base-T, Smart-Slot
Efficiency at Full Load94.0 %
Pre Installed SmartSlot CardsAP9631
Control PanelControl panel Multi-function LCD status and control console
Output Voltage DistortionLess than 3%
Output Frequency sync to mains50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages220 V, 240 V, 400 V, 415 V
Waveform typeSine wave

APC Smart-UPS RT 15kVA 230V No Batteries, India Specific

Dual mains input: Increases availability by allowing the UPS to be connected to two separate power sources.
LCD display: Alpha-Numeric Display which displays system parameters and alarms.
Removable input/output wiring tray: Allows quick and easy installation and maintenance of the UPS.
Single or three-phase input wireable: Provides flexibility for the UPS to be installed using either single or three-phase input wiring.

View Complete Details

Yes, I am interested!

APC SURT20KUXI-IN 230V Smart UPS Online
Interested in this product?
Get Best Quote
Shipping Width610 mm, 61.0 cm
Shipping Depth1003 mm, 100.3 cm
Operating Relative Humidity0 - 95% non-condensing %
Operating Elevation0-3000 meters
Shipping Height622 mm, 62.2 cm
Output power capacity16.0 KWatts / 20.0 kVA
Maximum Depth773 mm, 77.3 cm
Rack Height6U
Net Weight68.0 kg
Storage Relative Humidity0 - 95% non-condensing %
Storage Elevation0-15000 meters
REACHContains No SVHCs
Pre Installed SmartSlot CardsAP9631
Control PanelMulti-function LCD status and control console
Emergency Power OffYes
RoHSCompliant
Standard warranty2 years repair or replace
Audible noise from surface of unit1 meter 59.0 dBA
Online thermal dissipation2216.0 BTU/hr
Protection ClassIP 20
Maximum Width432 mm, 43.2 cm
Shipping weight90.5 kg
Maximum Height263 mm , 26.3 cm
Other Output Voltages220 V, 240 V, 400 V, 415 V
Load Crest Factor3 1
Output ConnectionsHard Wire 3-wire (H N + G) (Battery Backup),IEC 320 C19 (Battery Backup),IEC 320 C13 (Battery Backup
Output Voltage DistortionLess than 3%
Efficiency at Full Load94.0 %
Max Configurable Power16.0 KWatts / 20.0 kVA
Nominal Output Voltage230 V
Output Voltage NoteConfigurable for 400 or 415V 3 Phase nominal output voltage
BypassBuilt-in Static Bypass, Internal Bypass (Automatic and Manual)
Output Frequency sync to mains50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Maximum Input Current115.0 A
Input Power Factor at Full Load0.98
Interface PortsDB-9 RS-232, RJ-45 10/100/1000 Base-T, Smart-Slot
Other Input Voltages220 V, 240 V, 400 V, 415 V
Input Efficiency at Full Load94.0 %
Input frequency40 - 70 Hz (auto sensing)
Input ConnectionsHard Wire 3-wire (3PH + G), Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations160 - 280 V
Nominal Input Voltage230 V

Features :
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.

  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Scalable runtime: Allows additional run time to be quickly added as needed.
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • LED status indicators: Quickly understand unit and power status with visual indicators.
  • SmartSlot: Customize UPS capabilities with management cards.
  • Serial connectivity: Provides management of the UPS via a serial port.
  • InfraStruXure Manager Compatible: Enables centralized management via the APC InfraStruXure Manager.
  • Network manageable: Provides remote power management of the UPS over the network.
  • Dual mains input: Increases availability by allowing the UPS to be connected to two separate power sources.
  • LCD display: Alpha-Numeric Display which displays system parameters and alarms.
  • Removable input/output wiring tray: Allows quick and easy installation and maintenance of the UPS.
  • Single or three-phase input wireable: Provides flexibility for the UPS to be installed using either single or three-phase input wiring.

View Complete Details

Yes, I am interested!
Tell us what you need, and we’ll help you get quotes
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Tell us what you need, and we’ll help you get quotes
terms privacy policy