X

Our Product Range

+View All

Fosroc Construction Chemicals

Prominent & Leading Wholesale Supplier from Chennai, we offer Fosroc Conplast Wl Xtra, Fosroc Brushbond Waterproof Coating 27 KG, Fosroc Cebex 112, Fosroc Lokfix S/P, Red Fosroc Lokfix E75, Packaging Size: 385 ml and Fosroc Renderoc FC, Packaging Size: 25 kg.

  • Fosroc Conplast Wl Xtra
  • Fosroc Conplast Wl Xtra
  • Fosroc Conplast Wl Xtra
Interested in this product?
Get Best Quote

Fosroc Conplast Wl Xtra

₹ 1,570/ 20 LitreGet Latest Price

Form of ChemicalLiquid
Usage/ApplicationIntegral Waterproofing Liquid admixture for concrete and motar
Packaging Size1 Litre & 5 Litre & 20 Litre
BrandFosroc
CategoryWaterproofing Coating
CoverageThe minimum dosage is 125ml and the maximum 200mi per 50kg of cement
TypeIntegral Waterproofing Liquid Admixture
ColorWhite Crystal

Conplast WL Xtra waterproofs by improving the quality of the

concrete or mortar. It reduces the water demand for required

workability and minimises segregation and bleeding. Thus it is

more effi cient compared to traditional powder and conventional

integral waterproofi ng compounds as its use results in two fold

improvement of concrete or mortar. 

Uses

 To minimise permeability and increase the waterproofi ng

properties of concrete, plaster and cement sand mortars for

critical applications like roof slabs,screeds, basements, external

plastering, bathroom fl oors, water tanks, sumps, drains etc.

 Feature and Benefi ts:

 Advanced Technology : New generation molecule

yields high performance concrete. Suitable for any

grade of concrete including higher grades.

 Corrosion resistant: Meets the requirements of

Japanese code JIS Z1535 (modifi ed) fi rst of kinds in

the integral water proofi ng range.

 High Strength : Due to better dispersion of cement

particles and helps in the better degree of hydration

yielding high strength compared to control.

 Cohesive Mix : Improves workablity and cohesiveness

of the concrete.

 Durability : Improves durability due to reduction in

permeability of concrete and corrosion resistance of steel.

View Complete Details

Yes, I am interested!

  • Fosroc Brushbond Waterproof Coating 27 KG
  • Fosroc Brushbond Waterproof Coating 27 KG
  • Fosroc Brushbond Waterproof Coating 27 KG
  • Fosroc Brushbond Waterproof Coating 27 KG
  • Fosroc Brushbond Waterproof Coating 27 KG
Interested in this product?
Get Best Quote

Fosroc Brushbond Waterproof Coating 27 KG

₹ 71/ KgGet Latest Price

Minimum Order Quantity: 27 Kg

Product Brochure Watch Video

Usage/ApplicationTerrace, Bathroom, Sunken Waterproofing
Packaging Size27 kg
Coverage14 Sq.m/27 kg pack
Type20 kg Powder and 7 kg Liquid
ColorGrey
MaterialWaterproofing Chemicals
CategoryCementitious Waterproofing
Grade StandardAnalytical Grade
FeaturesWaterproofing, Elastomeric, Seamless, Adhesion, Water Based and Easy to Apply
Shelf Life12 months
Storage ConditionModerate Temperature
Form Of ChemicalLiquid
Country of OriginMade in India

Acrylic polymer modified protective and waterproofing coating for concrete and masonry

Description

Brushbond comprises a two component acrylic polymer modified cementitious coating supplied in ready to mix kits.

Brushbond can be simply applied by stiff brush, roller, spray or trowel to obtain the desired texture.

Uses

To protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen,water and water vapour and can be used to produce vapour barriers . The product is also recommended to protect other cementitious substrates and masonry for new and existing structures. Typical applications include:

  Re-facing and reprofiling concrete & masonry surfaces

  Flexible coating to bridge shrinkage cracks

  Waterproof coating for water tanks and reservoirs

  Vapour barriers

  Robust coating which can withstand light pedestrian traffic

  Backing to marble and granite, preventing water ingress and alleviate staining

Advantages

  Excellent barrier to carbon dioxide, chloride ions and water

    Allows water vapour to escape from the structure

  Water proof - suitable for water retaining structures

  High resistance to the effects of long-term weathering, durable in all climatic conditions including UV attack

  Minimum surface preparation needed and low labour costs

  Flexible, with thermal expansion similar to concrete

  Covers honeycombed and pitted poured concrete effectively



Additional Information:

  • Delivery Time: Immediate
  • Packaging Details: 27 kg

View Complete Details

Yes, I am interested!

  • Fosroc Cebex 112
  • Fosroc Cebex 112
Interested in this product?
Get Best Quote

Fosroc Cebex 112

₹ 1,100/ KgGet Latest Price

Form of ChemicalLiquid
Usage/ApplicationMotar Cuts Cleanly from faces of brick block or stone work
Packaging Size20 Liter
BrandFosroc
CategoryWaterproofing Coating

Product Description:-
Cebex 112 is supplied as a light brown coloured liquid which mixes readily with water in any proportions. It is based on polymerised resins and is free from calcium chloride and similar salts.

Uses:-
To improve workability and trowelling properties of sand/cement mortar mixes during application. To increase the qualityof masonry and plastering.

Advantages:-

Eliminates use of lime in masonry applications. Saves storage space and failures due to unsound lime.

Improve moisture retention and bond strengths.

Make mortar frost resistant.

Highly economical. Maximum yield of up to 20%.

Improves harsh sands.

Can be used in coloured mortars.


Technical support:-
Fosroc offers technical support service to specifiers, endusers and contractors, as well as on-site technicalassistance in locations all over the country.

Limitations:-
Excess dosage of Cebex 112 will result in reduction of thefinal strength of the mortar. An overdose of double thethe recommended measure of Conplast P509 will result inincreased retardation of the initial set of the concrete. Theultimate strength of the concrete will not be affected and couldbe increased if advantage is taken of the increased workabilityby reducing water

View Complete Details

Yes, I am interested!

  • Fosroc Lokfix S/P
  • Fosroc Lokfix S/P
Interested in this product?
Get Best Quote

Fosroc Lokfix S/P

₹ 360/ kgGet Latest Price

Minimum Order Quantity: 10 kg

Form of ChemicalLiquid
Usage/Applicationgrouts are used for high strength corrosion resistant anchoring of bolts and bars from 12-51 mm
Packaging Size0,5&2,5 Ltrs
BrandFosroc
CoverageAnchoring Grouting
TypePolyester resin anchoring grout

Lokfix

Lokfix is a two-component polyester resin anchoring grout, meeting the requirements of BS EN 1504-6: Anchoring of reinforced steel bars.

Supplied in pre-measured quantities, the material cures quickly to give consistent, high performance anchorages. The two versions of Lokfix available are :

Lokfix S25 : Pourable grade, 25 minute gel time at 20°C for use in vertical down holes where the hole is 8 to 40 mm greater in diameter than the bar.

Lokfix P25 : Thixotropic grade, 25 minute gel at 20°C for use in overhead or horizontal holes where the hole is up to 25 mm greater in diameter than the bar. The thixotropic nature of Lokfix P25 reduces flow of grout out of the hole.

  • Rapid strength gain.
  • Vibration resistant.
  • Corrosion resistant.
  • Non-expansive.
  • Can be placed underwater

View Complete Details

Yes, I am interested!

  • Red Fosroc Lokfix E75, Packaging Size: 385 ml
  • Red Fosroc Lokfix E75, Packaging Size: 385 ml
  • Red Fosroc Lokfix E75, Packaging Size: 385 ml
Interested in this product?
Get Best Quote

Red Fosroc Lokfix E75, Packaging Size: 385 ml

₹ 530/ PieceGet Latest Price

Physical formLiquid
Packaging Size300 ml
Packaging Typecartridge

Lokfix E75
High performance pure epoxy 3:1 resin cartridge system, for anchoring reinforcement and fixings into a variety of substrates.

Main usesLokfix E75 is Fosroc’s solution for large and heavy duty anchoring into cracked and un-cracked concrete. It is also suitable for anchoring heavy duty rebar. It has industry leading strength with loads tested in dry, damp and flooded conditions. Comes with industry leading accreditation and design software.

For concrete (solid, porous and light) and solid masonry.

  • Accredited for use in dry, damp and flooded concrete substrates
  • Can be used with cracked concrete
  • Fixing of post installed reinforcement
  • Anchoring of threaded rod fixings
  • Anchoring of internal threaded rod sleeves
  • Internal, external and submerged conditions
  • Can be applied to almost any size of fixing
  • For horizontal, vertical and overhead application
  • Bonding and surface crack sealing applications

Advantages

  • High Bond strengths
  • No additional mixing equipment required
  • C1 and C2 seismic resistance*
  • Does not apply expansive force to the substrate
  • Fixings can be spaced closer together than mechanical anchors
  • Enables fixings closer to edges than mechanical anchors
  • Resistant to a variety of chemicals
  • Low VOC
  • Tested with diamond drilled bore holes
  • Fire rated up to 2 hours*
  • Waterproof, protecting the fixing from corrosion
  • Re-usable
  • Slow gel times allow for more complex procedures
Lokfix E75 is a two-component Epoxy anchoring material, supplied in 3:1 ratio side-by-side cartridges with a static mixer nozzle. When applied it sets and cures to firmly secure a variety of steel fixings into concrete and solid masonry substrates. Other grades of Lokfix are also available Lokfix E35 Resin anchor cartridge system based on styrene free Polyester for lightweight anchoring. Lokfix E55 Resin anchor cartridge system based on styrene free vinyl-ester for medium and heavy duty anchoring. Specification Clause The anchor grout shall be Fosroc Lokfix E75 cartridge system. The Anchoring grout shall comply with EDA 330087- 00-0601, systems for post-installed rebar connections, which supersedes EOTA TR 023. Standards Compliance Lokfix E75 complies with the following standards:European approval according to EAD 330499-00-0601, anchoring in cracked and un-cracked concrete (which supersedes ETAG 001 option 5) includes fire testing, threaded rod only, 120 minutes and C1 & C2 seismic approval.
European approval according to EAD 330087-00-0601, diamond drilled holes in un-cracked concrete, which supersedes ETA TR029 in concrete option 7.Émissions dans l’air intérieur : A+ LEED compliant VOC Level 

Important: extrude the initial material until the colour becomes red and consistent. This typically takes two or three full squeezes. Discard material that is streaky in colour. Insert the nozzle to the back of the hole and pump the Lokfix material gently pulling back until the hole is ¾ full. Ensure there are no voids in the resin. If the hole is too deep for the nozzle to reach the back, use a nozzle extender. In wide/overhead holes a piston plug will help reduce slump and ensure a void fee application. This is particularly recommended for fixings above 20mm diameter.

Observing the product gel time, insert the fixing into the hole using a gentle twisting motion. Ensure the fixing is inserted to the required depth and is held straight until the resin sets. There should be some extrusion of the Lokfix material from the hole which indicates that there is full embedment

Additional Information:

  • Packaging Details: 12 no in a box

View Complete Details

Yes, I am interested!

Interested in this product?
Get Best Quote

Fosroc Renderoc FC, Packaging Size: 25 kg

₹ 19/ KgGet Latest Price

Minimum Order Quantity: 5 Kg

Form of ChemicalPowder
Usage/Applicationconcrete admixture
Packaging Size25kg
BrandFosroc
CategoryCementitious Waterproofing
Coverage2000 kg/m3

Description

Renderoc FC cementitious fairing coat is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent cementitious fairing mortar. The addition of Nitobond SBR to the gauging water will further improve the performance characteristics of Renderoc FC. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives to provide a material with good handling characteristics, while minimising water demand. The product exhibit excellent thermal compatibility with concrete and is fully compatible with other Renderoc mortars and Dekguard coatings. Technical support Fosroc offers a comprehensive range of high-performance, high-quality construction products.

Advantages  

Easy to use - no independent primer or curing membrane necessary.   Excellent bond to the concrete substrate.   Pre-blend to overcome site-batched variations - only the site addition of clean water is required.   Contains no chloride admixtures.

View Complete Details

Yes, I am interested!

  • Fosroc Brushbond Rfx Waterproofing Chemical
  • Fosroc Brushbond Rfx Waterproofing Chemical
  • Fosroc Brushbond Rfx Waterproofing Chemical
  • Fosroc Brushbond Rfx Waterproofing Chemical
Interested in this product?
Get Best Quote

Fosroc Brushbond Rfx Waterproofing Chemical

₹ 95/ KgGet Latest Price

Minimum Order Quantity: 20 Kg

Product Brochure Watch Video

Usage/ApplicationBrushbond RFX is an high performance elastomeric cementitious coating
Packaging Size20kg
Coverage180 SQ.FT
TypePOWDER AND LIQUID WATERPROOFING
CategoryGREY
FeaturesExcellent, Crack Bridging and High Resistance
Country of OriginMade in India

Brushbond RFX is a two component acrylic polymer modifi ed cementitious coating which consists of Brushbond RFX powder and Brushbond RFX liquid acrylic emulsion. It requires only the addition of clean water at site to produce an easily brushable coating. Brush bond RFX can simply be applied by stiff brush, roller or trowel to obtain the desired thickness.

Uses 

Brushbond RFX is an high performance elastomeric cementitious coating used for waterproofi ng and to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen & water. Brushbond RFX is suitable for all types of structures including those in coastal environments. The product can be used on concrete, brick and blockwork substrates and is equally suitable for new and existing structures. The product is designed to reface and even out variations in concrete and masonry surfaces and bridge shrinkage cracks. It provides a seamless, fl exible waterproof coating suitable for water tanks, reservoirs, drainage culverts basements, roofs, toilets & wet areas. The product provides a tough durable water resistant coating which can withstand light pedestrian traffi c and also has excellent weather resistance for exterior applications. 


Advantages

Excellent barrier to carbon dioxide, chloride and sulphate ions. 

Allows water vapour to escape from the structure. 

Waterproof-suitable for water retaining structures. 

High resistance to the effect of long-term weathering, durable in all climate conditions including UV attack. 

Non toxic - ideal for potable water tanks. Flexible, with thermal expansion similar to concrete. Excellent bond to concrete and masonry. 

Good crack accommodation capacity. Minimum surface preparation needed and low labour costs



Additional Information:

  • Delivery Time: Immediate
  • Packaging Details: 20 KG

View Complete Details

Yes, I am interested!

  • Fosroc Conbextra Gp2 Grouting Material
  • Fosroc Conbextra Gp2 Grouting Material
  • Fosroc Conbextra Gp2 Grouting Material
  • Fosroc Conbextra Gp2 Grouting Material
  • Fosroc Conbextra Gp2 Grouting Material
  • Fosroc Conbextra Gp2 Grouting Material
  • Fosroc Conbextra Gp2 Grouting Material
  • Fosroc Conbextra Gp2 Grouting Material
  • Fosroc Conbextra Gp2 Grouting Material
  • Fosroc Conbextra Gp2 Grouting Material
  • Fosroc Conbextra Gp2 Grouting Material
  • Fosroc Conbextra Gp2 Grouting Material
  • Fosroc Conbextra Gp2 Grouting Material
Interested in this product?
Get Best Quote

Fosroc Conbextra Gp2 Grouting Material

₹ 16/ KgGet Latest Price

Minimum Order Quantity: 1 Kg

Product Brochure

Form of ChemicalPowder
BrandFosroc
Usage/ApplicationConstruction
Packaging Size25 Kg
CategoryWaterproofing Coating
ColorGrey
TypePowder
Packaging Type25 kg
Compressive Strength70 Mpa
Country of OriginMade in India

Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm.

Main uses

Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fi llers are designed to assist uniform mixing and produce a consistent grout.

Advantages
  • Gaseous expansion system compensates for shrinkage and settlement in the plastic state
  • No metallic iron content to cause staining Pre-packed material overcomes onsite batching variations
  • Develops high early strength without the use of chlorides
  • High ultimate strength ensure the durability of the hardened grout
  • Free flow ensures high level of contact with load bearing area


    Additional Information:

    • Delivery Time: 24 Hours
    • Packaging Details: 25 kg

    View Complete Details

    Yes, I am interested!

    Micro Concrete

    ₹ 15/ KgGet Latest Price

    Get Price & Details

    Get in touch with us

    Reach Us

    Sri Guru EnterprisesNo. 2, Velavan Nagar, Manapakkam Main Road, Near Allahabad ATM & Babuji Ashramam, Chennai-600125, Tamil Nadu, India

    Sagarika NP (Managing Director)

    View Mobile Number56% Call Response Rate

    Send SMS
    Send Email
    Send Payment
    Leave a Message, we will call you back!
    Send your enquiry to this supplier
    terms privacy policy

    We Accept Online Payments

    All Rights Reserved (Terms of Use)