X
View Mobile Number3% Response Rate

Our Products

+View All

Cutting Tools, Broaches and Cutters

Wholesale Distributor of a wide range of products which include Indexable Insert Drills, Parting Grooving Tools, Tapping And Threading Tools, Dormer Metal Cutting Tools, Cold Forming Taps and Thread Milling Cutters.

Indexable Insert Drills
Interested in this product?
Get Best Quote

Indexable Insert Drills

Get Latest Price

The assortment of drilling with Indexable drills offers tools in a wide selection of diameters for drilling depth from 2D to 5D. The drills can be used as a rotary or stationary tool. The drills are single edge and may also work outside axis. It is possible to adjust dimension of the drilled hole within -0.2 to +0.5 mm using an off centred tool. The drills work without problems even under unstable conditions of interrupted cut.
You Should Not Miss.

Every square drilling insert offers 4 cutting edges. Their full applicability is achieved by different geometry and grade of internal and external insert. Internal insert, which must cut in the middle of the drill at zero cutting speeds, is made of tough grade with a very strong chipbreaker. On the other hand external insert is wear-resistant and enables to increase cutting speed at periphery of the tool up to double speed in comparison with solid drills. The right choice of the peripheral insert gradecan thus ensure high productivity and life of the tool.

View Complete Details

Yes, I am interested!

Parting Grooving Tools
Interested in this product?
Get Best Quote

Parting Grooving Tools

Get Latest Price

Get peace of mind with a parting off tool that delivers chip control, long tool life and machining efficiency. Here you will find smart coolant solutions, tough inserts and rigid clamping mechanisms that will help you excel in this critical part of the machining process.
  • CoroCut QD – Reliability and effectiveness when parting-off diameters up to 160mm (6.3 inch), 1-8mm (0.04-0.315 inch)
  • CoroCut 1-2 - Versatile, secure and efficient when parting-off diameters up to 50mm (2 inch), inserts widths 1.5-6mm (0.06-0.236 inch)
  • CoroCut 3 – Cost-efficient, shallow parting-off diameters up to 12mm (0.5 inch), inserts widths 1-2mm (0.039-0.079 inch)
  • CoroCut XS – For parting off small and splander components with diameters up to 16mm (0.63 inch), inserts widths 0.7-2mm (0.028-0.079 inch)
  • CoroMill QD – Parting off with milling cutters
EXTERNAL GROOVING

Our grooving tools, including high-precision coolant, wiper inserts and any conceivable radius, will help you successfully machine any type of groove, resulting in chip control and excellent surface quality.
  • CoroCut 1-2 - The best choice for easy and efficient grooving for grooves up to 120mm (4.724 inch), inserts widths: 1.5-15 mm (0.06-0.591 inch)
  • CoroCut 3 – Cost-efficient mass production of shallow grooves up to 6mm (0.236 inch), inserts widths: 0.5-3.18mm(0.02-0.125 inch)
  • CoroCut QD – Reliable and effective machining of deep grooves up to 80mm (3.15 inch), 1-8mm (0.04-0.315 inch)
  • CoroCut XS – Precision grooving of small and slender components, for grooves up to 3.7mm (0.146 inch), inserts widths: 0.5-2.5mm (0.02-0.091 inch)
  • CoroThread 254 – Stable circlip grooving and other shallow up to depth 2.6mm (0.0102 inch), inserts widths: 1.1-4.15mm (0.043-0.163 inch)
INTERNAL GROOVING

Long overhangs and difficult chip evacuation are part of everyday life when machining internal grooves. That is why we offer dampened boring bars and light cutting inserts in all sizes. If you want internal grooving tools that promise quality and repeatability, this is where to look.
  • CoroCut 1-2 – Secure and efficient grooving in holes down to 25mm (1 inch), inserts widths: 1.5-6mm (0.06-0.236 inch)
  • CoroCut MB – Internal grooving of holes down to 10mm (0.393 inch) with long overhangs, inserts widths: 1-3.18mm (0.039-0.125 inch)
  • CoroCut QD – For deep internal grooves in holes down to diameter 55mm (2.165 inch), inserts widths: 2-6mm(0.08-0.236 inch)
  • CoroThread 254 – Cost-efficient circlip grooving and other shallow of holes down to 12mm (0.5 inch), inserts widths: 1.1-4.15mm (0.043-0.163 inch)
  • CoroTurn XS – When grooving external small high-quality holes down to 4.2mm (0.165 inch), inserts widths: 0.78-2mm (0.031-0.079 inch)
  • T-Max Q-Cut – Excellent for internal grooves in holes down to 12mm (0.5 inch), inserts widths: 2-8mm (0.079-0.315 inch)
FACE GROOVING

Reliable face grooving of medium to large diameters
  • CoroCut 1-2 - Reliable face grooving of grooves with diameters up to 34mm (1.338 inch) and depths up to 28mm (0.79 inch), inserts widths: 3-8mm (0.118-0.315 inch)
  • CoroCut MB – Face grooving of high precision grooves with diameters down to 6mm (0.236 inch) and depths up to 10mm (0.393 inch), inserts widths: 1-4mm (0.039-0.157 inch)
  • CoroTurn XS – Easy-to-use face grooving tool for diameters down to 0.2mm (0.008 inch) and groove depths up to 30mm (1.181 inch), inserts widths: 1-5mm(0.039-0.197 inch)
  • T-Max Q-Cut – Face grooving of groove diameters down to 16mm (0.629 inch) and groove depths up to 20mm (0.79 inch), inserts widths: 3-6mm (0.118-0.236 inch)




Additional Information:

  • Item Code: PGT-02

View Complete Details

Yes, I am interested!

Tapping And Threading Tools
Interested in this product?
Get Best Quote
We are involved in offering a wide range of Tapping And Threading Tools to our most valued clients. Our range of Tapping And Threading Tools is widely appreciated by our clients which are situated all round the nation. We offer our range of Tapping And Threading Tools at most affordable prices.

View Complete Details

Yes, I am interested!

Dormer Metal Cutting Tools
Interested in this product?
Get Best Quote
We are involved in offering a wide range of Dormer Tool to our most valued clients. Our range of Dormer Tool is widely appreciated by our clients which are situated all round the nation. We offer our range of Dormer Tool at most affordable prices.

View Complete Details

Yes, I am interested!

Cold Forming Taps
Interested in this product?
Get Best Quote

Cold Forming Taps

Get Latest Price

EMUGE is the first threading tool manufacturer worldwide to introduce a programme of cold-forming taps specially designed for the machining of specific materials or material groups. While this was possible only for cutting tools in the past, we have now succeeded in designing cold-forming taps especially for the special properties of single materials and material groups, sometimes increasing performance in a dramatic way.

Conventional cold-forming taps were made for the use in all ductile materials: potential performance features in defined applications were simply wasted in the process. EMUGE has made extensive investigations into the mechanisms of cold forming for years, and developed an entirely new tool generation from the results.

In order to highlight the uniqueness of this highly innovative programme of cold-forming taps, we have thought of a new name:
InnoForm

The geometry abbreviations of the different designs fit in seamlessly with those already used by EMUGE, so that the single tools can be easily ­recognized. For instance, there is a new cold-forming tap type InnoForm 1-Z, the application possibilities of which correspond generally to those of our well-known cutting tap Rekord 1B-Z.

Additional Information:

  • Item Code: 18

View Complete Details

Yes, I am interested!

Thread Milling Cutters
Interested in this product?
Get Best Quote

Thread Milling Cutters

Get Latest Price

The increasing use of CNC technology has created the basic conditions for the most future-oriented process for internal and external thread production.

In a large number of cases, thread milling is a very useful alternative to thread cutting or cold forming of threads. It offers the following advantages:
  • Thread production almost independent of size and tolerance.
  • One tool only for both right- and left-hand threads.
  • No trouble with chips, because only small milling chips are produced.
  • No axial miscutting (overcut first threads) of threads.
  • Highly economic cycle times due to high cutting speeds and feeds.
  • Very low cutting pressure for the machining of thin-walled workpieces.
  • With a BGF-type thread milling cutter, several machining operations can be realised with just one tool.
The EMUGE thread milling cutter programme includes
  • Tools of solid carbide and HSS materials
  • Tools with internal coolant-lubricant supply
  • Tools with high-efficiency hard surface coatings
With these performance characteristics, it covers an extremely broad range of work cases.

The thread milling cutters of our Gigant series are circular thread milling cutters with exchangeable thread inserts for the economically efficient production of large and deep internal and external threads on modern CNC machines.

MoSys is a counterbore and stepped-bore system for free combination which makes a large number of ­machining tasks, like drilling, countersinking, ­counterboring and threading in one clamping process possible. We will be happy to support you in the selection of tools and in programming work. Please contact our service technicians.

Additional Information:

  • Item Code: 19

View Complete Details

Yes, I am interested!

Indexable Insert Drills
Interested in this product?
Get Best Quote

Indexable Insert Drills

Get Latest Price

The assortment of drilling with Indexable drills offers tools in a wide selection of diameters for drilling depth from 2D to 5D. The drills can be used as a rotary or stationary tool. The drills are single edge and may also work outside axis. It is possible to adjust dimension of the drilled hole within -0.2 to +0.5 mm using an off centred tool. The drills work without problems even under unstable conditions of interrupted cut.
You Should Not Miss.

Every square drilling insert offers 4 cutting edges. Their full applicability is achieved by different geometry and grade of internal and external insert. Internal insert, which must cut in the middle of the drill at zero cutting speeds, is made of tough grade with a very strong chipbreaker. On the other hand external insert is wear-resistant and enables to increase cutting speed at periphery of the tool up to double speed in comparison with solid drills. The right choice of the peripheral insert gradecan thus ensure high productivity and life of the tool.

Additional Information:

  • Item Code: 08

View Complete Details

Yes, I am interested!

Solid Drills Tool
Interested in this product?
Get Best Quote

Solid Drills Tool

Get Latest Price

The standard assortment of solid drills covers all basic drilling areas. Besides the usual tools, there are also step drills under threads, which drill a hole including chamfering. There is a set of chamfers with different angles of points for chamfering. You Should Not Miss

The absolute top among the solid drills made of cemented carbide is 308FA line. Not only due to its length and colour shade of the coating. These are four-facet solid drills with polished helical, which provide high accuracy of drilled holes and quality of their surface. The parameters and productivity of this line of drills will satisfy even the most demanding customer.The offer of solid drills has been completed with a line for drilling of corrosion-resistant steels (M material group), which is suitable for soft steels, difficult-to-machine materials (S group) and easy-to-machine alloys of non-ferrous metals (N group).

Additional Information:

  • Item Code: 09

View Complete Details

Yes, I am interested!

Cutting Tools And Appliances
Interested in this product?
Get Best Quote
We are involved in offering a wide range of Cutting Tools And Appliances to our most valued clients. Our range of Cutting Tools And Appliances is widely appreciated by our clients which are situated all round the nation. We offer our range of Cutting Tools And Appliances at most affordable prices.

View Complete Details

Yes, I am interested!

Band Saw Blades
Interested in this product?
Get Best Quote

Band Saw Blades

Get Latest Price

We are involved in offering a wide range of Band Saw Blades to our most valued clients. Our range of Band Saw Blades is widely appreciated by our clients which are situated all round the nation. We offer our range of Band Saw Blades at most affordable prices.

View Complete Details

Yes, I am interested!

Threading Tools
Interested in this product?
Get Best Quote

Threading Tools

Get Latest Price

Thread turning is a demanding operation, where chip control and consistent tool life are critical to success. Our extensive assortment of thread turning tools covers a wide range of thread profiles and pitches. Choose one of these tools and ensure efficient, secure thread turning.

  • CoroThread® 266 – The Best choice for ultra-rigid threading of all thread types
  • CoroCut® XS – External threading of small components
  • T-Max Twin-Lock® – For oil pipe threading

 

Internal Thread Turning

  • CoroThread® 266 – The best choice of threading of hole diameters down to 20mm (0.787 inch)
  • T-Max U-Lock® – Cost-efficient solution for threading of holes down to 12mm (0.5 inch)
  • CoroCut® MB – For high-precision threading of hole diameters down to 10mm (0.394 inch)
  • CoroTurn® XS – For threading of small hole diameters down to 4.2mm (0.165 inch)
  • T-Max Twin-Lock® – For oil pipe threading of hole diameters down to 60mm (2.374 inch)

THREAD MILLING

Thread milling is ideal when machining asymmetric or tough materials, and when you’re experiencing chip-breaking problems. Whatever your project or method, we have the right thread milling tool for you. Our range of tools covers internal and external machining, small part machining, medical solutions and other applications.

  • CoroMill Plura® – Secure threading in a wide range of materials
  • CoroMill® 325 – Productive high-precision thread whirling cutter for long and slender components
  • CoroMill® 326 – Versatile and cost-efficient cutter with three cutting edges for internal threading and chamfering in small holes
  • CoroMill® 327 – Flexible cutter with multiple edges for many types of applications
  • CoroMill® 328 – Economical and stable internal and external threading

TAPPING

Developed for through holes and blind-hole operations, CoroTap tools feature an enhanced edge design and material grade to ensure reduced axial forces and torque. The CoroTap line, covering a variety of different thread profiles, has two areas: taps optimized for specific materials and taps optimized for flexibility.

  • CoroTap™ 100 – Straight flute tap optimized for short – chipping materials
  • CoroTap™ 200 – Spiral point taps for through holes
  • CoroTap™ – 300 – Spiral flute taps for blind holes
  • CoroTap™ – 400 – Forming tap for through and blind holes


Additional Information:

  • Item Code: TT-03

View Complete Details

Yes, I am interested!

Turning Tools
Interested in this product?
Get Best Quote

Turning Tools

Get Latest Price

Do you struggle with long overhangs or have trouble evacuating chips in your internal turning operations? Our assortment, including high-precision coolant, CoroTurn® SL modularity and Silent Tools™ damped boring bars, has the perfect tool for your task.

Longitudinal Turning:
  • T-Max® P - Turning of large holes diameters from 70mm
  • Coro Turn® P  -  Efficient turning of small to medium sized from 6mm
  • CoroCut® MB -  For high precision turning of small to medium holes from 10mm
  • CoroTurn® XS -  High precision turning of small holes from 0.3mm
Profiling :
  • CoroTurn® TR - Optimized for profiling of large from 40mm
  • CoroTurn® 107 - Efficient profiling of small to medium holes from 8.5mm
  • CoroCut® MB - High precision profiling of small to medium holes from 10mm
  • CoroTurn® XS -High precision profiling of small holes from 4.2mm

Adaptor Systems for Turning :

  • Coromant Capto® - Quick change tool holders for turning centres
  • CoroTurn® SL – Modular tooling system of adaptors and exchangeable cutting heads
  • EasyFix – Sleeves for correct mounting of cylindrical bars

 

EXTERNAL TURNING

Do you want a turning tool that delivers chip control, process security and the highest component quality? Use our tool holders and inserts to achieve the best performance possible. Whether you are making a long cut or need a high metal removal rate, our tools will get the job done

Longitudinal Turning and Facing :

  • CoroTurn® 300 – Effective and high-quality turning to medium-sized components
  • T-Max®P – Productive turning of large to medium sized components
  • CoroTurn®107 – Optimized for turning medium to small components
  • CoroCut®XS – Precision turning of small and slender components
  • CoroTurn®TR – Combined tool for longitudinal turning and profiling with high precision

Profiling:

  • CoroTurn®TR – Optimized for high precision profiling
  • CoroTurn®107 – Productive profiling of medium to small components
  • CoroCut®1-2 – Efficient profiling with round inserts

Adaptor System For Turning

  • Coromant Capto®- Quick change tool holders for turning centres
  • QS holding system – Quick change tool holders for sliding head machines
  • CoroTurn®SL – Modular tooling system of adaptors and exchangeable cutting heads


Additional Information:

  • Item Code: TT-01

View Complete Details

Yes, I am interested!

Tap Holders
Interested in this product?
Get Best Quote

Tap Holders

Get Latest Price

Collet holders and quick-change tap holders Softsynchro® series for use on machines with synchronous spindle

Collet holders and quick-change tap holders KSN series for use on CNC machining centers and conventional machine tools

Collet holders and quick-change tap holders Softsynchro®/MMS and KSN/MQL series for use on machines with minimum-quantity lubrication (MQL)

Quick-change tap holders SFM series for use on multi-spindle machines and transfer lines

Tapping attachments SWITCH-MASTER® and GRN-NC series for use on CNC machining centers and special machines with and without synchronous spindle

Tapping attachments GR and GR-S series for use on pillar drilling machines with manual feed

Quick-change tap holders HF serials for use on CNC machining centers and boring mills, for the production of big threads up to M160

Quick-change adapters EM series

Suitable for all our quick-change tap holders of KSN, SFM and GR-S series. Depending on the type: with coolant-lubricant supply through the tool centre or along the shank, overload clutch and length adjustment.

Clamping of the tool is achieved –depending on the type – by a ball clamping system, collets type ER (GB), collets type PGR (GB) or by our patent-protected E-Lock system.

Additional Information:

  • Item Code: 20

View Complete Details

Yes, I am interested!

Milling Tools
Interested in this product?
Get Best Quote

Milling Tools

Get Latest Price

SHOULDER MILLING, EDGING

Whether you are milling deep shoulders, trying to avoid vibration, or require specific and precise contours, you will find the shoulder milling tool you need here. Our comprehensive assortment of CoroMill shoulder milling cutters provide top-quality performance and reliability.

General Shoulder Milling
  • CoroMill 490 – The first choice for general and repeated shoulder milling
  • CoroMill 390 – Versatile shoulder milling and ramping cutters for mixed production
  • CoroMill 331 – For radially wide shoulders and back facing of hidden shoulders
  • CoroMill – 790 – The first choice for aluminium
  • CoroMill 316 – Solid carbide exchangeable heads
  • CoroMill Plura – Small diameter shoulder milling with close tolerances
  • Deep Shoulder Milling With Long Edge Cutters
  • CoroMill 390 – The first choice for long edge cutting
  • CoroMill 690 – Optimized for titanium
  • T-Max long edge – The first choice for finishing
  • Shoulder Milling With Long Overhang
  • CoroMill 390 – Interated Silent Tools damped milling cutters
  • CoroMill 490, CoroMill 390 and CoroMill 790 – With Silent Tools adaptors
  • Coromant EH – Cutter heads with shanks or Silent Tools adaptors

FACE MILLING

If you need a face milling tool to efficiently machine flat surfaces, look no further. From heavy duty roughing in tough conditions to the final finishing required for high-quality surfaces, we have the face milling cutter to get the job done.

Heavy Duty Roughing

  • CoroMill 360 – For extremely tough conditions in powerful machines
  • CoroMill 357 – Cost-efficient 10-edge cutters for steel and cast iron
  • CoroMill 245 – Multipurpose cutters for mixed production
  • CoroMill 200 – For demanding materials and applications
  • Roughing to Semi-Finishing
  • CoroMill 345 – First choice for high productivity
  • CoroMill 245 – Multipurpose cutters for mixed production
  • CoroMill 331 – Back facing and vibration-prone applications
  • CoroMill 490 – For compoents with a 90 digree wall or narrow fixturing
  • CoroMill 210 – First choice for high-feed face milling in steel and cast iron
  • CoroMill 419 – High-feed concept for stainless steel and heat-resistant super alloys
  • CoroMill 200 – Robust face milling and profiling cutter
  • CoroMill 300 – Face and profile milling cutters
  • CoroMill S-60 - Extra-close pitch cutters for high metal removal rate in cate iron
  • Auto Roughing – Extra-close pitch cutter for automotive transfer lines
  • CoroMill 365 – Cost-efficient machining close to walls in cast iron


HIGH-FEED MILLING

The main advantage of high-feed face milling is extremely high productivity. In order to use high-feed milling, you need a small entering angle. We have a range of high-feed milling tools, including indexable, solid, and exchangeable head, that enable you to take advantage of this fast process.

  • CoroMill  210 – For steel and cast iron
  • CoroMill 419 – For stainless steel and heat-resistant super alloys
  • CoroMill  316 – Exchangeable solid carbide heads
  • CoroMill  Plura – Small diameter shoulder milling with close tolerances

 

COPY MILLING, CONTOURING

Whether you’re profiling, copy milling, or some other form of 3D milling, you’ll find the ball nose or round insert cutters you need here to get the job done right. Our ball nose cutters include both indexable and solid versions.



Additional Information:

  • Item Code: MT-04

View Complete Details

Yes, I am interested!

Cutting Tools
Interested in this product?
Get Best Quote

Cutting Tools

Get Latest Price

We are involved in offering a wide range of Cutting Tools to our most valued clients. Our range of Cutting Tools is widely appreciated by our clients which are situated all round the nation. We offer our range of Cutting Tools at most affordable prices.

View Complete Details

Yes, I am interested!

Chucking Tool
Interested in this product?
Get Best Quote

Chucking Tool

Get Latest Price

We are involved in offering a wide range of Chucking Tool to our most valued clients. Our range of Chucking Tool is widely appreciated by our clients which are situated all round the nation. We offer our range of Chucking Tool at most affordable prices.

View Complete Details

Yes, I am interested!

Indexable Insert Drills
Interested in this product?
Get Best Quote

Indexable Insert Drills

Get Latest Price

  • This tool is designed to produce ports that adhere to the ISO 6149-1:1993 (SAE J-2244-1) metric specification.
  • Allied's AccuPort 432® Port Contour Cutters are produced to strict manufacturing tolerances.
  • This provides the customer with the assurance that the forms produced are within the finish tolerances of each specification.
  • Drill and finish forms port in ONE operation.
Patented Design
  • For ports and stud ends with straight threads and o-ring sealing.
  • Eliminates the need for pre-drilling.
  • Allows for efficient set-up and production time.
  • Saves on tool cost.
  • Replaceable insert design eliminates regrinding and resetting.
Also Available in:
  • SAE J-1926 (ISO 11926-1)
  • MilSpec - SAE AS5202 (Formerly MilSpec MS-33649)
  • John Deere

GEN3SYS® XT HIGH PENETRATION DRILLS

GEN3SYS® XT high penetration drills utilize corner and cutting edge enhancements combined with our new AM300® coating to deliver more durability, reliability, and productivity. The GEN3SYS® XT geometry is designed to increase penetration rates and tool life, providing the lowest cost per hole among high penetration drill lines.

Features & Benefits:

  • Available in 4 Geometries: Standard (XT), Austenitic Stainless Steel (AS), Cast Iron (CI) and Low Rake (LR)
  • Provides excellent chip control, improved durability and added stability
  • Available in Stub, 3xD, 5xD & 7xD
  • Utilizes Standard GEN3SYS® Holders
  • Diameter Range: 11mm to 35mm


Additional Information:

  • Item Code: 14

View Complete Details

Yes, I am interested!

Get in touch with us

Reach Us

S. K. EnterprisesPlot No. 639, Industrial Area - 9, S. A. S. Nagar, Phase 9, Mohali-160062, Punjab, India

Rajneesh Gupta (Proprietor)

View Mobile Number3% Call Response Rate

Send SMS
Send Email
Send Payment
Leave a Message, we will call you back!
Send your enquiry to this supplier
terms privacy policy

We Accept Online Payments

All Rights Reserved (Terms of Use)