SILVERLINE DISTRIBUTOR PRIVATE LIMITED

Brand	Rockford
Model Name/Number	T152-S
Nominal Impedance (Ohms)	4-Ohm
Speaker Type	Component System
Shipping Weight	7.38 Lbs. (3.35 kg.)
Tweeter Size	(Nominal Diameter) 1.0" (25.4 mm)
Crossover	High-Pass (HP): 3.5kHz @ 18dB/octave Butterworth Low-Pass (LP): 3.5kHz @ 12dB/octave Butterworth
Midrange Mounting Depth:	2.03" (52 mm)

The ultimate in Sound Quality can be obtained from a Power series component system. Utilizing a separate audiophile grade tweeter, separate midrange and dedicated 2-way crossover, each part of the system will accurately reproduce music with transparent detail. Goin’ to a car audio competition? You’ll need these!

• Butyl midrange rubber surround
• FlexFit basket design
• OEM adapter plate included
• Treated fabric dome neo-tweeter with integral suspension
• External audiophile grade component crossover
• 5% tolerance high quality poly-capacitors and air-core inductors
• 3 levels of tweeter attenuation
• On-axis/off-axis tweeter configuration
• Recessed tweeter mount uses standard 1-3/4″ hole saw
• 1 Year Warranty

 

PTC Protection

Allows tweeter protection with a bypass resistor for 100% run-time.

Klippel Verified

Klippel is a speaker certification program allowing us to deliver the best possible speakers.

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.

ICC Crossover

The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier installation.

DDC™ Tweeter Mounting

Our DDC™ (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation.

VAST Surround (speakers)

The Vertical Attach Surround Technique significantly increases a subwoofer’s effective radiating cone area up to 25%.

FlexFit Basket – Speaker

The slot mounted frame pattern allows for variable adjustments to the mounting position.

Multi-OEM Adapter

The Multi-OEM Adapter plate allows round component or full-range speakers to fit in certain OEM openings. This allows the speaker the capacity to fit more vehicles.

Brand	Rockford
Model Name/Number	P1694
Power Handling (RMS)	75 Watts RMS 150 Watts Max
Nominal Impedance (Ohms)	4-Ohm
Midrange Size	(Nominal Diameter) 6"x9"
Frequency Response (Hz)	60Hz - 24kHz
Tweeter Size	(Nominal Diameter) 0.75" (19.0mm)
Speaker Type	4-Way Coax

Systems that need a premium drop-in speaker will certainly benefit from this Punch series 6″x9″ full-range speaker. The P1694 offers a similar sonic experience to the P1692, but in a full-filling 4-way array. The Flex Fit™ basket ensures compatibility with odd shaped factory speaker locations and an ICC (Integrated Concealed Crossover) eliminates the need to mount any black boxes.

• FlexFit basket design
• OEM adapter plate included
• PEI dome tweeter
• Butyl midrange rubber surround
• Injection molded mineral filled polypropylene cone
• 1 Year Warranty

Brand	Rockford
Model Name/Number	T4652-S
Speaker Type	Component System
Midrange Size (Nominal Diameter)	6.5"
Midrange Mounting Depth	2.79" (71 mm)
Tweeter Size	(Nominal Diameter) 1" (25 mm)
Tweeter Mounting Depth	0.66" (17 mm)

The Power T4 6.5” component system mimics the performance of our flagship model but includes a crossover that’s effortless to install. The LCP (Liquid Crystal Polymer) dome tweeter features a phase plug that guides high frequency waves toward the listener for an extended frequency response. The woofer features a woven LCP fiber for optimum frequency response. These combined with an asymmetrical 12dB Butterworth crossover offers audiophile sound quality in an efficient 2-way system.

• LCP (Liquid Crystal Polymer) fiber sandwich woofer cone
• Fatigue and tear resistant linear Nomex spider
• FlexFit slot woofer mounting
• Die cast aluminum frame
• Multi-pole™ neodymium motor structure
• VAST (Vertical Attach Surround Technique) Butyl rubber surround
• 1″ (25mm) ring radiator LCP dome tweeter w/ aluminum phase plug
• DDC (Discreet Dual Clamp) tweeter mounting system
• Flush and surface (angled) tweeter mounting hardware included
• Asymetrical 12dB/Oct Butterworth crossover network
• Selectable +2, 0, -2 dB tweeter level settings
• Selectable bi-amp switching
• Selectable on/off axis setting
• Grilles and mounting hardware included
• 1 Year Warranty

Klippel Verified

Klippel is a speaker certification program allowing us to deliver the best possible speakers.

VAST Surround (speakers)

The Vertical Attach Surround Technique significantly increases a subwoofer’s effective radiating cone area up to 25%.

FlexFit Basket – Speaker

The slot mounted frame pattern allows for variable adjustments to the mounting position.

DDC™ Tweeter Mounting

Our DDC™ (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation.

 

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.

IDHS™ T3/T4 Inductive Damping Heat Sink

Secures directly to the top of magnet structure to improve system efficiency by reducing both distortion and back EMF (Electo-magnetic force). Also radiates heat to reduce voice coil temperature.

Brand	Rockford
Model Name/Number	T1650-S
Speaker Type	Component System
Frequency Response (Hz)	47Hz - 20kHz
Tweeter Size (Nominal Diameter)	1.0" (25.4 mm)
Midrange Size	(Nominal Diameter) 6.5"
Nominal Impedance (Ohms)	4-Ohm
Crossover	18dB/Octave High Pass 12dB/Octave Low Passc
Power Handling (RMS)	80 watts RMS 160 Watts MAX

Power series performance and sound quality in a component speaker system. The 6.5” component system features a separate tweeter, dedicated crossover and has a new FlexFit 2 basket optimized for a wide variety of U.S., European, and import vehicles.

• Injection molded carbon fiber filled polypropylene cone
• Linear high excursion matched motor magnetics and suspension design
• 1″ treated fabric dome tweeter
• VAST vertical attach surround technique increases effective radiating cone area up to 25%
• Santoprene rubber surround
• High temp aluminum voice coil
• Fatigue and tear resistant poly cotton spider
• FlexFit 2 mounting
• Stamp-cast aluminum frame
• Asymetrical 18dB HP and 12dB LP external crossover network
• User selectable tweeter level, bi-amp, and on/off axis switching
• Flush and surface (angled) tweeter mounting hardware included
• Grilles and mounting hardware included
• 1 Year Warranty

 

Klippel Verified

Klippel is a speaker certification program allowing us to deliver the best possible speakers.

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.

FlexFit 2 Basket – Speaker

The slot mounted frame pattern allows for variable adjustments to the mounting position, especially for Euro-Fit installations.

DDC™ Tweeter Mounting

Our DDC™ (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation.

VAST Surround (speakers)

The Vertical Attach Surround Technique significantly increases a subwoofer’s effective radiating cone area up to 25%.

Brand	Rockford
Model Name/Number	T3-BMW2
Nominal Impedance (Ohms)	4-Ohm
Frequency Response (Hz)	75Hz - 20kHzc
Speaker Type	Component System
Midrange Size	(Nominal Diameter) 4.0"
Midrange Mounting Depth	1.14" (29.1mm)
requency Response (Hz)	75Hz - 20kHz
Mounting Hardware	Yes

The T3-BMW2 is a full-range direct fit speaker intended to replace or upgrade factory models installed in select BMW® vehicles (see compatibility chart). The speaker is comprised of a 1” silk tweeter with neodymium motor and a woofer with a glass fiber cone. Features an inline passive crossover and BMW® factory connector for easy plug-n-play operation. Made in Germany.

• OEM Frame Style-2
• 4″ 2-way component system
• Glass fiber sandwich cone with Nomex honeycomb core
• Poly-Urethenane Dust Cap
• SBR surround and Bimax spider
• Glass fiber reinforced poly-carbonate frame
• Neodymium ring style magnet
• 25mm voice coil with high temp aluminum former
• Tweeter: Silk diaphragm and surround
• Tweeter: 25mm voice coil
• Tweeter: Neodymium motor structure
• Tweeter: Glass fiber reinforced polyamid frame
• Direct plug-in to factory BMW® harness
• In-line external crossover
• 3 models available (depending upon BMW® series)
• 2-Year Warranty

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.

Klippel Verified

Klippel is a speaker certification program allowing us to deliver the best possible speakers.

Brand	Rockford
Model Name/Number	T3-BMW1
Nominal Impedance (Ohms)	4-Ohm
Frequency Response (Hz)	75Hz - 20kHz
Speaker Type	Component System
Midrange Size	(Nominal Diameter) 4.0"
Midrange Mounting Depth	1.14" (29.1mm)
Mounting Hardware	Yes

The T3-BMW1 is a full-range direct fit speaker intended to replace or upgrade factory models installed in select BMW® vehicles (see compatibility chart). The speaker is comprised of a 1” silk tweeter with neodymium motor and a woofer with a glass fiber cone. Features an inline passive crossover and BMW® factory connector for easy plug-n-play operation. Made in Germany.

• OEM Frame Style-1
• 4″ 2-way component system
• Glass fiber sandwich cone with Nomex honeycomb core
• Poly-Urethenane Dust Cap
• SBR surround and Bimax spider
• Glass fiber reinforced poly-carbonate frame
• Neodymium ring style magnet
• 25mm voice coil with high temp aluminum former
• Tweeter: Silk diaphragm and surround
• Tweeter: 25mm voice coil
• Tweeter: Neodymium motor structure
• Tweeter: Glass fiber reinforced polyamid frame
• Direct plug-in to factory BMW® harness
• In-line external crossover
• 3 models available (depending upon BMW® series)
• 2-Year Warranty
• Includes (1) pair tweeter bezels

 

 

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.

Klippel Verified

Klippel is a speaker certification program allowing us to deliver the best possible speakers.

Brand	Rockford
Model Name/Number	REF9623IX
Sensitivity	@ 2.83V) 94dB
Power Handling	100W RMS, 300W peak
Frequency Respons	46Hz - 30kHz
Impedance	3.0 ohms

They feature edge-driven textile tweeters for smooth, clear highs and the larger models ofter an adjustable tweeter output level control for optimization based on installation location. Oversized Plus One™ woofers offer more surface area for higher bass output and enhanced midrange performance. Plus our newly engineered basket is optimized to fit most factory openings. Available in a range of standard sizes—3″, 4″, 5-1/4″, 6-1/2″, 6″ x 8″ and 4″ x 6″ coaxial, 6″ x 9″ 3-way, and 5-1/4″, 6-1/2″, and 6″ x 9″ component—they’re the perfect upgrade from factory speakers.

1 YEAR WARRANTY

Edge-Driven, Textile Tweeters
The tweeters in Infinity Reference speakers play smooth, never-harsh regardless of output level.

Adjustable Tweeter Output Level
The larger Reference coaxial models and the component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.

Plus One™ Woofer Cone Architecture
Harman’s patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other cones in its class — the result is higher sensitivity, increased low-frequency output and greater musical character.

Optimized Frame Size
Reference speakers are available in a range of standard sizes, and feature a compact design that allows them to fit in just about any vehicle on the road today. That means signature Infinity sound in more vehicles.

Competitive Pricing
Reference speakers provide signature Infinity sound at affordable prices.

Brand	Infinity
Model Name/Number	REF-6520CX
Features 1	1 pair of woofers
Features 2	1 pair of tweeters
Features 3	1 pair of speaker grilles
Feature 4	1 pair of crossovers
Feature 5	1 pair of woofer mounting brackets
Feature 6	1 pair of tweeter surface mount accessories

New Reference speakers are designed to deliver Infinity’s signature sound in more vehicles. They feature edge-driven textile tweeters for smooth, clear highs and the larger models ofter an adjustable tweeter output level control for optimization based on installation location. Oversized Plus One™ woofers offer more surface area for higher bass output and enhanced midrange performance. Plus our newly engineered basket is optimized to fit most factory openings. Available in a range of standard sizes—3″, 4″, 5-1/4″, 6-1/2″, 6″ x 8″ and 4″ x 6″ coaxial, 6″ x 9″ 3-way, and 5-1/4″, 6-1/2″, and 6″ x 9″ component—they’re the perfect upgrade from factory speakers.

1 YEAR WARRANTY

Brand	Alpha
Model Name/Number	6520F
Sensitivity	91dB
Type	6.5" 2-Way Coaxial Speakers
Power Handling:	40W RMS 280W Peak
Frequency Response	55Hz-20KHz
Impedance	4-Ohms

The Alpha Series speakers deliver performance at an amazingly low cost. Injection moulded polypropylene woofers provide a solid base for low and midrange, while PEI-balanced dome tweeters complement the full-range sound with crisp highs. Vocals, winds and stringed instruments in these speakers with powerful bass sound are unsurpassed due to the clarity of the sound of the upper range. It is easy to install in the cabin

Brand	Alpha
Model Name/Number	650 C
Sensitivity (@ 2.83V)	91dB
RMS	45W
PEAK POWER	315W
Warranty	1 year
Frequency Response	55Hz - 20kHz
Impedance	4ohms

New Alpha Series speakers make signature Infinity performance remarkably inexpensive. Injection-molded Polypropylene woofers provide a strong foundation of bass and midrange frequencies, and PEI Balanced dome tweeters complete the full-range sound with crisp, high-end frequencies. Speakers are remarkably transparent at the top with vocals, horns and strings and deliver big bass with plenty of slam. There are Five Alpha models for easy installation in any vehicle, whether it’s a truck, compact or limo. In addition to passing demanding reliability and environmental testing, all speakers are individually voiced by some of the world’s best transducer engineers to authenticate the Infinity sound.

Injection-molded polypropylene cone

The polypropylene woofer cone in Alpha speakers is engineered for superior rigidity and sensitivity. The result is increased low-frequency output and richer, more robust musical character.

NEW Infinity ID design

The new Infinity Alpha speaker has more elegant ID design for young audio junkies who desire an upgrade to their factory sound and style .

Competitively Tuned

Infinity employs second order filters for tweeters and sophisticated two-way crossovers for multi-element speakers and component systems resulting in higher power handling and added flexibility and accuracy when tuning speakers. A higher quality crossover allows Infinity’s wizards to consider speaker acoustic characteristics as well as specifications when tuning the Infinity sound.

Rigid Reliability Testing

Infinity Alpha series speakers have to go through environmental testing that would destroy other speakers. Infinity freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.

Value Engineered

With the goal of providing access to great Infinity sound at an affordable price, our engineers valued engineered the Alpha Series speakers to deliver great sound at an affordable price.

Whats in the Box?

• 2xSpeakers
• 2XGrilles
• 8x screws
• 8x speed clips
• 2X Crossovers
• 2xtweeters
• 2x Infinity Logo Badge

Brand	JL Audio
Model number	C7- 650
Cone and Dust Cap	Vacuum-formed
Suspension design	The moving assembly is suspended and damped via a large-diameter, linear profile spider formed from
Design Bandwidth:	With 48 dB/octave filters: 50 Hz - 5 kHz With 24 dB/octave filters: 60 Hz - 5 kHz With 12 dB/octave
Warranty	1 Year

JL Audio C7-650CW 6.5″ 165mm 2-Way Component Woofer Car Speakers (Single)

6.5-inch (165 mm) Component Woofer, with Grille

C7 is the pinnacle of JL Audio automotive loudspeaker design, benefiting from our most advanced development tools and a complete commitment to precision manufacturing.

The C7-650cw component woofer is capable of operating in a 3-way system, with a midrange and tweeter, or with only a tweeter in a 2-way configuration. Engineered from the ground up, it has exceptional linear excursion capability and outstanding linearity, resulting in solid mid-bass and pure, precise, mid-range performance. Distortion and non-linearities have been minimized through critical optimization of dynamic motor and suspension behaviors.

Passive crossover networks are not included with C7 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning DSP, such as the JL Audio TwK™ 88 or D8, and a dedicated amplifier channel for each C7 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance.

Brand	PRIMUS
Model Name/Number	PR6512ISHI
Features 1	2xSpeakers
Features 2	2xGrilles
Features 3	2x Threaded flush-mount adapters
Feature 4	1xFoam gasket

New Primus speakers feature our patented Plus One™ polypropylene woofers which feature more radiating cone area for increased output and edge-driven tweeters for better high frequency dispersion. Speakers are super clear at the top with vocals, horns and strings and deliver big bass with plenty of slam. Long story short: superior sound top to bottom. True 4 ohm architecture gives the amplifier room to reach peak power for increased depth and detail. There are seven Primus models for easy installation in any vehicle, whether it’s a truck, compact or limo. In addition to passing demanding reliability and environmental testing, all speakers are individually voiced by some of the world’s best transducer engineers to authenticate the Infinity sound. It’s not a coincidence that Infinity is one of the world’s top-selling car audio speaker brands.

1 YEAR WARRANTY

Brand	JL Audio
Model Name/Number	C5-650
Continuous Power Handling (RMS)	75 W
Warranty	1 Year
Recommended Amplifier Power (RMS)	25 - 150 W / Ch.
System Efficiency	89.5 dB @ 1 W / 1 m
System Frequency Response	48 Hz - 25 KHz +- 3 dB

2-Way Component System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Silk Dome Tweeter

The smoothness and transparency of a high-end silk dome tweeter combines with top-flight component woofer performance to create a loudspeaker system with exceptional refinement and dynamic capability.

The C5-650 component system features 6.5-inch (165 mm) component woofers with die-cast alloy baskets and Kurt Müller cones and suspensions. This woofer benefits from JL Audio’s vast woofer design experience and advanced modeling systems.

The C5 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. The flush-mount fixtures feature our RSR (Ratcheting Swivel Rotation) mechanism to allow precise tweeter aiming after installation.

C5 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!

Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.

Sonic character: Smooth and balanced

Made in Germany, Sold as a pair.

 

 

Dynamic Motor Analysis – DMA Optimized Motor

Summary:
JL Audio’s proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients… or put simply: tight, clean, articulate bass.

Detailed Information:
Since 1997, JL Audio has been at the forefront of Finite Element Analysis-based modeling of loudspeaker motors and suspensions. This research is aimed at decoding what we refer to as the “Loudspeaker Genome”… a project aimed at understanding the true behavior of loudspeakers under power and in motion. A major component of this integrated system is DMA (Dynamic Motor Analysis). Starting with the 15W3 and the W7 Subwoofers in the late 1990’s and early 2000’s, DMA has played an important role in the design of all JL Audio woofers sold today, including our component woofers.

DMA is a Finite Element Analysis (FEA)-based system, meaning that it takes a large, complex problem, breaks it down into small solution elements for analysis and then assembles the data to form an accurate, “big-picture” solution. DMA’s breakthrough is that it actually considers the effects of power through the coil as well as coil/cone position within the framework of a time-domain analysis. This gives us a highly accurate model of a speaker’s actual behavior under real power, something that the traditional Thiele-Small models or other low power measurements cannot do. Because DMA does not rely on a steady-state model, it is able to consider shifts in the circuit elements being analyzed. These modeling routines are intense, requiring hours to run for a whole speaker.

Brand	JL Audio
Model Name/Number	C3-650
Continuous Power Handling (RMS)	75 W
Recommended Amplifier Power (RMS)	25 - 150 W / Ch.
System Efficiency	90.0 dB @ 1 W / 1 m
System Frequency Response	48 Hz - 25 KHz +- 3 dB

2-Way Convertible Component / Coaxial System: 6.5-inch (165 mm) Woofer, 1-inch (25 mm) Silk Dome Tweeter

There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.

The C3-650 system features 6.5-inch (165 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio’s vast woofer design experience and advanced modeling systems.

The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.

C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!

Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.

Sonic character: Clean and Powerful

Sold as a pair.

 

 

Convertible Drivers: Coaxial or Component

Summary:
Sometimes a coaxial is the best solution… and sometimes you need to mount the tweeter separately. It’s great to have complete flexibility.

Detailed Information:
Coaxial or Component: Both approaches can yield excellent results.

Coaxial mounting has the benefit of placing the tweeter in close proximity to the acoustic center of the woofer, resulting in more coherent output and predictable crossover behavior. From a purely practical perspective, it also avoids having to cut a separate hole for the tweeter.

Separate mounting has the benefit of placing the tweeter where it is less likely to be blocked by legs or other obstructions. As long as you don’t separate the tweeter too far from the woofer, this approach will still yield good coherence and predictable crossover behavior.

JL Audio’s Convertible Components give you the option of installing the speakers as separate components or as coaxial systems (tweeters mounted onto the center of each woofer). In coaxial mode, the tweeter installs onto a post that attaches to the top of the pole piece with a bayonet-mount mechanism. Short leads are used to connect the tweeter to dedicated terminals on the pole piece (see figures A-D). In separate component mode, a phase plug installs onto the pole piece via the bayonet-mount mechanism (see figures A & F), and the tweeter can be installed with the supplied flush-mount or surface-mount fixtures.

Size	36.2 x 28.6 x 15.2 cm
Brand	Pioneer
Model Name/Number	TS-6965V3
Usage/Application	Car Speakers
Connectivity	3-way
Color	Black
Warranty	1 year
Weight	3.6 Kg
Included	1 Set of Speakers,Instructions Manual and Screws
Feature	Long voice coil: Long voice coil for large displacement,helps in producing strong bass and high pow

Pioneer champion series speakers reproduce bass with clarity, stability and presence that other speakers typically cannot achieve. Speaker cones used for champion series speakers are tougher at handling more high power input at higher volume without compromising higher quality. Though difficult to manufacture, non-pressed paper cones are preferred for their low density and light weight for durability and punchy, powerful sound. Lower density enables precise control over cone movement for accurate sound reproduction new dual layer minimizes unnecessary cone resonance for higher cone durability and clearer sound. More magnetic field increases power output and optimizes heat dissipation. Achieves the best balance between the sound quality and high durability. This system realizes ideal sound reproduction.

Brand	Infinity
Model Name/Number	REF-6522EX
Features 1	1 pair of woofers
Features 2	1 pair of tweeters
Features 3	1 pair of speaker grilles
Feature 4	1 pair of crossovers
Feature 5	1 pair of woofer mounting brackets
Feature 6	1 pair of tweeter surface mount accessories
Feature 7	1 pair of tweeter flush mount accessoriese

New Reference speakers are designed to deliver Infinity’s signature sound in more vehicles. They feature edge-driven textile tweeters for smooth, clear highs and the larger models ofter an adjustable tweeter output level control for optimization based on installation location. Oversized Plus One™ woofers offer more surface area for higher bass output and enhanced midrange performance. Plus our newly engineered basket is optimized to fit most factory openings. Available in a range of standard sizes—3″, 4″, 5-1/4″, 6-1/2″, 6″ x 8″ and 4″ x 6″ coaxial, 6″ x 9″ 3-way, and 5-1/4″, 6-1/2″, and 6″ x 9″ component—they’re the perfect upgrade from factory speakers.

1 YEAR WARRANTY

Brand	Rockford
Model Name/Number	R1675-S
Sensitivity	89
Nominal Impedance	4-Ohm
Speaker Type	Component System
Midrange Size	6.75"
Midrange Mounting Depth	2.0" (51.2 mm)
Power Handling	40 Watts
RMS	80 Watts Max

The Prime Series Component System is a new generation of factory replacement speaker delivering authentic Rockford Fosgate sound. The R1675-S is a dedicated 2-way component system utilizing a Mica injected polypropylene cone for extended frequency response and accommodates direct OEM installation. The tweeter features a Mylar¨ balanced dome to reproduce crystal clear highs, an in-line crossover for simplifying installation, and accommodates flush, surface and angle mounting.

• 1/2″ (13mm) mylar balanced dome tweeter
• Foam surround
• Mica-injected polypropylene cone
• Stamped steel basket
• 1 Year Warranty

Brand	PRIMUS
Model Name/Number	PR6510CSHI
Warranty	1 Year
Features 1	2xSpeakers
Features 2	2xgrilles
Feature 3	2XPlastic multi-hole adapter rings
Feature 4	1xFoam gasket
Feature 5	2xCrossovers

New Primus speakers feature our patented Plus One™ polypropylene woofers which feature more radiating cone area for increased output and edge-driven tweeters for better high frequency dispersion. Speakers are super clear at the top with vocals, horns and strings and deliver big bass with plenty of slam. Long story short: superior sound top to bottom. True 4 ohm architecture gives the amplifier room to reach peak power for increased depth and detail. There are seven Primus models for easy installation in any vehicle, whether it’s a truck, compact or limo. In addition to passing demanding reliability and environmental testing, all speakers are individually voiced by some of the world’s best transducer engineers to authenticate the Infinity sound. It’s not a coincidence that Infinity is one of the world’s top-selling car audio speaker brands.Patented Plus One™ Polypropylene Woofers

Polypropylene cones with up to 35% more radiating cone area than other cones in the same class provide higher sensitivity, increased low frequency output and better tonal balance. Hi-roll rubber surrounds using automotive grade materials result in cleaner reproduction and higher durability whether it’s easy listening or time to show and shine.

Edge-Driven Tweeters

Edge-driven tweeters deliver wider dispersion and smoother high frequency response with increased power handling for high- and mid-frequencies.

True 4 Ohm Architecture

True 4 ohm architecture with low impedance voice coils give the amplifier room to deliver peak power providing stronger and clearer sound with better depth and detail.

Harman Standard Reliability Testing

Infinity speakers have to undergo a testing process that would destroy lesser speakers. Infinity freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.

Voicing of Speakers

Speakers are individually voiced to assure high quality audio versus “off-the-shelf” manufactured sound. This means that specifications as well as speaker characteristics are considered when tuning the Infinity sound.

Infinity at an Affordable Price

This is Infinity—one of the most innovative and legendary companies in audio. Infinity is one of the top-selling car speaker brands in the world—obviously, this is no coincidence.

Brand	JL Audio
Model Name/Number	C2-690TX
Continuous Power Handling (RMS)	70 W
Recommended Amplifier Power (RMS)	15 - 125 W / Ch.
System Efficiency	93 dB @ 1 W / 1 m
Warranty	1 Year
System Frequency Response	53 Hz - 22 KHz +- 3 dB

Coaxial 3-Way Speaker System: 6 x 9-inch (150 x 230 mm) Woofer, 2-inch (51 mm) Cone Mid-Range, 0.75-inch (19 mm) Silk Dome Tweeter | 6×9

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.

The C2-690tx system features 6 x 9-inch (150 x 230 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio’s vast woofer design experience and advanced modeling systems.

The 6 x 9-inch (150 x 230 mm) format is a direct fit in many vehicles.

The Mid-Range driver is ferrofluid-cooled, with a 2-inch Mylar® cone diaphragm to smoothly bridge the gap between the woofer and the dome tweeter.

Tweeters are mounted next to the mid-range driver and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.

Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.

Sonic character: Clean and Dynamic

Sold as a pair.

Brand	JL Audio
Model Name/Number	C2-650X
Continuous Power Handling (RMS)	60 W
Recommended Amplifier Power (RMS)	15 - 100 W / Ch.
System Efficiency	91 dB @ 1 W / 1 m
Warranty	1 Year
System Frequency Response	59 Hz - 22 KHz +- 3 dB

Coaxial Speaker System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Silk Dome Tweeter

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.

The C2-650x system features 6.5-inch (165 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio’s vast woofer design experience and advanced modeling systems.

The 6.5-inch (165 mm) format is a direct fit in many vehicles. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6.5-inch (165 mm) speaker.

Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.

Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.

Sonic character: Clean and Dynamic

Sold as a pair.

Recommended Amplifier Power (RMS)	10 - 100 W / Ch.
Continuous Power Handling (RMS)	60 W
System Efficiency	91.5 dB @ 1 W / 1 m
Warranty	1 year
System Frequency Response	39 Hz - 22 KHz +- 3 dB
Mounting Depth (G)	2.75 in / 70 mm

Coaxial Speaker System: 6 x 9-inch (150 x 230 mm) Woofer, 1.0-inch (25 mm) Aluminum Dome Tweeter

C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.

To facilitate fit, spacer/adaptor rings are included allowing the C1-690x to be installed in bottom-mount applications.

C1 woofer drivers benefit from proprietary FEA modeling and JL Audio’s expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-690x is a proprietary, stamped, steel 6 x 9-inch (150 x 230 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.

Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.

When it comes to value, C1 is the real deal!

Sold as a pair. Grilles not available.

Brand	JL Audio
Model Name/Number	C1-650X
Continuous Power Handling (RMS)	50 W
Warranty	1 Year
Recommended Amplifier Power (RMS)	10 - 75 W / Ch.
System Efficiency	90.5 dB @ 1 W / 1 m
System Frequency Response	48 Hz - 24 KHz +- 3 dB

Coaxial Speaker System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter

C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.

To facilitate fit, multi-application adaptor rings are included with the C1-650x allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the speaker will fit into many “6-inch” speaker locations as well.

C1 woofer drivers benefit from proprietary FEA modeling and JL Audio’s expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650x is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil’s motion. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.

Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.

When it comes to value, C1 is the real deal!

Sold as a pair. Grilles not available.

Brand	Rockford
Model Name/Number	P165-SE
Weight Kilogram	3.5 kg
Midrange Size	(Nominal Diameter) 6.5"
Midrange Mounting Depth	2.24" (57 mm)
Tweeter Size	(Nominal Diameter) 1.0" (25.4 mm)
Power Handling (RMS)	60 Watts RMS 120 Watts Max
Crossover	External tweeter crossover 12dB/octave
Grille/Trim Ring Included	Yes
Mounting Hardware	Yes
Tweeter Mounting Depth	0.50" (13 mm)

Car audio fanatics will love the Punch series 6.50″ component system (similar mounting to the Punch P1650.) It features a Flex Fit2™ basket to ensure compatibility with U.S., European, and import vehicles. European installers will love this new “European Basket” to easily fit a variety of VW, Citroen, and Vauxhall models. The system features an external crossover for more precision of frequency cutoff.

• Injection molded mineral filled polypropylene cone
• Linear high excursion matched motor magnetics and suspension design
• 1″ treated PEI dome tweeter
• VAST vertical attach surround technique increases effective radiating cone area up to 25%
• Santoprene rubber surround
• FlexFit 2 mounting
• Upgraded external crossover
• Stamp-cast aluminum frame
• DDC (Discreet Dual Clamp) tweeter mounting system
• Flush and surface (angled) tweeter mounting hardware included
• Grilles and mounting hardware included
• 1 Year Warranty

Brand	Rockford
Model Name/Number	P1650
Power Handling (Watts RMS)	55 Watts RMS 110 Watts Max
Midrange Mounting Depth	2.24"
Speaker Type	2-Way Coax
Mounting Hardware	Yes
Tweeter Mounting Depth	n / a
Frequency Response (Hz)	45Hz - 20kHz
Crossover	Built-in tweeter crossover
Midrange Mounting Depth	2.24" (57mm)

Fanatics that need a great sounding speaker to replace factory installed versions will certainly benefit from this Punch series full-range speaker. The P1650 offers a Flex Fit2™ basket to ensure compatibility with U.S., European, and import vehicles. European installers will love this new “European Basket” to easily fit a variety of VW, Citroen, and Vauxhall models. The system also features an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes.

• Injection molded mineral filled polypropylene cone
• Linear high excursion matched motor magnetics and suspension design
• 0.75″ (20mm) treated PEI dome tweeter
• VAST vertical attach surround technique increases effective radiating cone area up to 25%
• Santoprene rubber surround
• FlexFit 2 mounting
• Integrated concealed 12dB/Octave crossover components
• Stamp-cast aluminum frame
• Grilles and mounting hardware included
• 1 Year Warranty