Smart Technologies

cynergy3 produce thousands of pressure sensors each year. They are used to measure pressure of a liquid or gas and provide the information as an electronic signal. We are proud to offer an extensive range in this field with the many customisable options leading to thousands of potential configurations to choose from!

We supply permanent and portable pressure sensors to the water industry, custom solutions for water pressure monitoring, industrial pressure sensors for use in paint spraying and injection moulding, sensors to monitor steam for medical sterilisers and even for sub-sea applications in submersibles and military submarines.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 2-4 weeks
• Packaging Details: fully safe packing

HFJ-1883074 is an analog proximity sensor with integrated electronics. The sensor uses an Eddy Current measurement principle to detect displacement of a non-magnetic target in proximity of the sensor front. Contactless measurement principle reduces wear and ensure longer lifetime. Factory calibration of the sensor ensures current output in the range of 4-16.25 mA representing 7 mm physical displacement of the non-magnetic target material. The calibration is performed using non-magnetic material SNCrW, but the sensor is also applicable to use with other non-magnetic materials such as NiCr20TiAl. Changing the non-magnetic target material will affect the output current range representing the 7 mm displacement, but not the Non-linearity.

General specifications

Output type Analog output current

Non-magnetic target materials SNCrW, NiCr20TiAl

Mechanical linear measurement range 7 mm ( see drawing for calibrated linear range)

Output polarity Direct Current- DC

Operating voltage range 16.8 – 31.2 VDC

Complete output range (current) 3.5 – 20.5 mADC

Maximum current consumption 50 mADC

Nominal ratings

Calibration target material SNCrW

Operating voltage 24 VDC

Linear output range (analog current output) 4 – 16.25 mADC (RL ≤ 400 W , CL < 1μF)

Temperature drift < ± 0.3mA within linear output range

Non-linearity < ± 0.3mA within linear output range

Output ripple PSRR < 1 μA/V up to 1 kHz

No-supply current < 50 mADC

Dynamic Characteristics (Response time) Increasing distance: 400μs to 700μs Decreasing distance: 300μs to 500μs

Reliability (Operating temperature 90°C with upper confidence level 90%)

MTTF > 1900000 hours

Expected lifetime > 200000 hours

Environmental conditions

Storage temperature -25 °C to 85 °C

Ambient temperature 0 °C to 110 °C

Electronics temperature 0 °C to 110 °C (operating temperature)

Sensor front temperature (sensing element) 0 °C to 150 °C (operating temperature)

Vibration (test specification MAN 3090801-4_1) 2-2000 Hz / 20g / 150 minutes per axis

Working pressure sensor front (sensing element) < 50 bar

Mechanical specifications

Cable type CL 105-2x2x0.75 – PO (flame retardent, halogen free)

Housing material Stainless steel (DIN 1.4305)

Sensor front material (sensing element) PEEK (Thermoplastic polymer)

Degree of protection IP67 with reference to IEC 60529

Mass 1.5 kg

Standards and directives

Marine type approval test IACS UR E10 rev 6, Oct. 2014

Electrical and electronic installation in ships- EMC IEC 60533:2015

Generic standards- immunity IEC 61000-6-2 + amendments

Generic standards- emisson IEC 61000-6-4 + amendments

Electromagnetic compatibility EMC Directive 2004/108/EC

Extended vibration test (product related) MAN 3090801-4_1 (engine mounted equipment)

Degrees of protection provided by enclosures (IP) IEC 60529 + amendment

Approvals and certificates

Marine approval certificate TA 62894/A0 EU-MR BV

HFJ-1883059 is an analog proximity sensor with integrated electronics. The sensor uses an Eddy Current measurement principle to detect displacement of a magnetic target in proximity of the sensor front. Contactless measurement principle reduces wear and ensure longer lifetime. Factory calibration of the sensor ensures current output in the range of 4-16.25 mA representing 7 mm physical displacement of the magnetic target material. The calibration is performed using magnetic material S19R, but the sensor is also applicable to use with other magnetic materials such as S45R and S35N2X. Changing the magnetic target material will affect the output current range representing the 7 mm displacement, but not the Non-linearity.

General specifications

Output type Analog output current

Magnetic target materials S19R, S45R, S35N2X

Mechanical linear measurement range 7 mm ( see drawing for calibrated linear range)

Output polarity Direct Current- DC

Operating voltage range 16.8 – 31.2 VDC

Complete output range (current) 3.5 – 20.5 mADC

Maximum current consumption 50 mADC

Nominal ratings

Calibration target material S19R

Operating voltage 24 VDC

Linear output range (analog current output) 4 – 16.25 mADC (RL ≤ 400 W , CL < 1μF)

Temperature drift < ± 0.3mA within linear output range

Non-linearity < ± 0.3mA within linear output range

Output ripple PSRR < 1 μA/V up to 1 kHz

No-supply current < 50 mADC

Dynamic Characteristics (Response time) Increasing distance: 400μs to 700μs Decreasing distance: 300μs to 500μs

Reliability (Operating temperature 90°C with upper confidence level 90%)

MTTF > 1900000 hours

Expected lifetime > 200000 hours

Environmental conditions

Storage temperature -25 °C to 85 °C

Ambient temperature 0 °C to 110 °C

Electronics temperature 0 °C to 110 °C (operating temperature)

Sensor front temperature (sensing element) 0 °C to 150 °C (operating temperature)

Vibration (test specification MAN 3090801-4_1) 2-2000 Hz / 20g / 150 minutes per axis

Working pressure sensor front (sensing element) < 50 bar

Mechanical specifications

Cable type CL 105-2x2x0.75 – PO (flame retardent, halogen free)

Housing material Stainless steel (DIN 1.4305)

Sensor front material (sensing element) PEEK (Thermoplastic polymer)

Degree of protection IP67 with reference to IEC 60529

Mass 1.5 kg

Standards and directives

Marine type approval test IACS UR E10 rev 6, Oct. 2014

Electrical and electronic installation in ships- EMC IEC 60533:2015

Generic standards- immunity IEC 61000-6-2 + amendments

Generic standards- emisson IEC 61000-6-4 + amendments

Electromagnetic compatibility EMC Directive 2004/108/EC

Extended vibration test (product related) MAN 3090801-4_1 (engine mounted equipment)

Degrees of protection provided by enclosures (IP) IEC 60529 + amendment

Approvals and certificates

Marine approval certificate TA 62894/A0 EU-MR BV

HFJ-1883072 is an analog proximity sensor with integrated electronics. The sensor uses an Eddy Current measurement principle to detect displacement of a non-magnetic target in proximity of the sensor front. Contactless measurement principle reduces wear and ensure longer lifetime. Factory calibration of the sensor ensures current output in the range of 4-16.25 mA representing 7 mm physical displacement of the non-magnetic target material. The calibration is performed using non-magnetic material SNCrW, but the sensor is also applicable to use with other non-magnetic materials such as NiCr20TiAl. Changing the non-magnetic target material will affect the output current range representing the 7 mm displacement, but not the Non-linearity.

General specifications

Output type Analog output current

Non-magnetic target materials SNCrW, NiCr20TiAl

Mechanical linear measurement range 7 mm ( see drawing for calibrated linear range)

Output polarity Direct Current- DC

Operating voltage range 16.8 – 31.2 VDC

Complete output range (current) 3.5 – 20.5 mADC

Maximum current consumption 50 Madc

Nominal ratings

Calibration target material SNCrW

Operating voltage 24 VDC

Linear output range (analog current output) 4 – 16.25 mADC (RL ≤ 400 W , CL < 1μF)

Temperature drift < ± 0.3mA within linear output range

Non-linearity < ± 0.3mA within linear output range

Output ripple PSRR < 1 μA/V up to 1 kHz

No-supply current < 50 mADC

Dynamic Characteristics (Response time) Increasing distance: 400μs to 700μs, Decreasing distance: 300μs to 500μs

Reliability (Operating temperature 90°C with upper confidence level 90%)

MTTF > 1900000 hours

Expected lifetime > 200000 hours

Environmental conditions

Storage temperature -25 °C to 85 °C

Ambient temperature 0 °C to 110 °C

Electronics temperature 0 °C to 110 °C (operating temperature)

Sensor front temperature (sensing element) 0 °C to 150 °C (operating temperature)

Vibration (test specification MAN 3090801-4_1) 2-2000 Hz / 20g / 150 minutes per axis

Working pressure sensor front (sensing element) < 50 bar

Mechanical specifications

Cable type CL 105-2x2x0.75 – PO (flame retardent, halogen free)

Housing material Stainless steel (DIN 1.4305)

Sensor front material (sensing element) PEEK (Thermoplastic polymer)

Degree of protection IP67 with reference to IEC 60529

Mass 1.5 kg

Standards and directives

Marine type approval test IACS UR E10 rev 6, Oct. 2014

Electrical and electronic installation in ships- EMC IEC 60533:2015

Generic standards- immunity IEC 61000-6-2 + amendments

Generic standards- emisson IEC 61000-6-4 + amendments

Electromagnetic compatibility EMC Directive 2004/108/EC

Extended vibration test (product related) MAN 3090801-4_1 (engine mounted equipment)

Degrees of protection provided by enclosures (IP) IEC 60529 + amendment

Approvals and certificates

HFJ-1883058 is an analog proximity sensor with integrated electronics. The sensor uses an Eddy Current measurement principle to detect displacement of a magnetic target in proximity of the sensor front. Contactless measurement principle reduces wear and ensure longer lifetime. Factory calibration of the sensor ensures current output in the range of 4-16.25 mA representing 7 mm physical displacement of the magnetic target material. The calibration is performed using magnetic material S19R, but the sensor is also applicable to use with other magnetic materials such as S45R and S35N2X. Changing the magnetic target material will affect the output current range representing the 7 mm displacement, but not the Non-linearity.

General specifications

Output type Analog output current

Magnetic target materials S19R, S45R, S35N2X

Mechanical linear measurement range 7 mm ( see drawing for calibrated linear range)

Output polarity Direct Current- DC

Operating voltage range 16.8 – 31.2 VDC

Complete output range (current) 3.5 – 20.5 mADC

Maximum current consumption 50 mADC

Nominal ratings

Calibration target material S19R

Operating voltage 24 VDC

Linear output range (analog current output) 4 – 16.25 mADC (RL ≤ 400 W , CL < 1μF)

Temperature drift < ± 0.3mA within linear output range

Non-linearity < ± 0.3mA within linear output range

Output ripple PSRR < 1 μA/V up to 1 kHz

No-supply current < 50 m_ADC

Dynamic Characteristics (Response time)Increasing distance: 400μs to 700μs

Decreasing distance: 300μs to 500μs

Reliability (Operating temperature 90°C with upper confidence level 90%) 

MTTF > 1900000 hours

Expected lifetime > 200000 hours

Environmental conditions

Storage temperature -25 °C to 85 °C

Ambient temperature 0 °C to 110 °C

Electronics temperature 0 °C to 110 °C (operating temperature)

Sensor front temperature (sensing element) 0 °C to 150 °C (operating temperature)

Vibration (test specification MAN 3090801-4_1) 2-2000 Hz / 20g / 150 minutes per axis

Working pressure sensor front (sensing element) < 50 bar

Mechanical specifications

Cable type CL 105-2x2x0.75 – PO (flame retardent, halogen free)

Housing material Stainless steel (DIN 1.4305)

Sensor front material (sensing element) PEEK (Thermoplastic polymer)

Degree of protection IP67 with reference to IEC 60529

Mass 1.5 kg

Standards and directives

Marine type approval test IACS UR E10 rev 6, Oct. 2014

Electrical and electronic installation in ships- EMC IEC 60533:2015

Generic standards- immunity IEC 61000-6-2 + amendments

Generic standards- emisson IEC 61000-6-4 + amendments

Electromagnetic compatibility EMC Directive 2004/108/EC

Extended vibration test (product related) MAN 3090801-4_1 (engine mounted equipment)

Degrees of protection provided by enclosures (IP) IEC 60529 + amendment

Approvals and certificates

Marine approval certificate TA 62894/A0 EU-MR BV

GYPD is a magnetostrictive cylinder sensor with integrated electronics it’s compact and suitable for small hydraulic cylinders or other applications where a small size is important.

Measuring stroke between 30 and 100 mm with a wide range of analog output signals and PWM output, with sampling frequency up to 4 kHz. GYPD are available with different compact magnets and has a small installation footprint.

Magnetostriction is a non-contact sensor technology with high measuring accuracy and excellent life-time. Read more about the technology on our know-how page: Magnetostrictive sensor technology

Additional Information:

• Item Code: GYPD
• Production Capacity: 8-36 VDC (< 0.8W)
• Delivery Time: 3 TO 4 WEEKS

GYPS is a magnetostrictive cylinder sensor with integrated electronics and a diameter 48 mm header, it’s compact and compatible with many hydraulic cylinders within mobile hydraulics and more.

Measuring stroke between 30 and 2400 mm with a wide range of analog output signals and PWM output. GYPS are available with different compact magnets and has a small installation footprint.

Magnetostriction is a non-contact sensor technology with high measuring accuracy and excellent life-time.

Additional Information:

• Item Code: GYPS
• Production Capacity: 8-36 VDC (< 0.8W)
• Delivery Time: 3 TO 4 WEEKS

• Excellent immunity to false triggering by water spray, oils, and other foreign materials
• Latching versions start up not activated and toggle between activated and not activated on successive touches 
• Terminal connection models available for panel wiring applications
• Rated IEC IP67 and IP69K 
• Can be actuated with bare hands or gloves; adjustable sensitivity 
• IO-Link models give full access to color, flashing, rotating, and dimming settings as well as advanced animations such as dynamic sequence mode and LED control
• Output settings, including on and off delays, output function, and output state are also available with IO-Link
• PICK-IQ™ models provide faster response speed and simplified programming to Modbus RTU communication

Additional Information:

• Production Capacity: 12 V DC to 30 V DC
• Delivery Time: 3 WEKS