Shreemay Enterprises

1. Power supply: DC 12V
2. Temperature measurement range:-40~120
3. Humidity range 0~100%RH
4. Control precision 0.1  0.1%RH
5. Test probe Integrated sensor .                                                                                                         Power supply: DC 12 VTemperature measurement range: -40 to 120 Humidity range: 0~100% RHControl precision: 0.1 0.1% RHTest probe: Integrated sensorOutput: 10A delayDimensions: 65 x 55 x 28 m

Additional Information:

• Delivery Time: 1-2 days

• STC-1000 Can be used for domestic freezer, water tanks, refrigerator, industrial chiller, bolier, steamer, industrial equipments and other temperature-controlled systems.
• Temperature control range: -50 ~ 110 deg C Resolution: -9.9 to 99.9 is 0.1deg C , 1 deg C temperature ranges other Measurement Accuracy: 0.1 deg C Control accuracy: 0.1 deg C Hysteresis accuracy: 0.1 deg C Refresh rate: 0.5 S High temperature protection: 0 ~ 110 deg C Input Power: DC12V
• Measuring inputs: NTC (10K 0.5%) Waterproof sensor Output:10 a relay all the way Environmental requirements: -10 ~ 60 Degrees Celsius Humidity 20% -85% Power consumption: Static current: less than 35MA, Attract current:less than 65MA Easy and convenient to use Size: Approx. 48 (L) x 40 (W) x 14 (D) mm
• Input Operating voltage 12V DC

This is a temperature-controlled thermostat switch that can be used to control the heating/cooling of an object with the help of the NTC sensor to detect the temperature. The module is operated by the 12VDC connected at the input terminals. The module has two output ports where you can connect the equipment to heat or cool the test system.

1. Outdoor use uses involving potential chemical contamination or electrical interference
2. Nuclear energy control systems, combustion systems, railroad systems, aviation systems
3. Medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations
4. Systems, machines, and equipment that could present a risk to life or property
5. Domestic freezer, water tanks, refrigerator, industrial chiller, steamer, industrial equipment, and another temperature-controlled system.

1. Mini temperature controller.
2. With a clear LED display for better readability.
3. Wide temperature measuring range.
4. Dual heating and cooling control.
5. Automatic over-temperature alarm
6. Relay output.
7. High Control precision 0.1 centigrade

1 x STC-1000 DC12V Digital Temperature Controlled Thermostat Switch

Product Description:

W1209 Thermostat Module Has A Temperature Sensor, Keys, Led Display, Relay And Requires Dc 12v Power Supply. It Is An Affordable, Good Quality Thermostat Controller. Thermostats Are Devices That Sense The Temperature Of A System So That The Temperature Is Maintained At The Desired Set Point Or Near To It. Ntc Temperature Sensor Allows The Module To Intelligently Control Varied Electrical Devices Based On The Temperature. Ntc Thermistor Has A Negative Temperature Coefficient, Which Means The Resistance Decreases With Increasing Temperature. W1209 Has An Inbuilt Embedded Micro-controller, Thus Not Much Programming Knowledge Is Required. The Module Consists Of Three Switches To Configure The Various Parameters Including On And Off Trigger Temperatures. The Relay Can Operate At Voltages Up To A Maximum Of 240v Ac At 5a Or 14v Dc At 10a To Power On. The Temperature Is Displayed In Degree Centigrade And With The Help Of 7-segment Display And The Relay, The State Is Displayed With The Help Of The Led Present On The W1209 Module.

Working:-

The Current Temperature Will Be Displayed On The Module In Degree Celsius By Default. When Switched To A Different Mode, Inactivity For Approximately 5 Seconds Would Lead To Restoring The Value Of The Module To The Default Temperature Display.

• The XH-W3001 digital thermostat switch needs a supply voltage of 24V and produces a power of 240W.
• All the important components of the XH-W3001 digital thermostat are protected in a ABS housing.
• This digital temperature controller is equipped with a 1 metre long stainless waterproof probe that has great resistance against corrosion.
• It offers high-temperature control precision of 0.1  The temperature control range from -50 to 110