Shreeji Enterprise, Odhav

Ceramic fibre boards are rigid self supporting insulating product manufactured from Refractory fibres. Ceramic fibre boards are designed for use in application conditions requiring superior insulating properties combined with high rigidity and mechanical strength

FEATURES

 Excellent insulating performance
 Excellent thermal stability?
 Low heat storage
 Resistance to thermal shock
 Good machinability

CLASSIFICATION TEMPERATURE

 STD Board : 1260 ° C
 AZS Board : 1400 ° C
 S Board : 1260 ° C
 E Board : 1100 ° C
 Baffle Board : 1260 ° C &1400° C

APPLICATIONS

 Back up insulation in refractory construction
 High temperature ceramic kiln & cars
 Hot face lining material in furnace building
 Back up insulation in steel ladles
 Back up insulation in Glass melting furnace
 Molten aluminium handling applications

FEATURES

 Faster insulation
 Reduced shrinkage compared to layered lining
 Low heat storage
 Superior to thermal stability and shock resistance
 The resilient blanket is resistant to mechanical damage
 It is versatile and the modules can easily be cut, on the site to suit awkward configurations

CLASSIFICATION TEMPERATURE

 Pyrofold “M” Module : 1260 °C & 1425 °C

APPLICATIONS

 High temperature furnace
 Kiln and heater linings
 Coil annealing furnaces
 Re heat furnace doors lining
 Process heaters lining
 Ammonia reformers and crude oil heaters lining
 Shuttle kiln
 Tunnel kilns

DESCRIPTION

Pyrofold “M” refractory fibre modules are lightweight, insulating linings made in block form for direct attachment to industrial furnace and kiln shells. Pyrofold “M” Modules are made from high quality needled Blanket, pre-compressed to a specific density, and held in position with stainless steel reinforcement and mounting hardware made up of tubes positioned within the folds and connected by yoke on the cold face of the module These prefabricated modules are designed to meet the thermal insulation requirements of high temperature furnaces.
During installation, the modules are further compressed, the resilience of the fibre and recovery ensuring tightly-compressed inter-modular joints.

FEATURES

 Water repellent
 Resistant to thermal shock
 Low thermal conductivity
 Precise geometry and close tolerances
 Homogeneous structure, easy for machining
 Non-brittle
 High fibre content
 Lightweight, low heat storage
 Easy to install

 

DESCRIPTION

Blok 607TM sheets are made from Superwool 607* fibres, mineral fibres and a small amount of organic binder.
Thanks to the high fibre content, Blok 607 sheets are strong, lightweight and thermal shock resistant.
All grades of Blok 607 receive a water repellence treatment to prevent absorption of water or concrete binders.
The panels must be installed so that the side with the product name is in contact with the concrete. When tested on this side, Blok 607 is classified as non hydrophilic (NF P 75-305).
Thicknesses over 50mm are obtained by bonding together two thinner sheets.

High temperature stability
 Thermal shock resistance
 Low heat storage
 Low weight
 Good chemical stability

 

CLASSIFICATION TEMPERATURE

 1260 °C

 

APPLICATIONS

 Inspection door seals
 Gaskets & flange seals
 Expansion joint packing for refractory brick work in furnaces and kilns.
 Pipe wrap or insulation in marine Generators
 Insulation lagging for pipes
 Radiant tube packing in boilers and furnaces
 Asbestos free and ideal replacement for asbestos rope products

 

DESCRIPTION

Twisted Ropes are made from Ceramic Fibre yarn and reinforced with Fibreglass/SS wire.
Braided ropes are made from ceramic fiber enclosed in a Glass fibre braid or SS wire braid to give excellent handling strength.
The above ropes are light weight, resilient, high temperature resistance and chemical stability.

< 25[/av_cell][av_cell col_style='']< 1.0[/av_cell][/av_row] [av_row row_style=''][av_cell col_style='']Density (Nominal) kg/m3[/av_cell][av_cell col_style='']*[/av_cell][av_cell col_style='']200[/av_cell][/av_row] [/av_table] [av_textblock custom_class='']

AVAILABILITY & PACKAGING

 Standard sizes: 4mm – 60 mm Dia X 25 Mtrs Length
 * Density depends on diameter of the Rope.
[/av_textblock]

DESCRIPTION

Ceramic firber Papers are manufactured from high purity refractory fibres and designed for high temperature insulation. Advanced production techniques ensure uniform fibre distribution and close control of thickness and density.
Papers are being produced from Alumina silicate fibres with minimum addition of carefully selected Bonds, which burn out cleanly in service.
All grades of Blok 607 receive a water repellence treatment to prevent absorption of water or concrete binders.
The panels must be installed so that the side with the product name is in contact with the concrete. When tested on this side, Blok 607 is classified as non hydrophilic (NF P 75-305).
Thicknesses over 50mm are obtained by bonding together two thinner sheets

AVAILABILITY & PACKAGING

 Standard sizes: 500 mm width X 1000 mm length
 Standard sizes: 1000 mm width X 1000 mm length

FEATURES

 High flexibility
 Good resistance to tearing
 Precise thickness
 Resistance to thermal shock
 Very low thermal conductivity

 

CLASSIFICATION TEMPERATURE

 STD Paper : 1260 ° C
 AZS Paper : 1400 ° C

High temperature stability
 Thermal shock résistance
 Low heat storage
 Good chemical stability

 

CLASSIFICATION TEMPERATURE 1260 C

1) Cloth
2) Tape

 

APPLICATIONS

 Furnace doors and radiant tube seals
 Blast furnace stove expansion joint
 Coke oven ascension pipe seal, preventing fume emission on exhaust collection system.
 Coke oven door seal preventing gas leakage between refractory and door jamb.
 Piping insulation
 Hot top seal
 Welding curtains
 Insulation between anode buss and box
 Asbestos free and ideal replacement for asbestos cloth products

DESCRIPTION

Firemaster blanket is non-cumbustible, flexible matt manufactured from Alumino-silicate fibre suitable for use in both cellulosic and, hydrocarbon fire protection applications. Firemaster blankets are binder free and hence no risk of smoke or toxic gas emissions or loss of strength during a fire due to binder burnt out.

FEATURES

 Flame spread : Zero
 Smoke Developed : Zero

CLASSIFICATION TEMPERATURE

 1260°C

APPLICATIONS

 Hydrocarbon fire protection of process pipe
 Construction joints, Partition wall
 Cable tray fire protection
 Duct work fire protection
 Cellulosic and hydrocarbon fire protection of structural steel work

TYPE

 Refractory Fire Master Blankets

MAIN PROPERTIES

 Color : White
 Linear shrinkage @ 1200°C/24 hrs : < 3.2 %  Tensile strength kg/m² :
64 kg/m3 : 1200
96 kg/m3 : 2000
128 kg/m3 : 3000

AVAILABILITY & PACKAGING

STD/Cera: Refractory fiber made from alumina and silica.
AZS/Cerachem: Refractory fiber made from Alumina, Silica and Zironia. All above fibers are resistant to chemical attack, except for hydrofluoric and phosphoric acids and strong alkalies.

FEATURES:

• Excellent Thermal stability :resist devitrification at high Temperature
• Low thermal conductivity
• Excellent thermal shock resistance
• Excellent chemical stability
• High resiliency
• Good sound absorption
• Low heat storage capacity

 

CLASSIFICATION TEMPERATURE:

•  STD : 1260 ° C
•  AZS : 1425 ° C
•  CERA : 1260 ° C
•  CERACHEM : 1425 ° C

The Maximum use temperature depends on the application.
In case of doubt, refer to MMTCL Technical service for advice.

 

APPLICATIONS:

• Raw material for the manufacturing finished products such as Boards, Shapes, Paper and Yarn etc.
•  Expansion joints, Patching and emergency repairs in furnaces, Boilers, Heaters etc.
•  Loose insulating fill for crowns and walls of kilns and furnaces.
•  Packing material for temporary repair of insulation
•  Precursor for engineered fibres