X

Shine System Solution

Nava Naroda, Ahmedabad, Gujarat

| GST  24AFCPV4105Q1Z5

| TrustSEAL Verified

|

★★★★★
★★★★★
View Mobile Number 69% Response Rate

Our Products

+View All

New Items

Pioneers in the industry, we offer Indfos Pressure Switch, Danfoss Pressure Switch KP36, Ss Gas Sampling Bomb and Silicone Probe from India.

Indfos Pressure Switch
Interested in this product?
Get Best Quote

Indfos Pressure Switch

Rs 869 / NumberGet Latest Price

BrandIndfos
Current RatingNDFOS Pressure Switch IPS -100, Range : 0 To 7 Bar and Adjustable Differential : 0.6 To 6 Bar
Range SettingNDFOS Pressure Switch IPS -100, Range : 0 To 7 Bar and Adjustable Differential : 0.6 To 6 Bar
IP RatingNDFOS Pressure Switch IPS -100, Range : 0 To 7 Bar and Adjustable Differential : 0.6 To 6 Bar
Model Name/NumberIPS-100
Country of OriginMade in India

NDFOS Pressure Switch IPS -100, Range : 0 To 7 Bar and Adjustable Differential : 0.6 To 6 Bar

View Complete Details

Yes, I am interested!

Danfoss Pressure Switch KP36
Interested in this product?
Get Best Quote

Danfoss Pressure Switch KP36

Rs 666 / NumberGet Latest Price

Minimum Order Quantity: 50 Number

BrandDanfoss
Current Rating14
Media TypeBoth
Range Setting14 bat

Danfoss Pressure Switch KP36

View Complete Details

Yes, I am interested!

Ss Gas Sampling  Bomb
Interested in this product?
Get Best Quote

Ss Gas Sampling Bomb

Rs 6,000 / PieceGet Latest Price

Minimum Order Quantity: 10 Piece

Usage/Applicationgassampling
MaterialStainless Steel
ShapeRound
Capacity500 ml

SS GAs sampling 
SS316L
Both side  Valve 500ml
200 bar

Additional Information:

  • Production Capacity: 500
  • Delivery Time: Ex stock
  • Packaging Details: cylinder

View Complete Details

Yes, I am interested!

Silicone Probe
Interested in this product?
Get Best Quote

Silicone Probe

Rs 5,200 / PieceGet Latest Price

Usage/Applicationplasma
Model Name/NumberUSC-F1.2-k0.15
Brandoxford

Ultra-Short Cantilevers (for High-Speed AFM)
NanoWorld Ultra-Short Cantilevers (USC) for High-Speed AFM (HS-AFM) combine very small cantilevers capable of resonating in the MHz regime and a very sharp and wear resistant tip.
The cantilever of the USC series is rectangular and made of a quartz-like material. A gold layer is deposited on both sides of the cantilever in order to enhance the reflectance of the laser beam, but the tip remains uncoated.
The wear resistant tip has been developed together with nanotools GmbH and sustains high velocity scans over long distances. It is made of High Density Carbon/Diamond Like Carbon (HDC/DLC) material which is hard and wear resistant. It has a height of 2.5 microns and a radius of curvature smaller than 10 nm. The aspect ratio is in the order of 5 : 1 and the tilt compensation is 8° ensuring more symmetric AFM images.
The silicon support chip is of standard dimensions (1.6 mm x 3.4 mm x 0.3 mm). Additionally, it has etched and lowered corners in order to avoid contact between the support chip and the sample when scanning. Moreover it features alignment grooves on the back side of the silicon support chip which ensure replacement of the probes without major adjustment of the laser beam when used in conjunction with the alignment chip.
The type USC-F1.2-k0.15 is mainly designed for High-Speed AFM applications in liquid but can also be used for applications in air (depending on the application).
Gold Reflex Coating
The gold reflex coating consists of a 30 nm thick gold layer deposited on both sides of the cantilevers which enhances the reflectance of the laser beam. Furthermore it prevents light from interfering within the cantilever. As the coating is almost stress-free the bending of the cantilevers due to stress is less than 2 degrees
The tip remains uncoated.
System limitations: due to their small cantilever sizes and their very high resonance frequencies USC probes currently cannot be used in all commercially available SPMs and AFMs. Only AFMs with a sufficiently small laser spot and electronics that are capable of dealing with high resonance frequencies of up to 5 MHz are able to work with the USC probes. If in doubt whether these probes can be used in your AFM please check back with us or with your AFM manufacturer.

Cantilever Specifications
Spring k (N/m)0.15 (0.06 - 0.3)
Freq (kHz)1200 (800 - 1600)
Length (µm)7 (6 - 8)
Width (µm)2 (1.5 - 2.5)
Thickness (µm)0.08 (0.06 - 0.1)
ShapeRectangular
MaterialQuartz-like Material
Reflex Coating (nm)Au



Additional Information:

  • Packaging Details: Ultra-Short Cantilevers (for High-Speed AFM) NanoWorld Ultra-Short Cantilevers (USC) for High-Speed AFM (HS-AFM) combine very small cantilevers capable of resonating in the MHz regime and a very sharp and wear resistant tip. The cantilever of the USC series is rectangular and made of a quartz-like material. A gold layer is deposited on both sides of the cantilever in order to enhance the reflectance of the laser beam, but the tip remains uncoated. The wear resistant tip has been developed together with nanotools GmbH and sustains high velocity scans over long distances. It is made of High Density Carbon/Diamond Like Carbon (HDC/DLC) material which is hard and wear resistant. It has a height of 2.5 microns and a radius of curvature smaller than 10 nm. The aspect ratio is in the order of 5 : 1 and the tilt compensation is 8¿¿ ensuring more symmetric AFM images. The silicon support chip is of standard dimensions (1.6 mm x 3.4 mm x 0.3 mm). Additionally, it has etched and lowered corners in order to avoid contact between the support chip and the sample when scanning. Moreover it features alignment grooves on the back side of the silicon support chip which ensure replacement of the probes without major adjustment of the laser beam when used in conjunction with the alignment chip. The type USC-F1.2-k0.15 is mainly designed for High-Speed AFM applications in liquid but can also be used for applications in air (depending on the application). Gold Reflex Coating The gold reflex coating consists of a 30 nm thick gold layer deposited on both sides of the cantilevers which enhances the reflectance of the laser beam. Furthermore it prevents light from interfering within the cantilever. As the coating is almost stress-free the bending of the cantilevers due to stress is less than 2 degrees The tip remains uncoated. System limitations: due to their small cantilever sizes and their very high resonance frequencies USC probes currently cannot be used in all commercially available SPMs

View Complete Details

Yes, I am interested!
© Shine System Solution. All Rights Reserved (Terms of Use)