S. P. Engineers

S.P. Engineers is a Special Solid Metal Gasket manufacturer that supply metallic gasket with any specification and size As per Customer Conditions to all industry.

Solid Metal gaskets are utilized in applications where temperatures and pressures rule out the usage of traditional gasket materials. As usual, gasket compression parts need to be important to deform the gasket, and the metal worked for the gasket should be softer than the metal in the mating surfaces.

S. P. Engineers offer provides Kammprofile Gaskets that are of exceptional reliability in difficult applications. Kammprofile gaskets (also known as Kammprofile gaskets, Camprofile gaskets, or Grooved gaskets) are gaskets with a metal core attached to both sides with a soft filler substance. The soft non-metallic filler is put into the metal core serrated grooves after the Kammprofile gasket material is installed.

Kammprofile gaskets are made out of a metal core (usually stainless steel) with concentric grooves on both sides that are filled with sealing materials. Graphite, PTFE (Teflon), CAF, or Metal can be used as sealing layers, depending on the service duty (e.g Aluminium or Silver). Without sealing layers, Kammprofile can produce a great seal, but there is a possibility of flange surface damage.

The Kammprofile gasket has a very large seating stress range (lowest to maximum stress).

• Highly suitable for varying temperatures and pressures.

• Due to inaccurate bolt tensioning, it is Less sensitive to assembly faults

• Suitable for light and heavily constructed flanges.

• Kammprofile gasket materials depend on up to 1000 0C temperatures.

• Repellent up to 250 bar media pressures.

The additional benefits are

• The layer thickness of the sealing material is exceptionally thin (0.5mm) when built, which reduces leaks, reject rates, and pollutants.

• The gasket is easy to remove and will not damage the flange surface.

• Lowers the expense of maintenance.

• Damaged flanges are temporarily sealed with 1mm thick sealing layers until they can be rebuilt.

• Face protection with flanges Even under strong seating loads, Kammprofiles will not harm the flange faces.

• When temperatures and pressures change, this product performs exceptionally well.

• Existing gaskets can be directly replaced. There is no need for a particular flange finish.

• Environmentally friendly since leakage into the atmosphere is considerably reduced.

Metal Jacketed Gaskets comprises an outer shell with a compressed fiber filler of metallic/non-metallic. With this filler material, the gasket gains resilience. However, the metal jacket preserves the temperatures, filler, resists pressures, and corrosion.

Metal jacketed gaskets are manufactured at S. P. Engineers. These Metal Jacketed Gaskets or double jacketed gaskets have used as heat exchanger gaskets, used in pumps, valves, etc. Gasket sealing is useful under smooth flange surface finish, high bolt loads, and flange flatness.