Micro Controller
| Core Size | 16 Bit |
| Brand | Nuvoton |
| RAM Size | 1.25K x 8 |
| Package Type | DIP |
| Part Number | N78E517ADG |
| Mounting Type | Dip |
| Pin Count | 40 |
| Maximum Operating Supply Voltage | 2.4V ~ 5.5V |
8051 N78 Mi
| IC MCU 8BIT 64KB FLASH 40DIP |
Additional Information:
- Delivery Time: 1 week
View Complete Details
| Pin Count | 28 pin |
| Package Type | DIP |
| Device Core | PIC16 |
| ROM Type | Flash |
| Brand | Microchip |
| Voltage | 2.0-5.5 v |
| Part Number | PIC16F676-I/P |
| SRAM Memory | 64 bytes |
| EEPROM Memory | 128 bytes |
The PIC16F676-I/P is a 8-bit Flash-based CMOS Microcontroller features 1 comparator and 128 bytes of EEPROM data memory. The PIC16F676 has a watchdog timer that is controlled by configuration bits. It runs off its own RC oscillator for added reliability. There are two timers that offer necessary delays on power-up. One is the Oscillator Start-up Timer (OST), intended to keep the chip in reset until the crystal oscillator is stable. The other is the Power-up Timer (PWRT), which provides a fixed delay of 72ms (nominal) on power-up only, designed to keep the part in Reset while the power supply stabilizes. There is also circuitry to reset the device if a brown-out occurs, which can provide at least a 72ms reset. With these three functions on-chip, most applications need no external Reset circuitry.
View Complete Details
Pic16f72 I Sp Microcontroller
₹ 62.50/PieceGet Latest Price
| Core Size | 16 Bit |
| Brand | Microchip |
| Part Number | Pic16f72-i/sp |
The PIC16F72-I/SP is a 8-bit CMOS Flash Microcontroller with 5-channel analogue-to-digital converter. This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS flash-based 8-bit microcontroller packs Microchips powerful PIC® architecture into an 28-pin package. It features 5 channels of 8-bit Analogue-to-Digital (A/D) converter with 2 additional timers, capture/compare/PWM function and the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus. There are two memory blocks in this device. These are the program memory and the data memory. Each block has separate buses so that concurrent access can occur. Program memory and data memory are explained in this section. Program memory can be read internally by the user code
View Complete Details
Atmega2560 16au Microcontroller
₹ 650/PieceGet Latest Price
| Brand | Microchip |
| Part Number | Atmega2560-16 au |
ATMEGA2560-16AU is a 8bit microcontroller with 16/32/64KB in-system programmable flash. Peripheral features such as two 8bit timer/counters with separate prescaler and compare mode, Four 16bit timer/counter with separate prescaler, compare and capture mode, real time counter with separate oscillator, four 8bit PWM channels, output compare modulator, 16 channel, 10bit ADC, SPI serial interface, Byte Oriented 2-wire serial interface, programmable watchdog timer with separate on-chip oscillator, on-chip Analog comparator, interrupt and wake-up on pin change. The special microcontroller features power-on reset and programmable brown-out detection, internal calibrated oscillator, external and internal interrupt sources, six sleep modes: Idle, ADC noise reduction, power-save, power-down, standby and extended standby.
View Complete Details
- Developed and Managed by IndiaMART InterMESH Limited
