X

Shellco (Regd.)

Sarai Kale Khan, New Delhi, Delhi

| GST  07ABRPR6748J1ZR

| TrustSEAL Verified

|

★★★★★
★★★★★
View Mobile Number 83% Response Rate

Construction Chemicals

Wholesale Trader of a wide range of products which include Shalitex Sealing Compound, RDL 940/941 Choksey Techseal, Seal n flex 1 bostik, Fosroc Conbextra GP2 Cementitious Grout, Liquid Fosroc Conplast WL and Nitoflor Hardtop STD.

Shalitex Sealing Compound
Interested in this product?
Get Best Quote

Shalitex Sealing Compound

Rs 235 / PieceGet Latest Price

Product Brochure

BrandShalitex
Packaging SizeAvailable in 20 kg and 200 kg drum
StorageKeep in cool and dry place, under shed, away from heat
ColorBlack
Flow Test5 %, max
Pour PointMax. 180 deg C
Softening PointMin. 85 deg C

ShaliTex® Sealing Compound is bitumen based sealant for concrete joints resistant to high temperature variations providing waterproof sealing for all type of horizontal joints. It is conforming to IS 1834 – 1984, Grade A specification.

Application:
  • Runway Joints
  • Joints in garages, filling stations and other places of construction joints like in warehouse floors and secondary containment of walls and floors of artificial water ponds.
  • Bridge / road joints.

Advantages:
  • Ability to withstand expansion without cracking
  • Good adhesion to concrete / other surface.
  • Low susceptibility to flow during hot weather condition.
  • Resistant to sunlight / rain and cyclic temperature changes.
  • Anti-corrosive and prevents root growth.
  • Resistant to ingress of foreign substance.

Application Methodology:
  • Remove dust, flakes, oil, grease or other foreign particles by jet or dry air and clean the surface to make it smooth before applying ShaliTex Sealing Compound.
  • Spray or brush, on the area where ShaliTex Sealing Compound is to be applied, ShaliTex Primer evenly throughout the joints and allow it to dry completely. 24 hours is enough to dry the primer during normal weather condition.
  • Cover the joint by plastic film if rain is expected after primer application.
  • Cut ShaliTex Sealing Compound drum and heat it to 180 – 210 OC while slowly stirring the material for uniformity. A 20 kg drum will take 2-3 hr at 190 – 200 OC for complete melting using hand stirrer. Do not overheat as this may cause frothing. If for any reason bubble appears during melting, keep the temperature around 180 OC for a longer time with slow manual stirring till the bubble disappears.
  • Upon primer drying completely, pour molten ShaliTex Sealing Compound from one side of the joint allowing it to travel through the joint as much as practicable. While pouring, ensure that temperature of material is in the range of 190 - 200 OC.
  • During the pouring process, to avoid spillage, place wooden boards on both sides of joint and pour from can with extended spout. 

View Complete Details

Yes, I am interested!

RDL 940/941 Choksey Techseal
  • RDL 940/941 Choksey Techseal
  • RDL 940/941 Choksey Techseal
Interested in this product?
Get Best Quote

RDL 940/941 Choksey Techseal

Rs 240 / KilogramGet Latest Price

Product Brochure

Packaging SizeTechseal-1 kg,4 kg,6.5 kg,Primer-250 ml,500 ml,1 liter
BrandChoksey
Shelf Life9 months
StorageStore the material at cool and dry place (at 25 deg C temp. & 50% RH)
ModelTechseal RDL 940/941

TECHSEAL RDL 940/941 are two component sealant based on ‘THIOKOL’ – Polysulphide liquid elastomer. It consists of a ‘base’ compound and ‘accelerator’ (Curing Agent). When the two components are mixed together prior to application, a chemical reaction is initiated which cures instantly to a firm, flexible rubber like seal with excellent adhesion to concrete, masonry, wood, glass, acrylic and PVC plastics. It is capable of withstanding repeated extension, compression & cyclic movements without the loss of adhesion and resists deterioration by weathering, sunlight, ozone, water, salt, oils and fuels. It is far superior to all the conventional joint sealing material like bitumen, mastics, metallic channels and expansion sheets. RDL-940 (Gun Grade) is a non-sag material used for sealing of horizontal, vertical & ceiling joints RDL-941 (Pour Grade) is a pourable & self leveling material used for sealing of horizontal joints only.

Features:
  • Cures at ambient temperatures to a tough, elastic and flexible rubber like material
  • Bonds strongly to most of the building materials with the use of recommended primers
  • Durable, remains unaffected by UV rays, ozone and weathering conditions
  • Resistant to water, salt water, 10% dil. acids except nitric acids, alkalis, most of the common chemicals, vegetable, lubricating oils and fuels
  • Performs well in a temperature ranging from –20???C to 80???C
  • Slip resistant (sag) can be applied in horizontal joints
  • Movement capability – Provides satisfactory hermetic sealing of the joint subjected to expansion, contraction, vibration and cyclic movement within the following limits. -Movement joints up to ± 25% of the width
  • Slip resistant (non-sag) can be applied in vertical & ceiling g joints
  • Self leveling, after pouring in horizontal joint levels itself
  • Resilient. Recovers the original width after expansion & contraction without loosing the surface bond
  • Excellent reparability property
  • It can be over coated by waterproofing compounds
  • Non-toxic
  • Sealant will not cause staining to concrete masonry or stones

Application:
  • Sealing of expansion, contraction & construction joints in building structures such as, basements, subways, retaining walls, floors, external walls and claddings of high-rise buildings, roof terraces & ceilings especially structural expansion joints running through the ceiling

View Complete Details

Yes, I am interested!

Seal n flex 1 bostik
Interested in this product?
Get Best Quote

Seal n flex 1 bostik

Rs 450 / PackGet Latest Price

BrandPU Sealant
Grade StandardIndustrial Grade
ColorGrey
Packaging Size720 grm
MaterialPu sealant
FeaturesMoisture Resistant, Vibration Resistant, Heat Resistant, Water Resistant, Impact Resistant

Seal n flex 1 bostik

View Complete Details

Yes, I am interested!

Fosroc Conbextra GP2 Cementitious Grout
Interested in this product?
Get Best Quote
Packaging TypePlastic Bag
BrandFosroc
GradeChemical
FormPowder
Packaging size25 Kg

Conbextra GP2(T) is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2(T) is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.

Uses:

  • Conbextra GP2(T) is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts. 

Advantages:
  • Gaseous expansion system compensates for shrinkage and settlement in the plastic state 
  • No metallic iron content to cause staining 
  • Pre-packed material overcomes onsite batching variations 
  • Develops high early strength without the use of chlorides 
  • High ultimate strength ensure the durability of the hardened grout 
  • Free flow ensures high level of contact with load bearing area 

View Complete Details

Yes, I am interested!

Liquid Fosroc Conplast WL
Interested in this product?
Get Best Quote

Liquid Fosroc Conplast WL

Rs 1,040 / PackGet Latest Price

Product Brochure

Packaging SizeAvailable 125ml, 1, 5 , 20 and 200 litre containers
Shelf Life12 months
BrandFosroc
ModelConplast WL
Standards ComplianceConplast WL conforms to IS2645-2003

Conplast WL is a dark brown liquid based on lignosulphonates which mixes readily with water and therefore disperses evenly. Conplast WL waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more efficient compared to traditional powder waterproofers as its use results in two fold improvement of concrete or mortar.

Uses:
  • To minimise permeability and increase the waterproofing properties of concrete and cement sand mortars for critical applications like roof slabs and screeds, basements, external plastering, bathroom floors, water tanks, sumps, drains etc. 

Advantages:
  • Liquid admixture: Instant and complete dispersion throughout the mix. Uniform waterproofing throughout concrete matrix. 
  • High efficiency: Dramatic reduction in permeability of concrete/ mortar 
  • Improved workability: Improves compaction of concrete and mortar, even where harsh sands or aggregates are used.
  • Improved concrete quality: Minimises porosity and honey combing. Produces dense homogenous concrete.

Precautions:
Health and Safety instructions:
  • Conplast WL is non-toxic. Any splashes on skin should be washed well with water. If contact with eyes occurs, it shall be washed well with plenty of water and medical advice sought immediately

View Complete Details

Yes, I am interested!

Nitoflor Hardtop STD
Interested in this product?
Get Best Quote

Nitoflor Hardtop STD

Rs 345 / BagGet Latest Price

Product Brochure

Packaging Size20 kg
Packaging TypeHDPE bags
Shelf Life12 months
BrandNitoflor

Nitoflor Hardtop / Nitoflor Hardtop Standard are quality controlled, factory blended powder which are ready to use on site. They contain special hardwearing aggregates which have been selected for abrasion and wear resistant properties as well as shape and size. These latter considerations, together with the use of high performance workability admixtures, produces a material which is easy to trowel into the surface of fresh, wet concrete. Nitoflor Hardtop / Nitoflor Hardtop Standard cure monolithically to provide a dense, non-porous surface which is extremely hardwearing and abrasion resistant. Monolithic cure ensures that problems normally associated with thin 'granolithic' screeds, viz., shrinkage, cracking, etc., are completely overcome. Being non-metallic, Nitoflor Hardtop / Nitoflor Hardtop Standard provide a non-slip surface which will never rust and disintegrate.

Uses:
  • Nitoflor Hardtop / Nitoflor Hardtop Standard provide a highly abrasion resistant surface to concrete floors by the dry shakeon method which ensures that the hardwearing surface bonds monolithically to the base concrete. They are ideally suited for all industrial areas subject to the heaviest traffic, e.g. loading bays, trucking lanes, car parks, workshops, machine shops, ramps and spillways. 

Advantages:
  • Non metallic - does not rust or stain. 
  • Provides a hard, abrasion resistant surface 
  • Forms monolithic bond with base concrete 
  • Easy and economical to apply

Limitations:
  • For concretes with optimised water cement ratios, Nitoflor Hardtop / Nitoflor Hardtop Standard shall not be broadcast in excess of 3 - 4 kg /m2 . For such applications, consult Fosroc. 
  • Nitoflor Hardtop / Nitoflor Hardtop Standard are not advised for broadcast over concrete in subzero temperatures, such as, floorings for cold storages etc.

View Complete Details

Yes, I am interested!

Polysulphide Sealants
Interested in this product?
Get Best Quote

Polysulphide Sealants

Rs 210 / KilogramGet Latest Price

Grade StandardAgriculture Grade, Chemical Grade
Packaging Size5 L
FeaturesMoisture Resistant, Vibration Resistant
BrandPolysulphide
Packaging TypeTin Can

Polysulphide Sealants

View Complete Details

Yes, I am interested!

STP Tarplastic
  • STP Tarplastic
  • STP Tarplastic
Interested in this product?
Get Best Quote

STP Tarplastic

Rs 1,620 / BarrelGet Latest Price

Product Brochure

BrandSTP
Packaging SizeAvailable in 1 kg, 4 kg, 20 kg and 200 kg container
ColorBlack
Setting Time72 hr(for 3 mm)
Specific Gravity1.2
StorageKeep in cool and dry place in air tight container under shed away from heat

TarPlastic® is a cold applied bituminous caulking compound with mineral fillers in a volatile solvent to retain its plasticity. It is available in a putty form. TarPlastic® remains plastic for a considerable length of time. The skin and interior harden to some extent after application. It conforms to the requirement of IS : 1580 – 1991.


Application:
  • It is ideal for use in situation where certain degree of expansion, contraction and vibration is expected, like around J Hooks used for fixing Asbestos / GI sheets. It can also be used for caulking various types of roofs and masonry walls, including
  • Fully plugging gaps in tiles caused by sagging of battens or otherwise in case of tiled roofs.
  • Filling minor cracks / gaps in terraced roofs or other locations.

Advantages:
  • Cold applied and ready to use. Does not require specialised handling for application.
  • Does not creep or flow when applied on vertical or sloping surfaces.
  • Remains plastic for a considerable time and, therefore, can accommodate a good degree of expansion, contraction and vibration.

Application Methodology:
  • In case of GI / Asbestos roof sheets, apply TarPlastic® into the overlapping joints with knife and spatula after cleaning rusted joints and applying a coat of ShaliTex®
  • To fix “J” Hooks for Asbestos or other roofing sheets, top of the holding bolts should be covered with TarPlastic® and a limpet washer fixed as cover.
  • Locate the cracks and then widen them to a V section, about 25 mm deep.
  • Brush out the loose particles from the crack and dust it clean.
  • Paint the cracks lightly with ShaliTex® Primer.
  • Press TarPlastic® into the painted crack by hand or with a trowel and finish overlapping the crack by at least 25 mm on either side.

 

Health & Safety:
  • Lid of the container should be firmly fixed, when not in use.
  • Inflammable and hence keep away from direct flame.
  • TarPlastic® shall have no harmful reaction, when it comes in contact with drinking water.
  • Clean hands  with warm soap water after application
  • Use goggles, hand gloves and trowel during application.

View Complete Details

Yes, I am interested!

Shali Bond
Interested in this product?
Get Best Quote

Shali Bond

Rs 1,620 / BarrelGet Latest Price

Product Brochure

BrandSTP
Packaging SizeAvailable in 1 kg, 4 kg, 20 kg and 180 kg drums.
StorageKeep in cool and dry place, in air tight container, under shed, away from heat.
ColorBlack
Viscosity15 - 20 sec (10 mm cups)
Drying Time24 hr
Specific Gravity0..95
Dry Film Thickness150 microns
Flash Point40 deg C

ShaliBond® BS / CS is a cold applied bituminous adhesive for fixing waterproofing membrane. It is manufactured from special grades of bitumen, suitably blended with other additives. It has semiliquid consistency and is ready to use.

Application:
  • Recommended for sticking roofing felts on metal, timber, tiles, asbestos, concrete and masonry surfaces, including roofs of trains, buses, tramcars, railway carriages, etc. 

Advantages:
  • ShaliBond BS/CS is cold applied adhesive and does not require any torching. Therefore, it is useful for applications where use of hot bitumen / torching is difficult or prohibited. 

Application Methodology:
  • Surfaces should be cleaned of all foreign materials and should be completely dry. 
  • Apply ShaliBond BS / CS over the cleaned surfaces with a spatula or brush. 
  • Allow approximately 10 minutes time before laying the felt and sticking the same by application of uniform mild pressure. 
  • For more effective waterproofing, seal overlaps and termination by affixing 6 inch flashings of the membrane on overlapping area after application of ShaliPrime APP. 

Health & Safety:
  • Lid of the container should be firmly fixed, when not in use. 
  • ShaliBond® BS / CS is inflammable and hence keep away from flame. 
  • Use goggles and hand gloves during application. 
  • Clean hands  with warm soap water after application 

View Complete Details

Yes, I am interested!

Fosroc Conplast SP430 Superplasticising Admixture
Interested in this product?
Get Best Quote
Packaging Size210 litre drum, 1000 litre totes or bulk
BrandFosroc
Model NumberConplast SP430
Shelf Life12 months
Specific Gravity1.18 @ 25 deg C
Freezing PointApproximately -2 deg C
AppearanceBrown liquid
Chloride ContentNil to BS 5075 / BSEN934

Conplast SP430 is a chloride free, superplasticising admixture based on selected sulphonated napthalene polymers. It is supplied as a brown solution which instantly disperses in water. Conplast SP430 disperses the fine particles in the concrete mix, enabling the water content of the concrete to perform more effectively. The very high levels of water reduction possible allow major increases in strength to be obtained. Where the main requirement is to provide high workability concrete, the mix design should be one suitable for use as a pump mix. Advice on mix design for flowing concrete is available from Fosroc.

Uses:

  • To provide excellent acceleration of strength gain at early ages and major increases in strength at all ages by significantly reducing water demand in a concrete mix. 
  • Particularly suitable for precast concrete and other high early strength requirements. 
  • To significantly improve the workability of site mixed and precast concrete without increasing water demand. 
  • To provide improved durability by increasing ultimate strengths and reducing concrete permeability. 

Advantages:
  • Major increases in strength at early ages without increased cement contents are of particular benefit in precast concrete, allowing earlier stripping times. 
  • Makes possible major reductions in water:cement ratio which allow the production of high strength concrete without excessive cement contents. 
  • Use in production of flowing concrete permits easier construction with quicker placing and compaction and reduced labour costs without increasing water content. 
  • Increased workability levels are maintained for longer than with ordinary sulphonated melamine admixtures. 
  • Improved cohesion and particle dispersion minimises segregation and bleeding and improves pumpability. 
  • Chloride free, safe for use in prestressed and reinforced concrete

View Complete Details

Yes, I am interested!

Roff T11 Roff Rainbow Tile Mate
Interested in this product?
Get Best Quote
BrandRoff
ColorAvailable in 22 pleasing Colors
Packaging SizeAvailable in 500 gm,1 Kg & 10 Kg packs
Model NumberT11
Shelf Life12 months from the date of manufacture if stored in original packin
StorageStore in damproof covered shade / godown

Roff rainbow tile mate is a polymer based cementitous tile joint filler used for in filling joints of all kind of tiles. It effectively fills the gaps and levels it self to give hard wearing, non-dusting, tile joints. Roff rainbow tile mate does not allow moisture / water to seep into the back of the tile and cause its dislocation. It firmly holds the tiles together to give a long life to the floor tiles. Roff rainbow tile mate is available in 22 pleasing colours to match the colour of tile (ask for shade card). Roff rainbowtile mate is recommended for filling joints upto 5 mm width depending on site condition.

primary use:
  • to provide smooth water-resistant hard wearing tile joints.

areas of application:
  • as a tile joint filler in floor and wall tiles, for internal & external applications like commercial establishments, laboratories, bakeries, super markets, showrooms, hospitals, parking lanes etc.

features & benefits:
  • high compressive, tensile & flexural strengths ensure carefree joints upto the life of the tile.
  • polymer based
  • waterproof
  • non-dusting
  • easy to use and clean

method of application:
  • add 2. 5 to 3 parts roff rainbow tile mate to one part of water by volume. Mix to a smooth consistency.
  • apply the paste to the tile joints with a sponge / squeeze trowel. Remove surplus roff rainbow tile mate with a damp sponge.
  • allow 24 hours for the filling to dry. Then polish the tile with a clean,dry cloth.
  • note : roff rainbow tile mate must be filled within 24 hours of fixing the tiles.

coverage:
  • depends on the size of the tile and width of the joint, for 3mm deep joints coverage is given in the utility

View Complete Details

Yes, I am interested!
© Shellco (Regd.). All Rights Reserved (Terms of Use)