SM Engineering Works

• Standards: IS 1208-1058, ASTM D 113, IP32, 55, AASHTO T 51
• Specification: Designed to test three specimens simultaneously. The machine consists of a carriage moving over a lead screw. An electric motor driven reduction gear unit ensures smooth constant speed and continuous operation. The entire assembly is mounted with a stainless steel lined water bath completely encased in metal bound hardwood. It is equipped with an electric pump circulator and heater. The temperature is controlled thermostatically. Two rates of travel i.e. 50 mm/min and 10 mm/min are provided. Suitable for operation on 230 V, 50 Hz, Single Phase, A.C. supply.

Complete With:

• Ductility Mould, with Base Plate 3 Nos.
• Thermometer IP 38° C, Range: 23° C to 27° C

Standards: ASTM: D 1559 T- 62. BS 598-107

Specification: Marshall Apparatus Consists Of:

• Robust construction
• 50KN capacity
• Rate of travel 50.8mm/min
• Safety cut-off switch

It consists of body housing, a geared screw jack and motor drive mechanism suitable for operation on 230 V, 50Hz, Single Phase, A.C. supply.

• MARSHALL LOAD FRAME 1 No.
• Breaking Head Stability Mould, with a dial gauge ( having 25mm travel and 0.01mm least count), for flow measurement 1 No.
• Compaction Mould, Steel cylindrical 3 Nos.
• Base Plate 3 Nos.
• Extension Collar 3 Nos.
• Compaction Pedestal, Manual Operation, Comprising a steel plate capped on a wooden post. A Mould Clamp is fitted to the top of the plate . 1 No.
• Compaction Hammer, satisfies BS 598. The hammer has a 4535 g sliding weight with a free fall of 457 mm 2 Nos.
• Load Transfer Bar 1 No.
• Paper Discs, Non absorbent, 11 cm diameter pack of 100 No. 1 Pkt.

.

• Standards: ASTM D2172 AASHTO T-58, T-164

  Specification: Centrifuge Extractor, Electrical Operation, Capacity 1500g, with a Dimmer stat for speed control from 2,400 to 3,600 rpm. Suitable for operation on 230 V, 50 Hz, Single Phase, A.C. supply.

• Standards: ASTM D5, BS 2000
• Specification: It consists of a vertical pillar mounted on a base provided with leveling screws. The head, together with dial plunger rod a cone (or needle) slides on a pillar and can be clamped at any desired height. A rack and pinion and pointer assemble provides fine adjustment of needle or cone tip to sample. It incorporates a clutch mechanism. Which makes reading of penetration and subsequent resetting a simple and accurate operation. The dial is graduated in 400 1/10 and the millimeter subdivisions and the needle pointer against figures makes easy reading. Supplied with a bitumen penetration needle, ring weight one each 50 gms. and 100 gms. two sample containers.
• Accessories:Penetration cone for empirical estimation of penetration of lubricating grease, petroleum jelly etc.

• Standards: IS 310, 1203, 1448, IP 60, 49, 50 ASTM D5, 217, D637, BS 2000-49
• Specification: Same as standard penetrometer but the unit is compact with timer to control duration of penetration. The instrument is provided with lead screw gear arrangement, Leveling screws, Spirit level and a digital preset timer

Product description:

• SE-Test India manufactures high quality metallic cube moulds for testing and analysis of the specimens for the parameters of strength, compaction and others. We make very precise moulds as per the demands of construction engineers and laboratories catering the civil engineering verticals. The moulds are made as per the Indian and British standards and conform to all the desirable dimensional characteristics sought for accurate testing. The metallic cube moulds of SE-Test India are developed with the best grade steel and cast iron material to ensure highest quality and finishing of them. Durability is also maximized due to non corrosive and rust resistant nature of the cube moulds.

Product Specifications –

Find out the objective specifications of our cube moulds here below –

• Metric sized cube moulds are available with machined flat surfaces and +/- 0.2 mm accuracy attributes while finishing is within 0.2 mm
• Inch sized cube moulds are offered as machined flat with +/- 0.01 inch accuracy and with 0.01 inch finish
• The metal moulds are delivered complete with their base plate of metal together with the fasteners, clamps and springs
• Our metal cube moulds are made as per the industry requirements and are used for high level testing of specimens towards ensuring core stability and strength of structures and buildings.
• A Cast Iron Mortar Cube Mould 50mm, Single Gang
• Cast Iron Mortar Cube Mould 50mm, Three Gang
• Mild Steel Cement Cube Mould 70.6mm, with Loose Base Plate
• Cast Iron Concrete Mould 75mm Single Gang
• Cast Iron Concrete Mould 100mm Light Weight
• Cast Iron Concrete Mould 100mm Clamp Type (8.5 KG) Four Part
• Cast Iron Concrete Mould 150mm Light Weight 8KG
• Cast Iron Concrete Mould 150mm ISI Marked
• Cast Iron Concrete Mould 150mm Clamp Type (18 KG) Four Part
• Cast Iron Concrete Mould 150mm Clamp Type (16 KG) Two Part
• Plastic Mould 150mm

Product description:

• We offer a wide range of very high-quality Bitumen Extractor at a very affordable price.

• Available in different size
• Long life
• Breakage free
• Consists of precision machine rotor bowl and bowl cover housed in a cylindrical aluminum box

Specification:

• Rugged construction to withstand hard work
• Fully automatic and easy to operate
• Uniform compaction
• Automatic Preset Blow Counter

The Automatic Compactor eliminates the laborious process of manual compaction and an even degree of compaction is achieved. The driven mechanism lifts the weight of 4.5kg and drops it through a correct height of 457 mm. The rammer foot is removable, which facilitates preheating. A compaction pedestal with specimen holder is fixed to the base. An Automatic Blow counter enables the number of blows to be present before each test and automatically stops the machine on completion. Suitable for operation on 230 V, 50 Hz, Single Phase, A.C. supply.

Note: Also available for modified compaction test (10.2 Kg.)

• Standards: AASHTO T 256
• Specification: Lightweight Aluminum construction

• Ease of Transportation
• Unique Telescopic Design Simplifying Field set up
• Compact, Thereby reducing the amount of storage space needed

Benkelman Beam utilizes the technique of using balanced beam in conjunction with a suitable vehicle to measure road flexure The improved Benkelman Beam is a convenient, accurate device for measuring the deflection of flexible pavements under moving wheel loads. Operating on a simple lever arm principle, the unit consists. Supplied with carrying case.

Note: Benkelman Beam with Digital Dial Gauge also available at an extra cost

Additional Information:

• Item Code: SMEW-0150

Product description:

• Aluminium alloy made, with dial indicator and accessories, it is utilized tomeasure the deflection of the road surface when loaded by the wheels ofvehicles. The beam is put in contact with the pavement under test between thetires of the vehicle. The measurement of the deflection is performed when thevehicle passes over the test area. Length of the Benkelman beam is 250 cm.Beam fulcrum ratio 4:1 Supplied with wooden carrying case.

• The standard accessories as mentioned in the mechanical version form part of the supply for this version also.
• The machine is supplied complete with the following Standard Accessories :

• Clamping jaws for testing Round and Flat specimens under Tension Tests.
• A pair of Compression Platens, duly hardened ground and polished, with the bottom platen provided with guide- lines for placing the test specimen co-axial with the Hydraulic RAM.
• A table with adjustable rollers complete with mandrel for conducting Bending/Transverse Tests. Detailed specifications of the machine is per our leaflet enclosed.