S. K. Enterprises

NEAT METALWORKING OILS

As neat cutting oils are not mixed with water, they provide better tool life and surface finishes for difficult operations at low speeds than water soluble cutting oils. The maintenance of neat cutting fluids is also easier and provides a longer coolant life.

The main disadvantage of neat cutting oils is the poorer cooling capability compared to water soluble cutting fluids, particularly with high speed machining. Therefore, neat cutting oils are mainly used for honing, deep hole drilling, grinding and broaching oils.

Our FUCHS ECOCUT range of neat cutting oils have been designed to provide high performance under arduous machining conditions.

• ECOCUT HFN GB LE Range
• ECOCUT PD-14
• ECOCUT SD-32
• PLANTOCUT 10 SR PLUS

WATER SOLUBLE OILS

Soluble cutting fluids are metalworking fluid concentrates which when mixed with water form an emulsion. The appearance of the emulsion depends on the particle size of the dispersed oil.

Water soluble cutting oils, because of their good thermal conductivity, have the ability to dissipate heat more readily than neat cutting oils. Consequently water soluble coolants have become vital in achieving the higher feeds and speeds required to ensure maximum production efficiency.

Generally used at between 2-10% concentrations in water, water soluble cutting fluids allow significant costs savings over neat cutting oils on most applications.

The extensive FUCHS' soluble cutting fluids range encompasses products for all work-piece materials, machining applications and water types. From machining of titanium in the aerospace industry through to the machining of aluminum castings in the automotive industry, FUCHS can provide you with the right coolant to meet your needs.

ECOCOOL GLOBAL 10 - The New Benchmark In Cutting Fluids

High performance metal working fluids are essential for the metal machining industry. Growing global production is increasingly affected by national chemical registries, legislation and labeling requirements. In response to these changing market demands FUCHS developed a novel chemical approach for a new generation of aerospace machining fluids. ECOCOOL GLOBAL 10 is the culmination of many years of intensive research.

• Increased productivity
• Long life span
• Low in cost use
• Long tool life
• Non skin irritating
• For all metal applications
• Meets global legislative and labelling requirements in over 19 countries

ECOCOOL GLOBAL 10 is the new benchmark in cutting fluids.

MINIMUM QUANTITY LUBRICATION

Minimum Quantity Lubrication (MQL) is the process of applying very small quantities of high lubricity oil, mixed with air, at the point of precise contact between the tool and the workpiece.

Minimum Quantity Lubrication provides micro-lubrication for near dry machining; an ultra-thin layer of lubricant is applied reducing friction and heat between the cutting tool and the work piece.

MQL reduces or eliminates problems associated with thermal shocking of the machine piece (where the machine tool becomes hot and then shatters when it is cooled by the cutting fluid).

Minimum Quantity Lubrication also reduces mist and spray, providing more acceptability when used on unenclosed machines and MQL cutting fluids can be classed as alow emissiona(TM) lubricants.

Grease is a liquid lubricant with a solid or semi-fluid thickener, such as soap or PTFE. Grease fulfills the same requirements as other lubricants – to reduce friction and wear, protect against corrosions, and to dissipate heat.

FUCHS is a leading supplier of greases, supplying grease for all industry sectors worldwide. We have a comprehensive portfolio of greases covering a wide variety of applications and specifications.

Lubrication has a significant influence on the behaviour of compressors and their reliability. It is therefore vital that the right lubricant is selected to ensure reliable, economical and safe operation.

FUCHS has developed a complete range of technically advanced, high performance compressor oils to offer you “best in class” lubricant technology for your asset.

Mineral and synthetic variants are available for all types of compressors, most with approvals from leading OEM’s, to maintain maximum efficiency and protection.

• RENOCLEAN 269
• RENOCLEAN ISO
• RENOCLEAN KLV
• RENOCLEAN MS 214 F
• RENOCLEAN MS 215 NF
• RENOCLEAN MSO 3004
• RENOCLEAN S 237 BF
• RENOCLEAN VR 1021 CXV
• RENOCLEAN VR 1798/2

CORROSION PREVENTIVES

FUCHS UK is a full line supplier of lubricants and provides customers with local manufacturing, first class logistics and specialist technical support. We research, develop and manufacture bespoke lubricants, technology that is approved for use by leading manufacturers and available globally via the FUCHS organisation.

We specialise in developing products for extreme tri bological problems. Our corrosion preventatives have been developed to maintain optimal surface finish, minimise waste or product recalls and reduce overall costs.

At FUCHS, we believe that the perfect lubricant partner should not only supply high performance lubricants, but also provide service and support to customers. Our experienced team work closely with customers, and can assist with product solutions for difficult application areas such as long term storage or wet environments.

• VCI
• ANTICORIT DF
• ANTICORIT MKR
• ANTICORIT OHK

• Agricultural Engine Oils
• COMMERCIAL VEHICLE
• PASSENGER CARS
• PLANT CONSTRUCTION
• STATIONARY GAS ENGINE

We have carved a remarkable niche in the industry as an excellent distributor, wholesaler and supplier of Hydraulic Oils. These oils are specially meant for transferring energy and signals through fluids. Therefore, our provided range is suitable for power hydraulic system in order to performing applications in automobile brakes, garbage truck lifts and aircraft flight controls. Our proposed Hydraulic Oils are fabricated while selecting a premium grade of raw material that is sourced from trustworthy vendors of market. These oils are accessible to our clients in numerous specifications at cost effective prices.

Features:

• Optimum viscosity
• Reduce maintenance level
• Enhance machine life

HYDRAULIC OILS

Hydraulics describe the transfer of energy and signals through fluids; power is transferred to drive, control and move.  Hydraulics fluids based on mineral oils, synthetic fluids and fire-resistant fluids are used in all types of machinery and equipment. 

Modern hydraulics can be divided into three principle areas: stationary, mobile and aviation hydraulics.  Each of these areas makes special demands on its components and the hydraulic medium.  The performance of hydraulic systems has increased significantly, which is reflected in higher pressures, higher system temperatures and lower system volumes.

Hydraulic fluid developments are of enormous significance – optimum applications save energy, reduce maintenance intervals, reduce wear, increase machine life and thus enable worthwhile savings.  Our commitment to R&D ensures we’re able to provide hydraulic fluids based on the latest technology.

FORMING LUBRICANTS

At FUCHS we research, develop and manufacture bespoke lubricants; technology that is approved for use by leading manufacturers and available globally via the FUCHS organisation.

We specialise in developing products for extreme tribological problems. Our forming lubricants provide exceptional tool and work piece protection.

The metalworking process involves many complex steps that are interdependent and carefully matched. The lubricants used throughout the process need to guarantee optimum process compability.

Cross-compability is constantly monitored in our state-of-the-art research facilities and laboratories. Our quality checking quarantees a reliable process chain starting with forging, forming, and metal cutting through cleaning, corrosion protection and coating.

Decades of experience, technical expertise and global approvals from leading manufacturers makes our product programme unique.

Suitable for all metals, especially yellow metals that are sensitive to staining.

• RENOFORM MBO
• RENOFORM HBO
• RENOFORM HBT
• RENOFORM HBX
• RENOFORM HFL
• RENOFORM LVO
• RENOFORM MBO 2907
• RENOFORM MBW 2755
• RENOFORM MBW
• RENOFORM UBO

Forging lubricants

FUCHS is a full line supplier of lubricants and provides customers with local manufacturing, first class logistics and specialist technical support.

We research, develop and manufacture bespoke lubricants, technology that is approved for use by leading manufacturers and available globally via the FUCHS organisation.

We specialise in developing products for extreme tribological problems, Our LUBRODAL and HYKOGEEN product range helpsfacilitate the flow of materials, improves mould release and demonstrates good cooling effect during the forging process.

At FUCHS, we believe that the perfect lubricant partner shoul not only supply high performance lubricants, but also provide service and support to costumers. Our experienced team work closely with costumers, and can assist with product solutions for difficult application areas.

• LUBRODAL F 21 A SET
• LUBRODAL F 33 AL
• HYKOGEEN 217
• HYKOGEEN 87/3
• HYKOGEEN 87/40
• HYKOGEEN UMD 2/1