Smart Technologies

Inclinometers of high measuring accuracy for inclination measurement in the ranges of ±10, ±30 and ±80 degrees with a non-amplified, non-conditioned output signal. The NG2, NG3 and NG4 are capacitive, liquid based inclinometers with integrated sensor electronics. They are manufactured with an analog DC output. The sensor electronics require only minimal power and are in conjunction with the capacitive primary transformer characterized by high accuracy and high long-term stability. The measurement technique enables a linear relationship between the angle to be measured and the output signal. The determined angle is independent of the local gravitational acceleration, that means that no matter where the measurement is being taken, whether in Europe, Australia, on Mount Everest or on the moon, the inclination will be measured correctly anywhere.

Application; The inclinometers NG2, NG3 and NG4 are suitable for applications requiring high measurement accuracy with low linearity deviations and high long-term stability for measurement of relatively large inclination angles. Typical areas of application include construction, mining, vehicles, surveying equipment, aircraft, transportation and conveyor systems as well as ships.

Features

• Linear output characteristics
• High measurement accuracy
• Minimal linearity deviation
• High long-term stability
• Hysteresis free output signal
• Minimal zero point drift
• Integrated sensor electronics
• Low power consumption
• Different output signal options
• No interference by ambient electromagnetic fields
• Shockproof as without moving mechanical parts
• Hermetically sealed
• Sensor electrically isolated within the housing from point of measurement - no ground connections
• Zero point adjustable through 360° using clamping ring

Inclinometers of high measurement accuracy with an integrated 4...20mA signal conditioner for inclination measurement in the ranges of ±10, ±30 and ±80 degrees. The NG2I, NG3I and NG4I are capacitive and liquid based inclinometers with integrated sensor electronics and current amplifier. Electronic temperature compensation makes up for the temperature drift of the sensitivity of the primary transformer. An integrated, highly stable voltage regulator ensures stable operation for a range of supply voltages. The measurement technique provides a linear relationship between the angle to be measured (up to 80 degrees for the NG4I) and the output signal that is calibrated during manufacture. The measuring time constant can be matched to the requirements of the measurement task by appropriate hardware programming. The power is obtained from the measurement current loop, thereby eliminating the need for a separate power supply and enabling operation with two wire connection.

Application; The NG2I, NG3I and NG4I are suitable for applications requiring high measurement accuracy with high linearity and temperature stability as well as high long-term stability for measurement of large inclination angles and for which the power is to be supplied via a 4...20mA current loop without the need for a separate supply voltage. We recommend the sensor box SB1I with an integrated NG - inclinometer and a 4...20mA output signal for operation in especially harsh operating conditions. These inclinometers are typically used in construction, mining, vehicles, aircraft, ships, transportation and conveyor systems and process control as well as for safety engineering.

 Features

• Integrated sensor electronics including signal conditioner
• Temperature compensated, normalized 4...20mA output signal
• 2-wire connection - sensor power obtained from current loop
• Linear output characteristics
• High measurement accuracy
• Minimal linearity deviation
• High long-term stability
• Hysteresis free output signal
• No interference by ambient electromagnetic fields
• Shock proof as without moving mechanical parts
• Hermetically sealed
• Sensor electrically isolated from point of measurement - no ground connection
• Zero point adjustable through 360° using clamping ring
• Loop current limitation
• EMC certified

• Dual axis measurement from ±5°
• High resolution and accuracy
• Temperature compensated
• Dual 0-10V outputs and RS232 interface
• Robust corrosion resistant anodised Aluminium housing with IP67 sealing
• IP67 Sealed locking M9 connector
• Outputs isolated from supply (1500Vdc isolation)
• CE certified and RoHS compliant.

Additional Information:

• Delivery Time: 3 to 4 weeks

• Dual axis measurement from ±5°
• High resolution and accuracy
• Low temperature drift
• RS232 output interface
• Robust corrosion resistant anodised Aluminium housing with IP67 sealing
• IP67 Sealed locking M9 connector
• Outputs isolated from supply (1500Vdc isolation)
• CE certified and RoHS compliant.

Additional Information:

• Delivery Time: 3 TO 4 WEEKS

• Dual axis measurement range ±5°
• High resolution and accuracy
• Temperature compensated over -10 to 60°C
• RS232 interface
• Compatable with IDS and PDTS displays
• Tough sealed anodised aluminium housing (IP67)
• CE certified and RoHS compliant.
• Braided screen 4 core 3m PUR cable
• Small size, 75 x 37.5 x 15mm and light weight

Additional Information:

• Delivery Time: 3 TO 4 WEEKS

• Single axis measurement ±5°
• Low temperature drift
• RS485 output interface
• Robust corrosion resistant 316 Stainless Steel housing
• Sealed to IP67
• Excellent temperature stability
• Optional RS232 output
• CE certified
• Small size (70x49x18mm)

Additional Information:

• Item Code: RS485
• Delivery Time: 3 to 4 weeks

• Dual axis measurement range ±5°
• High resolution and accuracy
• Temperature compensated over -10 to 60°C
• RS485 interface with ModBus communication protocol
• Tough sealed anodised aluminium housing (IP67)
• CE certified and RoHS compliant.
• Braided screen 4 core 3m PUR cable
• Small size, 75 x 37.5 x 15mm and light weight

Additional Information:

• Production Capacity: 3 to weeks
• Delivery Time: 3 to 4 weeks