Spectracore Technologies

FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver. It is a great entry-level radio for those just starting in the field of drones flying.Above all, you get a slim, modern radio transmitter that fits nicely in your hands and weighs just under 400 gm. It won't test your arm stamina on those long flights. This radio is also really practical with a 3-position switch. It has two adjustable knobs for flight modes/ multiple flap positions.You will get the new FS-iA6B receiver with this kit. This is a compact 6-channel receiver with a range exceeding 500m in addition; it comes with a dual antenna for excellent reception and interference rejection capabilities.

Additional Information:

• Production Capacity: 50

This is an all-new Quadcopter frame. The S500 Carbon Fiber Quadcopter Drone Frame Kit comes with landing gear, suitable for any quadcopter builds. This kit is easy to assemble.

This S500 Quadcopter Frame is made from Glass Fiber which makes it tough and durable. They have the arms of ultra-durable Polyamide-Nylon which are the stronger molded arms having a very good thickness so no more arm breakage at the motor mounts on a hard landing. The arms have support ridges on them, which improves stability and provides faster forward flight.

The S500 has a strong, light, and a sensible configuration including a PCB(Printed Circuit Board) with which you can directly solder your ESC‘s to the Quadcopter. So, making the Quadcopter build fast and easy. So, it avoids the use of extra PDB(Power Distribution Board) and makes the mounting clean and neat. The S500 Quadcopter Frame is highly flexible frame during mounting of various components like flight controller, battery, etc.

1. Made by advanced engineering material, super strong & smooth
2. Easy to assemble and disassemble.
3. The frame is tough and durable.
4. The main glass fiber frame has good strength.
5. The arm equips support ridges for better and faster forward flight.
6. Features pre-threaded brass sleeves.
7. Large mounting tabs for camera mounting.
8. In-built power distribution board.

1 x S500 Carbon Fiber Quadcopter Drone Frame Kit

Additional Information:

• Packaging Details: Standard

Additional Information:

• Packaging Details: Standard

The SpeedyBee F405 V4 BLS 60A 30×30 FC&ESC Stack is a high-performance flight controller and electronic speed controller (ESC) combination designed for advanced FPV racing and freestyle drones.

Note: For more technical Details go through Datasheet in the attachment section 

1. Flight Controller (FC) Features:
   1. Processor: F405 chip for high-speed processing.
   2. Firmware Compatibility: Supports Betaflight, INAV, and other popular firmware.
   3. Integrated OSD: On-Screen Display for real-time telemetry data.
   4. Built-in Gyroscope: High-performance IMU for precise flight stability.
   5. Multiple UART Ports: For connecting various peripherals like receivers and GPS.
2. Electronic Speed Controller (ESC) Features:

• 1. Current Rating: 60A continuous current for robust motor performance.
  2. BLHeli_32 Support: Advanced ESC features, including bidirectional DSHOT and telemetry.
  3. Wide Voltage Range: Supports 3-6S LiPo batteries for flexibility in setups.
  4. Smooth Control: Provides precise throttle response and control.

1. Stack Specifications:
   1. Size: 30x30mm, compatible with standard FPV frames.
   2. Compact Design: Lightweight and optimized for racing and freestyle drones.
   3. Good Heat Dissipation: Ensures stable performance during intense flights.
2. Additional Features:

• 1. Buzzer and LED Support: For alerts and status indications.
  2. Configurable Settings: Customizable via software for individual pilot preferences.

1 x SpeedyBee F405 V4 BLS 60A 30×30 FC&ESC Stack

Additional Information:

• Production Capacity: 100 per month
• Packaging Details: Standard

5inch FPV 3S Drone DIY Kit with the Radiolink Crossflight Racing Drone Kit
The Radiolink Crossflight Racing Drone Kit will improve your drone racing experience. This comprehensive kit ensures you're prepared to take to the skies in style and speed by providing you with everything you need to create your very own high-performance racing drone.
The ZMR / QAV250 V2 Carbon Fiber Frame, famous for its strength and lightweight construction, serves as the kit's central component. This frame is made from premium carbon fiber and offers the optimal balance of strength and agility, making it suitable for racing through tight turns and negotiating difficult obstacles.
With the FlySky FS-i6 transmitter that is part of this kit, you will always have perfect control over your drone. With its cutting-edge capabilities and ergonomic design, you can fine-tune your drone's flight characteristics to give you the competitive edge you need on the racetrack.
Unleash the Power: This kit's Readytosky 2205 2300KV Brushless Motors produce breathtaking acceleration and breakneck speed. Because these motors are designed to withstand the rigors of competitive racing, you can rely on your drone to react quickly to your directions and move you ahead of the field.Use the Radiolink Crossflight Racing Drone Kit to unleash your inner racer. Prepare to rule the skies!
Features:
ZMR / QAV250 V2 Carbon Fiber Frame for durability and agility.FlySky FS-i6 transmitter for precise control.Readytosky 2205 2300KV Brushless Motors for speed and acceleration.5045 3-Blade Propellers for optimal thrust and stability.Comprehensive kit for a complete racing drone setup.Ideal for both beginners and experienced racers.High-quality components for reliable performance.The perfect blend of power and control for thrilling races.Package Includes :
1 x ZMR / QAV250 V2 Carbon Fiber Frame
1 x T10 Transmitter with FPV Camera and reciever
4 x BLHeli LittleBee 30A ESC
4 x Readytosky 2205 2300KV Brushless Motors ( 2 CW – 2 CCW )
4 x 5045 3-Blade Propellers
1 x Radiolink crossflight Flight Controller
1 x Readytosky 20cm Nylon Strap Belt for RC Lipo Battery
1 x Shock Absorber Set
1 x 2200mah / 5200mah Battery

Additional Information:

• Packaging Details: Standard

Hobbywing XRotor 40A APAC Brushless ESC 2-6S for RC multicopters.Using Multicopter special program, fast throttle response surpasses all kinds of open source software; Firmware is optimized specifically for disc motor, and it has very good compatibility. The ESC is highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing) easy to use.

The throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper so that a more stable flight; Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers.

1. Using a Multintegrated circuitopter special program, fast throttle response surpasses all kinds of open source software.
2. Firmware was optimized to specify integrated circuitously for disc motor, and it has very good compatibility.
3. Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing, easy to use.
4. A throttle signal line is a twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight.
5. Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signals)
6. Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.
7. Ultra-low resistance MOSFET, strong flow capacity.

1 x Hobbywing Xrotor 40A ESC for DIY Multicopter Drone

Features

1. Faster H7 SOC with 1MB ram.
2. Upgraded triple redundant IMU sensors for extra redundancy.
3. Two sets of IMU are vibration-isolated mechanically, reducing the effect of frame vibration to state estimation.
4. IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs.
5. The entire flight management unit(FMU) and inertial management unit(IMU) are housed in a reatively small form factor (a cube).
6. Fully Cubepilot carrierboard compatible, all inputs and outputs go through a 80-pin DF17 connector, allowing a plug-in solution for manufacturers of commercial systems. 
7. Manufacturers can design their own carrier boards to suit their specific needs now and in the future.The Cube Orange is a leap forward in technology compared to the Cube black. It uses the new STM32H7 chip, which is 4 times faster than the SMT32F4 in the Black Cube. Also, some sensors in the Cube Orange are much better than those in Cube Black. Cube orange can only be used with APM firmware, although the Cube black can be used with both APM and PX4 firmware.

Additional Information:

• Packaging Details: Standard

Highly integrated, small and exquisite.
K++Pro combines the advantages of classic flight control K++ algorithm and redundant redundant control system, and integrates RTK, power module and 4G network module. It is small in size, large in function and easy to install, which greatly improves the production efficiency and the convenience of after-sales service.
Small size but powerful
 
The volume parameters of K++Pro are: , small in size. In line with the trend of modular design, it is convenient for installation, and at the same time makes it easy to troubleshoot after-sales. Manufacturers can realize remote after-sales and reduce the cost of after-sales.
Precise Control
The flight accuracy of the route is increased by 25%.
The vertical control accuracy is increased by 20%.
 
The trajectory is more precise and the flight is smoother.
Strong Shock Resistance
Double shock-absorbing structure design to cope with various complex vibration effects.
 
The frame has strong anti-aging ability and reduces after-sales maintenance investment.
Multi-redundant Backup
Triple redundant IMU.
Dual redundant barometers.
 
More safety !
Noise Reduction and Power Saving
Motor noise is 3 times smaller than the previous generation.
Power saving 5%~15%.
 
Much less flying noise.
No Calibration-
Industrial grade sensor.
 
IMU is calibrated just once and used for a lifetime.
Attitude Control-
Attitude control stability doubled.
 
Much better wind resistance.
Dual CPU-
More powerful processing.
 
Support up to 1000Hz ESC control.
Backup Power-
The controller supports a backup power port.
 
 
More reliable power supply.

Additional Information:

• Packaging Details: Standard

The XRotor X6 brushless power system is a power system capable of carrying a load of 3~5kg (per axis) for agricultural drones. It can provide a thrust of up to 11.9kg and match 28/30mm carbon fiber tube arms. It’s waterproof and dustproof to IPX7 standard and resistant to rainwater, pesticides, salt spray, sand, dust, mud, sandy soil, high temperature, and impact. Hobbywing XRotor X6 Plus also features the algorithm used for optimizing the FOC ESC & motor system and making the system more balanced, multiple protections like power-on self-detection, power-on abnormal voltage, over-current, and motor lock-up, and the real-time data output function.

Note: Product Images are shown for illustrative purposes only and may differ from the actual product.

Note: For more technical details go through Datasheet in the attachment section.

1. Simple and convenient: Simple assembly, easy to install and disassemble.
2. Quality craftsmanship: The shell of this product adopts quality craftsmanship with exquisite workmanship, which is a perfect accessory for your RC toy.
3. Strong stability: The motor adopts a new design with high endurance, stable connection, and strong stability.
4. Very stable: The motor is extremely stable and will work with less impact.

1  x Hobbywing XRotor X6 Plus Motor – CCW

1 x HOBBYWING X6 Plus 2388 or 2480 Folding Propeller – CCW

APM Flight Controller for use in Atal Tinkering Package 1 and Hobby Projects by Learners, Beginners and Amateurs. Gives stable Flight for Drone Quadcopter Projects

Additional Information:

• Production Capacity: 100 per month
• Packaging Details: Standard

This motor provides a Motor kV of 2200.

In the field of Multirotors, there are so many brands that are making drone motors but Emax is giving us the best quality of drone motor at an affordable price.

Emax brand gained more popularity in the market due to the highest standards for optimal performance and reliability.

Please Note:

1. The BLDC motor rotation is always opposite to the direction of Thread.
2. As in this case, the motor rotation direction is CCW, so the Thread tightening direction will be CW

1. Vibration-free operation.
2. Very easy to install.
3. Windings are made from copper of high purity.
4. Powered by highest grade neodymium magnets.
5. Generates less heat during operations.

1 x  Emax MT2213 935KV brushless motor
1 x Pair 1045 Propeller and Accessories(as shown in the image)

Additional Information:

• Production Capacity: 100
• Packaging Details: Standard

The EFT E620P Hexacopter 20L Agricultural Spraying Drone Kit revolutionizes agricultural practices with its advanced capabilities. This professional-grade hexacopter offers an efficient and precise solution for crop spraying and agricultural tasks. Equipped with a powerful 20L tank, this drone kit enables the targeted application of fertilizers, pesticides, and other agricultural substances with accuracy and minimal waste. Its robust build and reliable flight performance ensure seamless operation even in challenging environments.
Classic Folding Body
Classic folding body, the new product continues the classic foldable body design, which is convenient for transportation and transition
The EFT E620P features intelligent flight control systems, including GPS positioning and waypoint navigation, enabling precise and automated spraying operations. With its high payload capacity and extended flight time, it covers large areas efficiently, saving time and resources.
Integrated Power Supply Wiring
Integrated power supply wiring, centralized power supply, separate signal, and power supply, reduce interference
Upgrade your agricultural practices with the EFT E620P Hexacopter 20L Agricultural Spraying Drone Kit, and experience enhanced efficiency, accuracy, and productivity in your farming operations.
Features:
Efficient Agricultural Spraying
20L Tank Capacity
Robust Build
High Payload Capacity
Safety Features
Precision and Accuracy
Scalable and Customizable
Package Includes:
1× E620P Drone Frame
1× 20 Liters Tank
3× Drone Propeller CCW
3× Drone Propeller CW
1× 8  L brushless Pump
4× Extended Spray Bar1 ×Universal Spray Pneumatic bracket
1×  RTK Mount
3× Hobbywing Motor CCW
1× Front radar Mount
1× Height radar Mount
Specification:-Item Type:
Spraying Drone
Propeller Type
34inch
Required ESC (A)
80A FOC
Loading Capacity (Kg)
46.5
LiPo Battery Cells(S)
14S
Wheelbase (mm)
1854
Frame Size (mm)
Folding size: 1224x1203x660, Opening size: 2717x2717x660
Shipping Weight23.5 kgShipping Dimensions80 × 60 × 55 cm

Tattu 30C 6S 22000mAh Lipo Battery is the most powerful battery and it is suitable for even the most demanding multi-rotor aircrafts and drones like DJI S1000, KOPTERWORX Hammer X8 and E1200 multirotors etc; Tattu 22000mAh 6S 30C Lipo has Maximum capacity, super long flight time beyond known limits and stable performance at the same time set new benchmarks – Simply flying at its best! Experience the difference a quality battery makes to your aircraft’s flight.
Key Features:Maximum Capacity

Super long flight time beyond known limits and stable performance at the same time set new benchmarks.

Low IR

Provides stable voltage until the end of the flight.

Energy Density

Specially adapted to each UAV type. Very high density in proportion to its capacity/weight.

– Discharge Plug: AS150+XT150
Safety

Tattu series is a battery of highest quality. It passed the UN 38.3 Test (Highest Quality Standard Level for Lithium Polymer Batteries).

Tattu 22000mAh 6S 30C Lipo Battery Specs:

Capacity: 22000mAh

Voltage: 22.2V/6S

Discharge Rate: 30C

Weight: 2472g

Size: 206*91*61mm

Package Includes:
1x Tattu 22.2V 25C 6S 22000mAh Lipo Battery

Additional Information:

• Packaging Details: Standard

Additional Information:

• Packaging Details: Standard

Additional Information:

• Packaging Details: Standard

This ZD850mm Full Carbon Fiber 850mm Hexa-Rotor Frame Combo is ideal for Heavy Duty Drone Applications because of its capability of withstanding the punishing requirements of heavy-duty drone applications!!! Let us explain why… The thing that separates this Z850 Full Carbon Fiber Frame from the rest of the Multirotor Frames is the use of 100% pure carbon for manufacturing this Hexacopter Frame. This Hexacopter Frame is made up of 100% 3K TWILL carbon fiber.

The arms of the frame are made from a 20mm carbon fiber tube which eliminates arm breakage at the motor mounts on a hard landing. This is Hexacopter Frame that employs 6 arms to get into the air. There are several advantages of a hexacopter frame over a quadcopter one, justifying the extra price tag.

For 6 arms, of course, there are more motors with a hexacopter meaning more power, meaning bigger batteries. This increase in batteries leads to an increase in flight time, which is also nice. Due to these extra motors, a hexacopter is also more stable than your quadcopter equivalent. Another great advantage of using hexacopters is if for any reason your quadcopter loses a motor, it goes down but with a hexacopter, on the other hand, in the majority of cases you will be able to land safely with one or maybe even two motors down; an extra inbuilt guarantee on your beloved copter.

The frame has a wheelbase of 850mm and weighs around 1210gm. The Z850mm Full Carbon Fiber 850mm Hexa-Rotor Frame Combo is specially designed for heavy-duty drone applications and has lots of space for mounting all the required components. This frame is ideal for mounting cameras and other accessories.

Explore more variety of multirotor accessories by clicking Drone parts

1. This pure carbon fiber is ideal to withstand your drone standards.
2. Ultra-Lightweight and Durable.
3. Made by 100% 3K Twill super strong and lightweight carbon fiber.
4. The frame has excellent strength.
5. The arm has multiple motor mounting holes.
6. Foldable arms
7. Plastic tripod connection

1 x ZD850mm Full Carbon Fiber 850mm Hexa-Rotor Frame 

This Combo Includes:

6 x Pure Carbon Fiber Tubes

4 x Landing Gear

6 x Motor mounts

6 x Folding Mechanism

1 x Camera Stand

2 x Mounting Plates

1 x Fitting Accessories

Additional Information:

• Packaging Details: standard

• Video Input Port: Mini HDMI
• Video Output Port: Ethernet
• Working Voltage: 12 V
• Power Consumption: 3 W
• TF Card Recording Resolution: 1080P (1920*1080) @ 30 fps, 720p (1280 x 720) @ 30 fps
• Video Storage Bitrate: 12 Mbps
• File Storage Format: FAT32
• Video Format: H.265
• Supported MicroSD Cards: MicroSD Class10, Max 32GB
• Working Temperature: -10 to 50℃
• Dimensions: 42 x 41 x 11 mm
• Weight: 164 g

• 1 x SIYI Air Unit HDMI Input Converter for MK32 HM30 MK15 MK32E MK15E 

This 5010 360KV High Torque Brushless Motor for Drones comes with self-cooling technology, so it will be able to withstand high temperatures up to 140° C (356 F). The motor can produce thrust up to 1500 gm on a 4s Lipo battery.

This brushless motor for the Drone is evaluated by the high torque offered by them. The motor gives an awesome flight experience on behalf of the NdFeB magnets and properly lubricated high-quality ball bearings. They can be paired with 14″ to 16″ Orange series HD Propellers and powered by 2S-6S Orange Li-PO Batteries through 20A-40A ESC.

They are equipped with high-temperature wires in the windings of the motor to minimize the burning of the motor. Also, they have high-temperature adhesives that are used to secure the stator windings and prevent them from shifting and getting pinched or shorting out.

NOTE: Please note that due to our availability, you might receive the motor in either black or silver color.

1. Equipped with four fan-style cooling holes that pump air through the motor while it runs
2. Rear threaded mounting holes with both 16 mm and 19mm hole spacing fit a variety of applications
3. NdFeB magnets with a high-temperature rating for trouble-free operation
4. 140° C high temperature rated wire is used for winding the motors
5. Plates are epoxy coated on the inner surface to prevent winding shorting out
6. Lubricated ball bearings are used to support the motor
7. High-temperature adhesives are used to secure the stator windings and prevent them from shifting, getting pinched, or shorting out

1 x 5010 360KV High Torque Brushless Motor for Drone
3 x Male Female Golden Connector Pairs with Heat Shrink Tube
1 x Propeller Mount with Accessories

Tarot 4008 TL2955 330KV Martin Brushless Motor is an electric motor that works with RC cars. It is manufactured by Tarot and imported by Tarot R/C. The motor is compatible with other similar products, like the TarotTarot 4020 TL2375 280KV brushless motor. This motor is also a replacement for the TarotTarot 5008 TL2955 330KV brushless motor, which means you can replace your old motor with this new one.

Tarot 4008 TL2955 330KV Martin Brushless Motor is an excellent, high-quality motor that you will be more excited about. It’s a great choice for many reasons, but the most important is probably its size and quality. It’s compact and lightweight, which makes it easy to transport—but it’s also quite durable, making it sturdy and reliable as well. We like that it’s a perfect fit for almost any model you can think of, whether your project involves putting together a whole fleet or just one ship or plane. We’ve used this in all kinds of projects over the years, and we know you’ll love it too.

Tarot 4008 TL2955 330KV Martin Brushless Motor is an ideal choice for beginners in the RC hobby. It comes with a convenient BEC that makes it capable of running on a 2S LiPoly battery. The brushless motor reaches top speeds of over 40mph and has a 13-turn 3D tachometer that works on an adjustable RPM range.

1. Powerful brushless motor for multirotor applications
2. Stator size of 4008 for increased torque and power
3. High-quality construction for long-lasting performance
4. Dual-bearing support for smooth and stable operation
5. Neodymium magnets for improved power output and efficiency
6. Multiple mounting options for easy installation
7. Efficient cooling mechanisms for optimal performance
8. High voltage compatibility for use with high voltage power systems
9. Suitable for heavy lift applications requiring a strong and reliable motor.

1 x Tarot TL2955 4008MT motor

Additional Information:

• Packaging Details: Standard

This is Hexacopter Frame which employs 6 arms to get into the air. There are several advantages of a hexacopter frame over a quadcopter one, justifying the extra price tag.

For 6 arms, of course, there are more motors with a hexacopter meaning more power, meaning bigger batteries. This increase in batteries leads to an increase in flight time, which is also nice. Due to these extra motors, a hexacopter is also more stable than your quadcopter equivalent.

Another great advantage of using hexacopters is if for any reason your quadcopter loses a motor, it goes down but with a hexacopter, on the other hand, in the majority of cases you will be able to land safely with one or maybe even two motors down; an extra inbuilt guarantee on your beloved copter.

The S500 has strong, light, and have a sensible configuration including a PCB(Printed Circuit Board) with which you can directly solder your ESC‘s to the Quadcopter. So, making the Quadcopter build fast and easy. So, it avoids the use of extra PDB(Power Distribution Board) and makes the mounting clean and neat. The S550 Hexacopter Frame is a highly flexible frame during the mounting of various components like flight controller, battery, etc.

The S550 hexacopter frame kit is an excellent strong lightweight Hexacopter frame with carbon fiber landing gear and a bonus built-in the printed circuit board (PCB) for neat and easy wiring. It comes with integrated PCB for neat and easy wiring. The added lift capacity of a hex configuration makes this frame for carrying larger payloads such as camera systems and other electronic components. This makes for an exceptional camera rig or simply a very agile and powerful multi-rotor frame for aerobatics.

It comes with pre-threaded brass sleeves for all of the frame bolts, so attaching the arms to the mainframe is done within few minutes.  Also, it requires one size of bolt for the overall build and thus a unique one-size hex wrench which makes hardware mounting very convenient.

The assembly of this frame is super simple with pre-threaded sleeves for all the frame bolts so no lock-nuts are required. The motor mounts are ready to take a selection of motors with mounting hole centers of 16, 19 and 25 mm once again making this a very universal frame at a very affordable price.

The frame has the wheelbase of 550mm and whole frame kit weighs around 760gm. It features mounting tabs at the front and rear end on the bottom plate of the mainframe for mounting cameras and other accessories.

Features:

1. Made by advanced engineering material, super strong & smooth
2. Easy to assemble and disassemble.
3. The frame is tough and durable.
4. The main glass fiber frame has good strength.
5. The arm equips support ridges for better and faster forward flight.
6. Features pre-threaded brass sleeves.
7. Large mounting tabs for camera mounting.
8. PCB for easy and neat wiring
9. Easy assembly

1 x S550 quadcopter Frame(Top and Bottom) with PCB soldered centerboard

6 x S550 arms

Landing gear setup & Accessories set (as shown in the image)

Recommendation (NOT Included ) :

Additional Information:

• Packaging Details: Standard

Additional Information:

• Packaging Details: Standard

The landing gear adds an extra protection to your flying platform and all other precious equipment. This protection is available at no cost when compared with the cost of all the accessories that you ride on your multirotor.It is made up of high-quality ABS Plastic. These gears are very easy to install on your Multirotor.
With such crab legs, you do not have to worry too much about the landing of your Multirotor as the Gears are the best solution to reduce the impact of hard and rough landings.

This is a  Skydroid T10 2.4Ghz 10CH Remote Controller with T10 10-Channel Receiver.
Dual antenna plus dual RF module with integrated control algorithms ensuring reliable communication via full angle high gain antennas the t10 uses the latest in FHSS(Frequency Hopping Spread Spectrum) technology to achieve perfect control and operation
Parameter adjustments via aPP with upgraded traditional oSd to touch panel control ( Connected via Bluetooth or USe, also supports S BUS PPM PWM Seria ports and external devices, etc
Connects the app via Bluetooth, switching the operation model, adjusting the data of forward and reverse, rudder volume, channel binding, runaway protection value, SBUS, PPM output, and digital baud rate. Providing parameter saving and loading functions
Specially designed for UAV, Helicopter, Fixed Wing, Multi Rotor or Boat operation In video transmission (optional camera), Data Link, and control of UAV
Integrated with digital video transmission, farthest to.
Features:
 
 Dual Antenna plus dual RF module with integrated control algorithms ensuring reliable communication via full-angle high antenna.
 Integrated with digital video transmission farthest to 10 km.
 Integrated with data transmission, farthest to 20 KM.
 Parameter adjustment via APP with upgraded traditional OSD to touch panel control.
 Connected via Bluetooth or USB, also supports S.BUS, PPM, PWM serial ports, and external devices.
Package Includes:
1 x Skydroid T10 2.4Ghz 10CH Remote Controller with Mobile Phone Holder
1 x T10 10-channel Receiver
1 x USB type C Cable
1 x Remote Hanging Strap
1 x Knob Spring Strip

Additional Information:

• Packaging Details: Standard

Ready to build hexacopter frame. High quality material.
Specification of this ZD850 frame.
1. Carbon fiber arm of 20mm
2. 16mm + 10mm carbon tube tripod stand
3. 3mm bottom center plate
4. 1.5mm upper central plate
5. CNC machined aluminium alloy folding pieces

Total weight of this ZD 850 frame is 1210grams.
Recomended motor which supports propeller size 15 inches.
 
Motor size from 35 to 40 size. Battery size depends on motors and propellers and flight time.

Additional Information:

• Packaging Details: Standard

DJI 2212 920 KV CW is the best motor for you as beginner in drone . we have everything for you to get started with your drone project. This motor provides a Motor kV of 920 and gives a thrust of 500 gm.

In the field of Multirotors, there are so many brands that are making drone motors but Ready to Sky is giving us the best quality of drone motor at an affordable price.

Ready to Sky brand gained more popularity in the market due to the highest standards for optimal performance and reliability.

Note:

1. Please avoid take-off and landing in Dirt (Or loose soil, Dirt gets inside motors and spoils  them
2. Clean the motors with a hair drier OR blower after 4-5 flights to get the extended life
3. The Motor comes with two types of stickers as shown in the images above, they are shipped randomly

This is CW rotating BLDC Motor, 

1. Stable Performance
2. The design of the 2212 920KV  is capable of withstanding competitional conditions.
3. Comes in a compact size
4. Offers great performance and value for money
5. This motor offers 0.5 kg of thrust

1 x 2212 920KV Brushless Motor for DJI
1 x Black Cap

Additional Information:

• Packaging Details: Standard

• Each battery pack is made with impedance matched cells for maximum performance
• Most compact and minimum weight for the capacity
• Higher number of life cycles than other cells.

Additional Information:

• Packaging Details: Standard

Tattu 22000 mah Li-po Battery one set

Minimum Capacity: 22000mah

Configuration: 6S1P / 22.2V / 6 Cells

Discharge Rate: 25C

Max Burst Discharge Rate: 50C

Net Weight(±20g): 2490g

Dimensions: 200mm Length X 91mm Width X 64mm Height

Balancer Connector Type:JST-XHR

Additional Information:

• Packaging Details: Standard

Package Include:1× ZD850 Hexa-Rotor Carbon Fiber Frame.6× Tarot 4006 MT motor.3× 1550L T-TYPE Gemfan Carbon Fiber Propeller 1CW+1CCW - 1 Pair.6× Readytosky 2-6S 40A OPTO ESC for Drone.1× CUAV X7+ Flight Controller | Autopilot For PX4 & APM Drone Hardware2× 30cm Lipo Battery Strap Belt.1× Tattu 22.2V 22000mAh 6S 25C Lipo Battery.1× SKYRC Dual Channel PC1080 LiPo Battery Charger1× Skydroid H12 Inbuild Display Remote Control without camera

Additional Information:

• Packaging Details: Standard

The Little Favorite LittleBee 30A-S OPTO Electronic Speed Controller is exactly what you are looking for in a lightweight, super powerful speed controller. Little Bee uses a Silabs processor and fast dedicated driver chips. It comes flashed with BLHeli-S Firmware utilizing Oneshot125 communication protocol making it fast and responsive to throttle movements.

The Little Bee ESC is already well known and respected for its high thrust output and reliability. These top of the range Little Bee 30a BLHeli_S ESCs are the pinnacle of ESC performance today. BLHeli_S delivers a throttle response that is smooth as silk. The main factor contributing to this is that it uses hardware to generate motor PWM.

These Little Bee 30a ESCs provide massive amperage for the most demanding of performance drones, sitting at 30a current draw happily. These are the ideal ESCs for high end or experimental systems, for example running 5s batteries or 6″ tri-blade props. These ESCs support one-wire pass-through to allow flashing via clean flight when paired with a suitable flight controller.

Compatible with all current flight controllers, including Naze, SPF3, Revo F4.
Recommended setups: 2205-2208 motors, 5 or 6″ Tri-blade props, 4s or 5s battery.

Note: Capacitors are always recommended for use with ESCs to smooth power delivery. These are not required for operation

1 x Favorite LittleBee 30A-S OPTO Electronic Speed Controller(Copy).

1. BEC: No BEC.
2. Light weight
3. MCU: SILABS EFM8BB21F16, MCU running at 48MHz
4. Dedicated driver chip
5. OPTO ESC
6. Battery: 6-25.2V (2-6S Lipo)
7. PCB board: 4 layers blind pole board, 3 oz copper
8. Motor Wire: 70mm (20AWG)
9. Signal Wire: 120mm
10. Firmware: BLHeli_S (Supports Oneshot / Oneshot42 and Multishot / Active Braking – dampened light mode)

Additional Information:

• Packaging Details: Standard

FS-CT6B is a 2.4GHz 6 channel RC transmitter and receiver set, manufactured by FlySky. It has a 0.8W transmitter with a range up to 1KM in line of sight and receiver with 6-channels. This RC Rx and Tx set gives a reliable performance for drone quadcopter or multicopters . 

DJI 2212 920 KV is the best motor for you we have everything for you to get started with your drone project. This motor provides a Motor kV of 920 and gives a thrust of 500 gm.

In the field of Multirotors, there are so many brands that are making drone motors but Ready to Sky is giving us the best quality of drone motor at an affordable price.

Ready to Sky brand gained more popularity in the market due to the highest standards for optimal performance and reliability.

1. Please avoid take-off and landing in Dirt (Or loose soil, Dirt gets inside motors and spoils  them )
2. Clean the motors with a hair drier OR blower after 4-5 flights to get the extended life
3. The Motor comes with two types of stickers as shown in the images above, they are shipped randomly

This is CCW rotating BLDC Motor

1. Stable Performance.
2. The design of the 2212 920KV  is capable of withstanding competitional conditions.
3.  The Motor Comes in a compact size.
4. The motor goes with 30 A ESC.
5. Offers great performance and value for money

1 x 2212 920KV Brushless Motor for DJI

1 x Silver Cap

Additional Information:

• Packaging Details: Standard

The KK 2 Flight Controller Board with 6050 MPU Board and Atmel 644PA is the next generation of KK flight control boards. It comes preinstalled with the KK 2 firmware and features advanced processor technology from STMicroelectronics, sensor technology, InvenSense system delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.

With prosperous industry practice, our entity has gained huge appreciation in the market by presenting 1000 KV Brushless DC Motor A2212 with soldered connectors to our respected patrons.

Features:

Model: A2212 10T

Motor KV (RPM/V): 1400

Runs on 2-3 Cell Li-Po battery

ESC Requirement minimum 25A

Length 43.5mm with shaft

Diameter 28.5mm

Shaft Diameter 3.17mm

1400 RPM/V no load speed

Free Load Current 0.7A at10V

Maximum Efficiency : 86%

Weight 52 gm

Included : Propeller Adaptor, Motor Mount, Mounting Screws

1. The 9450 Self-Locking Propeller (CW + CCW) designed specifically for the Readytosky Motor and DJI Motor. These high-performance propellers are engineered to provide exceptional stability, efficiency, and durability, making them the perfect choice for aerial enthusiasts and professionals alike.
2. Self-Locking Mechanism:
   • Self-locking propellers have a mechanism that allows them to lock onto the motor shaft without the need for a separate nut or bolt.
   • This design makes installation and removal of propellers quicker and more convenient.
3. Clockwise (CW) and Counter-Clockwise (CCW) Rotation:
   • In drone applications, propellers are often designated as either clockwise (CW) or counter-clockwise (CCW) rotation to ensure proper installation on corresponding motors.
   • The pair of CW and CCW propellers are designed to create balanced thrust, enhancing the stability and performance of the drone.
4. Material:
   • Propellers are commonly made from materials such as plastic, carbon fiber, or a composite of various materials. The choice of material affects the propeller's strength, weight, and overall performance.
5. 9450 Size:
   • The designation "9450" likely refers to the size of the propeller. In this case, it might indicate a diameter of 9.4 inches and a pitch of 5 inches.
6. Compatibility:
   • Self-locking propellers are designed for specific drone models or motors. It's crucial to ensure compatibility with your drone or UAV before purchasing.
7. Efficiency and Performance:
   • Propellers play a crucial role in determining a drone's efficiency and overall flight performance. Self-locking mechanisms contribute to secure attachment and stability during flight.
8. Quick Release:
   • The self-locking feature often implies a quick-release system, allowing users to change propellers rapidly without requiring additional tools.
9. Balanced Design:
   • Well-designed self-locking propellers are balanced to minimize vibration and ensure smooth, stable flight.

Crafted with precision and utilizing advanced materials, these propellers offer a secure self-locking mechanism, ensuring quick and hassle-free installation. The clockwise (CW) and counterclockwise (CCW) rotation propellers are included in this set, providing optimal compatibility with both Readytosky and DJI motors.

With a focus on performance, these propellers have been designed to maximize thrust and efficiency, resulting in smooth and stable flight experiences. Their aerodynamic shape and balanced design reduce turbulence and minimize noise, allowing you to capture breathtaking aerial footage without any distractions.

The 9450 Self-Locking Propellers are built to withstand rigorous flights and harsh environments. The high-quality construction materials make them resistant to impacts, ensuring long-lasting reliability and minimal maintenance requirements. You can confidently push the limits of your drone without compromising on performance.

• Self-locking mechanism for easy installation
• Designed for stability, efficiency, and durability
• Includes both clockwise (CW) and counterclockwise (CCW) rotation propellers
• Aerodynamic shape and balanced design reduce turbulence and noise
• Impact-resistant construction for long-lasting reliability
• Tool-free installation with a simple push and lock mechanism
• Versatile for various applications such as aerial photography and drone racing

Additional Information:

• Packaging Details: Standard

Radiomaster TX12 MKII ExpressLRS EdgeTX Transmitter remote control with RP1 ExpressLRS 2.4ghz Nano Receiver is suitable for all types of fixed-wing aircraft, gliders, helicopters, cars, boats, robotics, multi-rotor aircraft, and anything else you might create, if you can build it this RadioMaster TX12 can control it.

Radiomaster TX12 MKII ExpressLRS EdgeTX Transmitter comes Preinstalled with EdgeTX, the RadioMaster TX12 MKII which is cutting-edge software that is constantly evolving and improving. RadioMaster works closely with the EdgeTX team to develop features and optimize the user experience. We will continue to contribute and support projects like EdgeTX, ensuring the concepts of open standards are carried forward.

1. Added internal Express LRS module support
2. Updated main board design from STM32F207 to STM32F407
3. Improved USB-C QC 3.0 Charging
4. Precision hall-effect gimbals as standard
5. EdgeTX operating system installed from the factory
6. Updated rear case with comfortable grips
7. Improved S1 / S2 slider grip
8. SD Card included
9. Provide M1 and M2 modes

1 x Radiomaster TX12 MKII ExpressLRS EdgeTX Radio Controller

1  x  Antenna

1 x  USB-C Cable

1 x Quick Start Guide

Additional Information:

• Production Capacity: 50

The “1550L T-TYPE Gemfan Carbon Fiber Propeller” is a pair of carbon fiber propellers used for multirotor drones. The “1550” in the name indicates the size of the propellers, with “15” representing the length in inches, and “50” signifying the pitch in inches. The “L” may denote a specific design or variant within the Gemfan propeller lineup. The “T-TYPE” suggests that these propellers have a T-shaped design, which can impact the drone’s aerodynamics. Carbon fibre is known for its strength and lightweight properties, making these propellers suitable for high-performance drones.

Brand: 1550L T-TYPE  Genfan  Carbon Fiber Propeller
Style –  T-TYPE Use Multirotor
Blades –  2-blades
Colour  –  Black Material Carbon Fiber
Rotation  –  CW CCW

Features:
Here are some common features associated with these propellers:

Carbon Fiber Material: These propellers are made from carbon fibre, known for its exceptional strength-to-weight ratio. Carbon fibre is both durable and lightweight, making it ideal for high-performance drone applications.

Size: The “1550” size indicates the length and pitch of the propellers. In this case, they are 15 inches long with a 5-inch pitch.

T-TYPE Design: The “T-TYPE” design may have unique aerodynamic properties that enhance the performance of the drone. This design could impact efficiency, lift, and overall flight characteristics.

Balanced Performance: Well-designed propellers should offer balanced performance, including stability, efficiency, and responsiveness during flight.

Easy Installation: These propellers are typically designed for straightforward installation and replacement on compatible multirotor drone models.

Compatibility: Ensure that these propellers are compatible with your specific drone model, as compatibility can vary depending on the manufacturer.

Performance Optimization: These propellers may be optimized for specific performance characteristics, such as lift, thrust, or efficiency, making them suitable for particular types of drones or applications.

More Features:
Super balance with stable performance
Lightweight, durable and practical
With high-quality, easy-to-install and assemble
Have stable performance and not easy to break for long-term use
With this blade set, your RC quadcopter will fly as high as before
Our propellers are CNC machined, then hand-finished to balance

i. For any Doubt
ii. For any Advice & others

Overall, consulting with drone experts can help you make informed decisions, mitigate risks, and optimize the performance of your drone for your specific needs and objectives.

Book your slot now: 
Consult with Our Drone Expert 

Package Included:
1× 1550L T-TYPE Gemfan Carbon Fiber Propeller 1CW+1CCW - 1 Pair

This Holybro SiK Telemetry Radio is a small, light and inexpensive open-source radio platform that typically allows ranges of better than 300m “out of the box” (the range can be extended to several kilometers with the use of a patch antenna on the ground). This radio is plug-n-play all Pixhawk Standard and other Flight Controller, providing the easiest ways to setup a telemetry connection between your Autopilot and a ground station. It uses open source firmware which has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Ardupilot, QGroundControl, PX4 Autopilot. The radios can be either 915Mhz or 433Mhz and you should purchase the model which is appropriate for your country/region.

1. Open-source SIK firmware
2. Plug-n-play for Pixhawk Standard Flight Controllers
3. Easiest way to connect your Autopilot and Ground Station
4. Interchangeable air and ground radio
5. Micro-USB port (Type-C Adapter Cable Included)
6. 6-position JST-GH connector
7. RP-SMA connector
8. Transparent serial link
9. MAVLink protocol framing
10. Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle
11. Configurable through Mission Planner & APM Planner

2 x Radio modules with antennas
1 x Micro-USB to USB-A cable
1 x Micro-USB to Micro-USB OTG adapter cable
Micro USB to Type C Adapter
1 x JST-GH-6P to JST-GH-6P cable (for Pixhawk Standard FC)
JST-GH-6P to Molex DF13 6P (for Pix32, Pixhawk 2.4.6, etc.)

Specifications : 

1. Model: Holybro SiK Telemetry Radio V3 500mW 915 MHz
2. Plug-n-play for Pixhawk Standard Flight Controllers
3. The easiest way to connect your Autopilot and Ground Station
4. Interchangeable air and ground radio
5. 100 mW maximum output power (adjustable) -117 dBm receive sensitivity
6. Dimensions: 28 x 53 x 10.7mm (without antenna)