1)  Mix the base thoroughly prior to mixing with the hardener

2)  Avoid applying in direct sunlight or when the humidity is very high

The surface to be coated should be clean and free from contamination

Mill scale and rust should be completely removed either by mechanically abrading the surface or through abrasive blast clean technique

The substrate should be free from dew as it directly relates to premature product failure

Description:

• MRF MetalCoat is a multipurpose 100% aliphatic polyurethane finish for protection and durability. MetalCoat is available in a wide range of shades for application on metal surfaces and is ideal for grills, metal furniture, machinery components/body, bus bodies, steel structures, chemical plants and brass/bronze wares.
• This coating is available in Clear, Glossy, Metallic and Matt finishes.

Features:

Advantages

• Aesthetic finish with exceptional gloss.
• Excellent gloss and colour retention.
• Exposure to heat and light does not yellow the film.
• Excellent UV resistance.
• Outstanding outdoor durability.
• Excellent corrosion resistance.
• Good resistance to chemicals and stains.
• Excellent flow and levelling characteristics.
• Superior Abrasion resistance.

Where to use

• Grills and gates
• Metal and wood furniture
• Bus bodies
• Steel structures
• Machines & Machinery components
• Chemical plants
• Aluminium components
• Brassware
• Plastic components

• hardcote is a heat resistant aluminum paint based on silicon resin medium designed for protection of steel at elevated temperature. It is used for protection of stacks, kilns exhaust system, incinerators etc.
• surface preparation : surface to be coated with hardcote should be thoroughly clean and free of rust, scale. Dirt, oil and grease and other contaminants. Surface must be dry and cool.
• application : stir thoroughly before and occasionally during use. For initial application two or three coats are required by conventional spray or brush. For brush application use a flat brush only. Avoid repeated brush strokes bor better luster. Generally no thinner is required for brush application. For spray application, thinner upto 5% may be required.
• curing : apply 1st coat. Air dry for 24 hours. Alternatively heat cure at 200c for 1 hour after 4 hours of air drying. Apply 2nd and 3rd coat similarly. Allow the system to dry overnight and then slowly raise the temperature to working temperature (initial increase upto 200c over a 6 hours time period)
• warning :check actual skin temperature before selecting these products. It dose not cure and remains for until heated at minimum 200c for one hour. Painted component should not be handled without heat curing. In confined spaces provide adequate ventilation during application and drying. This is also essential for health and safety of the painter. The fumes given off can be dangerous. Provision laid in factory and boilers act must be adhered to, including the use of flamefroof light, forced drought ventilation and safety lines. Avoid applying thick coat since that may cause blistering/delaminating. Please refer to separate technical data sheet and safety data sheet available on request. If in doubt regarding suitability of use of these products, please consult glossy industrial paints division.
•  
• description :it is better known as aluminum smokestack coating being manufactured with superfine powdered leafing aluminum properly dispersed in silicone vehicles, which resist heat upto 600c (either continuous or intermittent exposure to heat). It is an unique industrial and maintenance heat resistance coating. Thinning :  glossy thinner 023tuses : where high heat resisting coating is requiredfinish : smooth and lustrous. Application : by brush or spray. Covering capacity : 18 - 20sq. Mtr. Per liter with 25-35 microns d. F. T. Drying time : touch dry - 1 hr. Hard dry - 4-6hrs. Tack free - over night. Color range : lustrous (silver)packing : 1 ltrs. And 4 ltrs. Only. Highlights : not requiredshelf life : six months in original sealed container. Undercoats : selfapplication areas : exhaust manifolds boiler doors, smokestacks electrical equipments etc.

Additional Information:

• Delivery Time: SAME DAY
• Packaging Details: 1 LTR , 4 LTR , 20 LTR

Additional Information:

• Delivery Time: SAME DAY
• Packaging Details: 1 LTR , 4 LTR , 20 LTR

To meet diverse requirements of our clients in the best possible manner, we are offering a comprehensive Viper Fire Retardant Paint at very reasonable price.

Additional Information:

• Delivery Time: SAME DAY
• Packaging Details: 1 , 4 , 20 LITRE

BP Zinc Yellow Primer is formulated with a special type of synthetic alkyd binder and micro zinc pigment to withstand high degree corrosion. It is an ideal primer for saline weather and heavily corrosive conditions. It is an air drying primer for Mild Steel and non-ferrous surfaces providing hard and tough film.

Validates our effort in striving towards cleaner, more sustainable future.