SM Engineering Works

Product Description: We are specialized in the Manufacturing and Supplying of Cylindrical Mould. The Cylindrical Mould is used for testing concrete cylinders for compressive strength tests. The Cylindrical Mould can be availed at market leading prices from us.

Product Specifications -

• The mould is made as split type with two equal segments that can be combined accurately
• Base plate and top plate are offered together with cylinder. Fasteners are also provided
• Base plate and top plate are machined flat to +/- 0.03 mm
• Mean diameter (internal) of the moulds is within the accuracy range of +/- 0.2 mm
• Height of the metal cylindrical mould is within accuracy range of +/- 1 mm
• Mould cylinder, cast iron, 150mm dia. x 150mm height.
• Mould cylinder, cast iron, 150mm dia. x 300mm height.
• Mould cylinder, cast iron, 160mm dia. x 320mm height.
• Mould cylinder, cast iron, 100mm dia. x 200mm height.
• Mould cylinder, cast iron, 300mm dia. x 600mm height.

Product Description:

• Specification: The concrete permeability apparatus comprises of a mild steel cell of Square/Round cross-section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and T-connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. The cell assembly consists of one base plate and one top plate connected to nozzles.
• Note: The pressure chamber is fitted with a pressure regulator which helps in regulating the pressure from 0-15kg/cm sq. Gauge is for indicating the pressure in the cell. A foot pump and a pressure tube is supplied to develop pressure in the chamber. The apparatus is supplied with a measuring cylinder 500cc to measure percolated quantity to water.
• Pressure can also be applied; by a pressure air line or by a compressor (2 HP capacity), can be supplied at an extra cost.
• Model available for 3,6, 9, 12, 18 cells permeability also.

Product details:

• Standards: IS 516, BS 1881
• Specification: In these load frames “C” channels are used, they are welded at the top as well as bottom and with stand high loads. A hydraulic jack is fitted at centre of the base of the load frame, over which can be fitted lower platen and spacer block with the help of centering pin. A lead screw passes through the top of the frame. To the lower end of this lead screw is fixed the upper platen with spherical seat for self alignment. The platens are accurately machined, hardened and polished. The lower platen grooves to correctly place the specimen. The ram dia of the machine varies from the requirements of the customer. The lower pattern are at the base of the frame above the ram and it is rectangular in shape. Sufficient clearance is provided between the platens to fit in the cylindrical/ cube moulds. Spacer provided to adjust cubes and cylinders. A 20 cm dia. pressure gauge with maximum load induction pointer is fitted on the top panel and in turn is connected to the hydraulic pressure pipe. On the right hand a console is fitted within which the electrical motor is fitted along with its coupling which in turn is connected to the pumping unit. A slow / fast loading rate regulator fixed on the top of the console for adjusting the rate of loading. The machine is duly calibrated and passed after inspecting and analyzing it with a compression level indicator is provided as a dip stick.
• Note: The platens are normally rectangular on shape, but on special request square platens or circular platens can be supplied at an extra cost.

Optional:

• Ranges: 50 kN to 3000 kN
• Extra gauges can be attached to the machine (max. 3 nos. ), for better accuracy and results.
• Electrical connection can either be Single Phase on 220 V A.C., or 3 Phase 440 V A.C.

Product Description:

• SE-Test India manufactures cylindrical moulds of metal for specimen testing and analyses of concrete columns. We make cylindrical moulds in standard sizes that are widely used by the civil engineering labs in India and world for testing the compression, linearity, stability and other essential attributes of concrete columns. The moulds are delivered high quality finish at its inner surface to ensure that best specimens are derived without any imperfection. Our cylindrical mould (Model SET 1119) is developed with high grade steel and cast iron material that offer strength and durability, especially the rust and corrosion resistance. The dimensional make of the moulds is such that deformation is negligible even after continued and regular use of them.

Product Specifications -

Find the objective specifications of metal cylindrical moulds of SE-Test India here below –

• The mould is made as split type with two equal segments that can be combined accurately
• Base plate and top plate are offered together with cylinder. Fasteners are also provided
• Base plate and top plate are machined flat to +/- 0.03 mm
• Mean diameter (internal) of the moulds is within the accuracy range of +/- 0.2 mm
• Height of the metal cylindrical mould is within accuracy range of +/- 1 mm

Cylindrical moulds of SE-Test India are made with highest precision & these serve well the demands of engineers and technicians. Our moulds can be used easily on site to make the specimens.

• Mould cylinder, cast iron, 150mm dia. x 150mm height.
• Mould cylinder, cast iron, 150mm dia. x 300mm height.
• Mould cylinder, cast iron, 160mm dia. x 320mm height.
• Mould cylinder, cast iron, 100mm dia. x 200mm height.
• Mould cylinder, cast iron, 300mm dia. x 600mm height.

Product Description:

• S M Engineering Works manufactures concrete pan mixer machine for laboratories that can use it for developing highly consistent mixtures. The machine has been developed as per the standard requirements of the construction testing labs and precise assessment demands of engineers and technicians. It is useful for making concrete cube moulds for testing different parameters relating to stability and strength. Our  model laboratory concrete pan mixer has been developed as a simple machine that delivers highly uniform mixes for making cubes of different dimensions. The consistency of the mix matches the standards of labs and also the international concrete testing protocols as adopted by the certification agencies in India and the world.

Laboratory Concrete Pan Mixer Machine Product specifications -

• The machine is designed as a metallic body with mixing function that is performed by the paddles present inside the drum
• The machine is suitable for mixing small quantities for lab purposes; it offers both wet and dry mixing of concrete and other materials.
•  It can be used to mix materials with maximum aggregate size of 20 mm.
• The machine has wheels attached at its base that allow it to be moved easily ‘on site’
• Ease of accessing the mixture and also emptying after the task is done.
• Our laboratory concrete pan mixer machine has been developed with industrial grade SS and fitted with highly durable and rust proof functional components that make it much durable and effective.

• Specification: It is designed to carry a load of 140 kg . The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top. The table top is 500 x 500 mm and has stops along its edges to prevent moulds from walking off the table during vibration. A crass arm adjustable on a vertical rod at the centre of the table is provided to hold the moulds while operating the between a maximum of 3600 vibrations down to 2600 vibration per minute. A speed regulation handle is provided for increasing or decreasing frequency. A switch is provided for starting the motor. Suitable for operator on 230 Volts, A.C. Single Phase, 50 Cycles.
• Note: Table top size : 750 x 750 mm & 1000 x 1000 mm also available at an extra cost. Both models operates on 440 volts, A.C. Three Phase

• Standards: IS 516, BS 1881
• Specification: The Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The Digital Indicator incorporates a 4-Digits display calibrated in Kilo Newton (KN) and preset to maximum load capacity fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge, avoiding any over loading. Relays are incorporated so that the motor does not restart on its own after a power breakdown. The electrically operated pumping units are provided with a control knob to adjust the pace rate which can be effectively controlled by an experienced operator during the course of testing, by observing the progress of the Digital Indicator readings.

Optional:

• Ranges: 50 kN to 3000 kN
• Channel and Pillar Type Both Are Available.
• Extra gauges can be attached to the machine (max. 1 nos. )
• Electrical connection can either be Single Phase on 220 V A.C., or 3 Phase 440 V A.C.

• Standards: IS 7320 & BS 1881-102
• Specification: SE-Test India manufactures slump test apparatus for gauging the consistency of concrete mixes. Slump test is really important to find out the characteristics of freshly mixed concrete and needs to be performed without fail. Our apparatus conforms to the international standards and industry best practices and allows engineers and technicians to assess the concrete properties relating to cohesion and mixing consistency ‘on site’ in least of time. Every batch of concrete can be checked easily without any lags thus saving the project timelines.

Slump Test Apparatus Product specifications –

• The apparatus can be used for concrete mixes with maximum aggregate size of 38 mm.
• There is a slump cone made of steel. Its lower base diameter is 200 mm while at the top, it has diameter of 100 mm. Height is 300 mm.
• Foot pieces can be fixed to the clamps provided at the base plate. A lifting handle is also attached with the base plate for easy handling
• A 600 mm long and 16 mm wide graduated steel rod is provided as part of the apparatus.
• Slump test apparatus of SE-test India is developed as per standards IS 7320 and BS 1881 – 102.
• Our apparatus is of very simple make yet it has been developed through the use of best quality materials including high tensile steel that is rust proof. Thus the apparatus delivers without any deformity or lack of accuracy for years.

• Standards: IS 3085, DIN 1048
• Specification: The concrete permeability apparatus comprises of a mild steel cell of Square/Round cross-section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and T-connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. The cell assembly consists of one base plate and one top plate connected to nozzles.
• Note: The pressure chamber is fitted with a pressure regulator which helps in regulating the pressure from 0-15kg/cm sq. Gauge is for indicating the pressure in the cell. A foot pump and a pressure tube is supplied to develop pressure in the chamber. The apparatus is supplied with a measuring cylinder 500cc to measure percolated quantity to water.
• Pressure can also be applied; by a pressure air line or by a compressor (2 HP capacity), can be supplied at an extra cost.
• Model available for 6, 9, 12, 18 cells permeability also.

Product Description:

• Specification: The Laboratory Concrete Mixer is used for preparing Mix Design of Concrete. It consists of a steel vessel of 55/ 110 Litres capacity, mounted on a frame. The vessel is rotated at 20-22 RPM with the help of a motor and a pulley arrangement. The vessel of laboratory concrete mixer can be titled to any angle by a hand wheel and counter weight. This facilitates mixing and discharge. Blades are provided inside the vessel to mix the material thoroughly. The large pulley wheel facilitates manual rotation of the drum during power failure. The drum, pulley wheel, and motor are mounted on a steel frame in these laboratory concrete mixer. The concrete mixer is fitted with ½ HP motor. Suitable for Operation on 220V, Single Phase, 50Hz, AC Supply

Product description:

• We are offering wide range of Concrete Compression Testing Equipment. These machines are durable and easy to use. These testing machines yield accurate results and can function non stop for hours. Capable of withstanding high pressure, these cement, concrete and soil testing machines are largely used by clients in the construction industry.

• Standards: IS 1199 1959 & BS 1881-106
• Specification: The apparatus consists of a pressure tight flanged cylindrical measuring bowl. The bowl is fitted with a removable flanged conical cover assembly with the help of a seal. The conical cover has an air valve and a petcock for bleeding off the water. A transparent cylindrical stand pipe which is graduated in air content is fixed to the conical cover assembly. Pressure is applied to the specimen with the help of a pressure bulb and the pressure is recorded on the pressure gauge which is mounted on the stand pipe. The whole assembly is mounted on a flat base. The instrument is supplied complete with one each following accessories.
• Calibration cylinder with spring clamp, trowel, tamping rod, straight edge. Rubber mallet and measure.

Capacity Are also Available

• Bowl Capacity: 0.005 cubic meter
• Bowl Capacity: 0.007 cubic meter
• Bowl Capacity: 0.01 cubic meter
• Bowl Capacity: 0.01 cubic meter

Additional Information:

• Item Code: SMEW-0084

• Standards: IS 1199 & BS EN 12350
• Specification: The instrument is used for workability as well as consistency of fresh concrete. A slump Cone and a graduated rod supplied with the instrument helps the operator to find out slump values and vibration table with container and acrylic disc is used to find out workability of concrete expressed in Vee Bee degrees, which is defined as the time in seconds to complete required vibrating at which the fresh concrete flows out sufficiently to come in contract of the entire face of acrylic disc.
• The equipment consists of : A vibrating table size 380 mm long and 260 mm wide, resting upon elastic support at a height of about 305 mm above the floor, complete with Start/Stop switch, cord and plug. A holder is fixed to the base in to which a swivel arm is telescoped with funnel and guide swivel arm is also detachable from the vibrating table. The divisions of scale on the rod record the slump of the concrete in millimeters. Supplied complete with a sheet metal container with lifting handles which can easily be fixed to the vibrating table. A slump cone open at both ends with lifting handles and a tamping rod of size 16 mm dia. and 600 mm long rounded at both ends.

Product Description:

• Standards: IS 1199, 5515. & BS 1881-103
• Specification: SE-Test India manufactures compaction factor apparatus that has been designed as per the international standards and requirements of construction industry. The apparatus allows determining the workability of different types of concrete mixes by assessing the compaction ratio. Having a simple set up, the compaction factor apparatus performs stably and is guaranteed for high durability. It can be used ‘on site’ and the workability of the concrete mix could be easily determined in less of time.

Compaction Factor Apparatus Product specifications: Compaction factor apparatus from SE-Test India has the following specifications

• The apparatus is made as a rigid metallic frame that has two conical hoppers and one cylinder at its base
• The conical hoppers have hinged trapdoors with quick release catchers at the lower end
• The cylinder top is covered with a circular metal plate
• A plaster trowel and a metal rod rounded at both ends (600 mm in length and 16 mm in diameter) is also provided
• Our compaction factor apparatus has been developed with the best quality materials like stainless steel and delivered appropriate finishing and dimensional accuracy to ensure precise results for the engineers and technicians. The compaction factor apparatus conforms to the standards IS 1199 and 5515 and BS 1881 – 103.

Product description:

Specification: We are providers of Vibratory Hammers, which is a specialized equipment used consistently at construction sites. The Vibratory Hammer is electrically operated. Our Vibratory Hammer has several uses. Some of them are listed below. Specifications Used for changing the soil formation with the use of its vibration Used for driving hammers into heavy or hard piles Used for the compaction of concrete cubes of 150mm & 100mm.

Additional Information:

• Item Code: SMEW-0062