X

Spectrum Technology

Science Market, Near B.D. High School, Ambala, Haryana

| GST  06ACVFS5937P1ZY

is a member of IndiaMART

| Verified Supplier

|

★★★★★
★★★★★
View Mobile Number 62% Response Rate

Our Products

+View All

Industrial Sensors

Spectrum technology Sensing Components detect, measure, analyze, and process various changes that occur on productions sites, such as changes in position, length, height, displacement, and appearance. They also contribute to predicting and preventing future events.

We have customized sensors for your applications and all our sensors meet industrial specifications.

DC 24V 3amp 24v3amp Power Supply PCB Noise Filter SMPS Adapt
  • DC 24V 3amp 24v3amp Power Supply PCB Noise Filter SMPS Adapt
  • DC 24V 3amp 24v3amp Power Supply PCB Noise Filter SMPS Adapt
  • DC 24V 3amp 24v3amp Power Supply PCB Noise Filter SMPS Adapt
  • DC 24V 3amp 24v3amp Power Supply PCB Noise Filter SMPS Adapt
  • DC 24V 3amp 24v3amp Power Supply PCB Noise Filter SMPS Adapt
  • DC 24V 3amp 24v3amp Power Supply PCB Noise Filter SMPS Adapt
  • DC 24V 3amp 24v3amp Power Supply PCB Noise Filter SMPS Adapt
Interested in this product?
Get Best Quote

DC 24V 3amp 24v3amp Power Supply PCB Noise Filter SMPS Adapt

Rs 450 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Input Voltage220-250
Output TypeSingle
Power72 Watt
Output Current3Amp

!!! SPECIFICATIONS !!!
  • INPUT VOLTAGE 110V/220V + 15%
  • OUTPUT VOLTAGE  24V   3Amp  72W
  • Efficiency better than 90%
  • OverVoltage and Under voltage protection
  • In Line Noise Filter
  • Short Circuit Protection
  • Constant Voltage PSU
  • Best Quality PCB Material
  • Size :- 105 mm  X 48 mm
  • Contant output
  • Can Run 24*7 Without any Problem
Applications:
  • Powerful 24v 24w 3A max Current Draw. 
  • Power Supply for LED, SMD, LED Strip, RGB LED Strip
  • CCTV Cameras Supply
  • Ideal for Routers / Modems / Mobile Phones / Mp3 players / POS Machines etc.
  • Best for Routers , Wifi Routers security/Spy Camera Receiver and some advanced Cameras CCTV , Gadgets , Portable Players , Set Top Boxes,best for Toys etc., Charging or any gadgets as per the rating of the device.
  • Can be used in industrial Automation Projects where small space is available. Package Contains 2 x 24V 3A power supply

View Complete Details

Yes, I am interested!

0-5 V Output RTD PT100 Temperature Sensor Transmitter
  • 0-5 V Output RTD PT100 Temperature Sensor Transmitter
  • 0-5 V Output RTD PT100 Temperature Sensor Transmitter
  • 0-5 V Output RTD PT100 Temperature Sensor Transmitter
  • 0-5 V Output RTD PT100 Temperature Sensor Transmitter
  • 0-5 V Output RTD PT100 Temperature Sensor Transmitter
  • 0-5 V Output RTD PT100 Temperature Sensor Transmitter
Interested in this product?
Get Best Quote

0-5 V Output RTD PT100 Temperature Sensor Transmitter

Rs 1,200 / Piece(s)Get Latest Price

Minimum Order Quantity: 1 Piece(s)

Product Name : Temperature TransmitterModel : SBWZ;Material : Plastic
Type : PT100Temperature Range : 0-200 Celsius DegreeOutput Voltage : 0-5V DC
Power Supply : 24V DCRated Load : 250 OhmPrecision : 0.2%
Size : 4 x 4.3 x 2cm/1.6" x 1.7" x 0.8"(L*W*T)Color : Blue
Net Weight : 25g;Package Content : 1 x Temperature Transmitter 2 x Installation Screws
Same Day Shipping.
We will Provide help through email for your micro controller coding.
In case of any query, please contact us

View Complete Details

Yes, I am interested!

DS18B20 Waterproof Digital Temperature Probe or Sensor
Interested in this product?
Get Best Quote

DS18B20 Waterproof Digital Temperature Probe or Sensor

Rs 250 / Piece(s)Get Latest Price

Minimum Order Quantity: 1 Piece(s)

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C.
Because they are digital, you don’t get any signal degradation even over long distances! These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems.

Product Details

  • Stainless steel encapsulated waterproof temperature sensor DS18b20 temperature sensor 18B20
  • Original DS18B20 temperature sensor probe used chips
  • Encapsulated waterproof high quality stainless steel tube anti-rust
  • Stainless steel housing (6x50mm), leader length 100cm
  • After each probe to undergo a rigorous testing packaged individually
  • 3.0V~5.5V power supply
  • 9~12-adjustable resolution
  • Temperature range-55 ° c ~+125 ° c
  • No external components, and unique single-bus interface
  • Output lead wire: Red (VCC), white (DATA), black (GND)

Applications/Uses

  • Agricultural Equipment
  • Audio Equipment
  • Automotive
  • Climate Control
  • GPS Devices
  • Hard Disk Drive
  • Medical Equipment
  • Set-Top Boxes
  • Telecommunications

View Complete Details

Yes, I am interested!

Arduino Mega2560-16au R3 Board ATMEL with USB Cable
Interested in this product?
Get Best Quote

Arduino Mega2560-16au R3 Board ATMEL with USB Cable

Rs 590 / Piece(s)Get Latest Price

Minimum Order Quantity: 1 Piece(s)

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

T his board is based on and fully compatible with Arduino Mega 2560 R3. The Roboduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Uno, Duemilanove or Diecimila.

The Roboduino Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.

Features:

  • ATmega2560 microcontroller
  • Input voltage - 7-12V
  • 54 Digital I/O Pins (14 PWM outputs)
  • 16 Analog Inputs
  • 256k Flash Memory
  • 16Mhz Clock Speed
Documents:
Schematic
Product Page
Arduino IDE Download

View Complete Details

Yes, I am interested!

Water Proof RTD PT100 Temperature Sensor, Stainless Steel
Interested in this product?
Get Best Quote

Water Proof RTD PT100 Temperature Sensor, Stainless Steel

Rs 240 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

  • Type:Pt100
  • Measuring range:-50~500 ℃ (-58~932)
  • Cable Total length:2 meters(6.5ft, include the probe)
  • Probe length:100mm
  • Probe diameter:5mm
  • Probe material:Stainless Steel
  • Terminal:3 insulated forks
If you have any questions, please feel free to ask and contact us to resolve the issue before opening a case.
Thanks a lot!

Package Include:

1x Pt100 temperature sensor

View Complete Details

Yes, I am interested!

Differential MPX5010 Integrated Silicon Pressure Sensor DPT
  • Differential MPX5010 Integrated Silicon Pressure Sensor DPT
  • Differential MPX5010 Integrated Silicon Pressure Sensor DPT
Interested in this product?
Get Best Quote

Differential MPX5010 Integrated Silicon Pressure Sensor DPT

Rs 1,090 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Black Two Port

Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and CalibratedThe MPxx5010 series piezoresistive transducers are state-of-the-art monolithic silicon pressure sensors designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A/D inputs. This transducer combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional to the applied pressure. The axial port has been modified to accommodate industrial grade tubing

This sensor detects changes in air pressure at its two ducted ports. The output of the sensor is an analog voltage that varies depending on the pressure. The pressure sensor can detect changes in both positive and negative air pressure. Positive air pressure is equivalent to blowing into a tube. Negative air pressure creates a vacuum, similar to sucking from a straw.

 

 

Connections

To connect the pressure sensors to the Arduino Shield, attach the three leads of the device as shown in the figure. The sensor is a 6-pin device, but only pins 1-3 are connected. Note that pin 1 is denoted by a small notch.

 

 

Although the leads on the pressure have the standard 0.100" spacing, it is recommended that you connect the device to the Arduino using male-female jumper wires, rather than plugging the sensor directly into the breadboard of the Arduino Shield. This allows you more flexibility in connecting tubes to the sensor.

 



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2 days
  • Packaging Details: 1 sesnor

View Complete Details

Yes, I am interested!

DC 5V Pressure Transducer Sensor 0-1.2 MPa for Oil Fuel Gas
  • DC 5V Pressure Transducer Sensor 0-1.2 MPa for Oil Fuel Gas
  • DC 5V Pressure Transducer Sensor 0-1.2 MPa for Oil Fuel Gas
  • DC 5V Pressure Transducer Sensor 0-1.2 MPa for Oil Fuel Gas
  • DC 5V Pressure Transducer Sensor 0-1.2 MPa for Oil Fuel Gas
  • DC 5V Pressure Transducer Sensor 0-1.2 MPa for Oil Fuel Gas
  • DC 5V Pressure Transducer Sensor 0-1.2 MPa for Oil Fuel Gas
  • DC 5V Pressure Transducer Sensor 0-1.2 MPa for Oil Fuel Gas
Interested in this product?
Get Best Quote

DC 5V Pressure Transducer Sensor 0-1.2 MPa for Oil Fuel Gas

Rs 1,499 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

DC 5V Pressure Transducer Sensor 0-1.2 MPa for Oil Fuel Gas Water Air

Description:

  • Working Voltage: 5VDC
  • Output Voltage: 0.5-4.5 VDC
  • Sensor material: Carbon steel alloy
  • Working Current: <=10 mA
  • Working Pressure Range: 0-1.2 MPa
  • Cable length: 17cm / 6.69inch
  • Sensor Length: Approx. 5.1cm / 2.01inch
  • Screw Diameter: 1.3cm / 0.51inch
  • Destroy Pressure: 3.0 MPa
  • Working TEMP. Range: -20 to 85 Celsius Degree
  • Storage Temperature Range: 0-85 Celsius Degree
  • Measuring Error: +_ 1.5 %FSO
  • Temperature Range Error: +_3.5 %FSO
  • Response Time: <=2.0 ms

Package Includes:

  • 1 x Pressure Transducer Sensor
  • 1 x Cable


Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2 days

View Complete Details

Yes, I am interested!

PT100 MAX31865 RTD Temperature Thermocouple Sensor Amplifier
  • PT100 MAX31865 RTD Temperature Thermocouple Sensor Amplifier
  • PT100 MAX31865 RTD Temperature Thermocouple Sensor Amplifier
  • PT100 MAX31865 RTD Temperature Thermocouple Sensor Amplifier
Interested in this product?
Get Best Quote

PT100 MAX31865 RTD Temperature Thermocouple Sensor Amplifier

Rs 1,090 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

PT100 to microcontrollerHigh quality PCB

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, basically a kind of thermistor. In this sensor, the resistor is actually a small strip of Platinum with a resistance of 100 ohms at 0°C, thus the name PT100. Compared to most NTC/PTC thermistors, the PT type of RTD is much most stable and precise (but also more expensive) PT100's have been used for many years to measure temperature in laboratory and industrial processes, and have developed a reputation for accuracy (better than thermocouples), repeatability, and stability.

However, to get that precision and accuracy out of your PT100 RTD you must use an amplifier that is designed to read the low resistance. Better yet, have an amplifier that can automatically adjust and compensate for the resistance of the connecting wires. If you're looking for a great RTD sensor, today is your lucky day because we have a lovely Ours RTD Sensor Amplifier with the MAX31865 breakout for use with any 2, 3 or 4 wire PT100/1000 RTD!

We've carried various MAXIM thermocouple amplifiers and they're great - but thermocouples don't have the best accuracy or precision, for when the readings must be as good as can be. The MAX31865 handles all of your RTD needs, and can even compensate 3 or 4 wire RTDs for better accuracy. Connect to it with any microcontroller over SPI and read out the resistance ratio from the internal ADC. We put a 430Ω 0.1% resistor as a reference resistor on the breakout. We have some example code that will calculate the temperature based on the resistance for you.

We even made the breakout 5V compliant, with a 3.3V regulator and level shifting, so you can use it with any Arduino or microcontroller.

Each order comes with one assembled RTD amplifier breakout board. Also comes with two 2-pin terminal blocks (for connecting to the RTD sensor) and pin header (to plug into any breadboard or perfboard). A required PT100 RTD is not included! (But we stock them in the shop). Some soldering is required to solder the headers and terminal blocks to the breakout, but it's an easy task with soldering tools.

Please note: this does not include an RTD sensor! this Module is both for PT100/1000 RTD

Package Included:

1 x Arduino MAX31865 PT100/ PT1000 RTD Temperature Thermocouple Sensor Amplifier Board
  • Unit Type: piece
  • Package Weight: 0.001kg (0.00lb.)
  • Package Size: 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in)

View Complete Details

Yes, I am interested!

Mpx2010dp Calibrated Silicon Differential Pressure Sensor
Interested in this product?
Get Best Quote

Mpx2010dp Calibrated Silicon Differential Pressure Sensor

Rs 950 / Piece(s)Get Latest Price

Minimum Order Quantity: 1 Piece(s)

The MPX2010DP is a differential, dual port silicon pressure sensor in 4 pin SIP package. This piezoresistive pressure sensor provides very accurate and linear voltage output directly proportional to applied pressure. It includes on-chip integrated strain gauge and thin film resistor network. The sensor is laser trimmed for precise span, offset calibration and temperature compensation.
  • On-chip temperature compensated and calibrated
  • Pressure range from 0KPa to 10KPa
  • 25mV full scale voltage
  • Temperature compensated over 0°C to 85°C
  • Ratiometric to supply voltage
  • Sensitivity of 2.5mV/KPa
  • Response time of 1ms
  • Pressure hysteresis of ±0.1%VFSS
  • Supply voltage range from 10VDC to 16VDC
  • Operating temperature range from -40°C to 125°C
ApplicationsSensing & Instrumentation; Consumer Electronics; Medical

View Complete Details

Yes, I am interested!

Load Cell
Interested in this product?
Get Best Quote

Load Cell

Get Latest Price

Introduction

Applicable to electronic scale, price computering scale, electronic platform scale, digital scale; parcel post scale, electronic balance and all varieties of commercial scales by single load cell.

 

Specification

  • Capacity: 40KG 5 KG 10 KG 80 KG ETC.
  • Rated output(MV/V): 2.0±0.15
  • Accuracy class: C2
  • Maximum number of laod cell verification intervals(N max): 2000
  • Minimum number of laod cell verification intervals(Vmin): EMax/5000
  • Combined erro(%RO): <±0.030
  • Creep(%RO/30min): 0.03
  • Temperature effect on sensitivity(%RO/°C): 0.0016
  • Temperature effect on zero(%RO/°C): 0.003
  • Zero balance(%RO): 1.0
  • Input resistance(Ω): 402±6
  • Output resistance(Ω): 350±3
  • Insulation resistance(MΩ): 5000
  • Recommended excitation voltage(V): 10~15
  • Compensated temperature range(°C): -10~+40
  • Operating temperature range(°C): -35~+80
  • Safe overload(%RO): 150
  • Ultimate overload(%RO): 200
  • Load cell material: Aluminium
  • Plafform size: 350x350mm
  • Connecting cable: ø4.2x350mm
  • Method of connecting wire: Red(+),Black(-),Green(+),White(-)

View Complete Details

Yes, I am interested!
© Spectrum Technology. All Rights Reserved (Terms of Use)