Conveying hose lengths are 10', 20', 30', 40' and 50'. Select the hose diameter and length below. Example: A Model 6931-20 is 1" ID Hose x 20' long.

Introducing the Dormer's multi-application MC-X solid carbide end mills cutters that are manufactured from micro-grain, high-quality carbide to provide increased hardness and toughness for excellent wear-resistance and long tool life.

These high-quality reamers have been designed for opening out and finishing holes to H7 tolerance in most ferrous and non-ferrous materials.

Dormer are manufacturers of solid carbide and high speed steel rotary cutting tools such as drills and flute taps that are suitable for a variety of materials.

Introducing the series of high-quality HSS Jobber Drill Bits from Dormer. These professional Drill Bits have been manufactured from high-quality steel and steam tempered to improve wear resistance and durability.

Dormer are manufacturers of solid carbide and high speed steel rotary cutting tools such as drills and flute taps that are suitable for a variety of materials.

Magnetic bases are available for applications where frequent movement of the Air Jet or Nozzle is required. The powerful magnet permits horizontal or vertical mounting that will hold the blowing position of the Stay Set Hose. A shutoff valve is provided that can be used to infinitely vary the force and flow. There are models with single and double outlets.

LOCTITE Gasketing Products – the alternative to conventional compression gaskets to prevent leakage of fluids or gases between flange surfaces.

Our Gasketing Products

LOCTITE gasketing products are a reliable alternative to conventional compression gaskets to prevent leakage of fluids or gases between flange surfaces.

In addition, LOCTITE anaerobic Gasketing products act as both an adhesive and sealant between two flanges. The liquid sealant completely fills the space between the flange surfaces, thereby preventing the escape of fluid materials or gases in composite machine parts or pipe connections. At the same time, adhesion to the flange surfaces enhances the strength of the assembly.

LOCTITE flange sealing products are applied as liquids, allowing them to fill and seal imperfections on metal flange surfaces. These sealants cure in the presence of metal and the absence of air to form a durable seal between components, with maximum face-to-face contact. LOCTITE flange sealants also eliminate corrosion and provide instant low-pressure seal on assembly. After full curing LOCTITE flange sealants will not shrink, crack or relax and they resist displacement better than conventional gaskets.

Advantages of LOCTITE Gasketing as Compared to Conventional Pre-Cut Compression Gaskets

• Reduces inventory by using one product for all designs
• Flows to fill all surface voids and irregularities
• Eliminates gasket relaxation and creep
• Prevents gasket displacement and slippage
• Provides instant seal
• Excellent chemical resistance
• Seals to withstand high pressure when fully cured

LOCTITE Gasketing Products Offer Much Higher Performance and Provide Numerous Benefits over Traditional Sealing Systems such as Pre-Cut Gaskets.

The major causes of failure and leakage of compression gaskets are:

Surface Contact: Compression gaskets do not provide total contact between the gasket and the flange surfaces. Therefore minor leakages may always occur (weeping rate)

Compression Set: Compression gaskets relax under dynamic loads and decrease in thickness, with subsequent loss of bolt tension in the flange joint, resulting in leakage

Displacement: Gaskets can be squeezed out between flanges.

Bolt Hole Distortion: High stresses are transferred to the gasket material under the bolt head, causing the gasket to crack, tear, rupture or extrude

Additional Information:

• Item Code: GS-53

Retaining products have a high load-bearing capacity – with LOCTITE you can find the right product for cylindrical parts. Find out more here!

Our Retaining Products

LOCTITE retaining products secure bearings, bushes and cylindrical parts into housings or onto shafts. They increase maximum load transmission capability and uniform stress distribution and eliminate fretting corrosion. Applied as a liquid, they allow 100% contact between mating metal surfaces, eliminating the need for more expensive designs, time consuming machining and even the use of mechanical methods.

 

Advantages

Advantages of LOCTITE Retaining Compared to Conventional Assembly Methods

• Higher strength with simplified and less costly designs
• Reduces dependence on machining tolerances
• Prevents corrosion and fretting
• Load and stress is distributed evenly over the Joint

When Used in Combination With Interference Fits, LOCTITE Retaining Compounds Allow:

• Higher load transmission and better performance with existing designs and geometry.
• Equal performance with relaxed tolerances.
• Reductions in the size and weight of an assembly.

Problems With Conventional Assembly Methods that LOCTITE Retaining Products Can Help Overcome

Pins, key/keyway assemblies have uneven distribution of mass, an imbalance that can lead to vibration at high speeds.

Splines and serrations cause high stresses due to the “notch effect” that occurs in the area of a key. And they have high machining costs.

Clamp rings, press fits, shrink fits, and taper fits rely on friction alone to transmit torque, therefore they are limited by material, surfaces and design. Close tolerances are needed to obtain specific load capacities, leading to high production costs. Interference fitting creates stresses in the components that can lead to failure, particularly when combined with operational stresses.

Welding and soldering: only compatible metals can be joined, the parts can be distorted by the high temperatures required. Heating of the material can lead to residual stresses and structural degradation. Disassembly can also be difficult or impossible.

Additional Information:

• Item Code: R-54

For applications where frequent repositioning of the Air Nozzle or Jet is required, the Flexible Stay Set Hoses are ideal. Simply mount the hose in close proximity to the application and bend it to aim the airstream at the target. Since the hose has "memory", it will not creep or bend. It always keeps the aim until physically moved to the next position.
Two versions of the Stay Set Hoses are available in a variety of lengths. The 1/4 MNPT x 1/4 MNPT has a 1/4 NPT male fitting on each end and the 1/4 MNPT x 1/8 FNPT has a 1/4 NPT male fitting on one end and a 1/8 NPT female fitting on the other.

Choose the type of nozzle or jet you want to use the Stay Set Hose with and then choose the length. You can also use Magnetic Bases with the Stay Set Hose.