X

Products & Services

+View All

Wall Coating Service

We are providing Wall Coating Service to our clients.

  • Starourea HBL Polyurea Based Waterproof Coating
  • Starourea HBL Polyurea Based Waterproof Coating
  • Starourea HBL Polyurea Based Waterproof Coating
  • Starourea HBL Polyurea Based Waterproof Coating
  • Starourea HBL Polyurea Based Waterproof Coating
  • Starourea HBL Polyurea Based Waterproof Coating
  • Starourea HBL Polyurea Based Waterproof Coating
  • Starourea HBL Polyurea Based Waterproof Coating
  • Starourea HBL Polyurea Based Waterproof Coating
  • Starourea HBL Polyurea Based Waterproof Coating
Interested in this product?
Get Best Quote

Starourea HBL Polyurea Based Waterproof Coating

₹ 750/ Square MeterGet Latest Price

Product Brochure Watch Video

BrandStanrose
Packaging Size4 Kg
Usage/ApplicationFloor, deck coatings etc.
Service ModeOffline
Service LocationPan India
Coverage Area2.25 kg/sqm for 1mm thickness
Mixing Ratio (Base :Hardener)76:24 by weight
Tensile strength (N/mm2)>4.5 N/mm2
Adhesion to concrete2.5 mPa
Pot Life (min) @ RT40 min
Chemical To Be UsedStarourea HBL Polyurea
Tear resistance (N.mm)D1 24
Shore Hardness A>55
Density g/ml (A+B)1.6
Viscosity (Base+Hardner)4000 cps
Elongation>550%
Crack Bridging> 2 mm
Drying Time at 30degC4 hrs. surface dry
Service Duration15-20 Days
Recoat time (hrs) at 30degC6-7 hours
Dry film Thickness (microns)Up to 1 mm in 2 coats with interval of min 6 hours
Solids>86%
Country of OriginMade in India

We are providing Starourea HBL Polyurea Based Waterproof Coating Service to our clients.

Starourea HBL is recommended for use in areas such as tank linings, water and waste water facilities, floor and deck coatings. Starourea is a 100%, fluid applied, hybrid polyurea in extended set version so as to apply the system by brush. It cures within 20 minutes to provide a tough, chemical and abrasion resistant coating. Though Starourea HBL cures slowly in the initial stages, it reaches the optimum properties of a standard polyurea coating once the cross linking is fully achieved.

Features
  • Performance features electric insulation coating
  • Zero VOC
  • Excellent adhesion
  • Excellent abrasion resistance
  • High thermal stability

Recommended Uses
  • Floor and deck coatings
  • Used to repair or touch up damaged polyuria coatings.
  • Repair systems
  • Joint sealants

Direction For Use Surface Preparation
  • Flat/slight sloppy concrete surfaces: The substrate must be dry (moisture content <5% recommended), clean, free of grease, loose particles, dust etc. Any existing cavities in concrete should be filled with the Repair Mortar / Sealants in advance. Intense wide cracks on the substrate must be filled with Hybrid PU sealants. For Concrete, Bituminous & Porous substrate Concrete, bituminous membranes or old waterproofing layers and other porous surfaces should be thoroughly scrapped or sanded followed by 1K PU Primer and 2K Starourea Membrane.
  • Substrate layers after application from bottom to top: Concrete, Single Component PU Primer (35- 40 mic) after 4 hours, 1st coat Two Component SB Starourea HBL (up to 500 microns DFT) after 6-7 hours, 2nd coat of Two Component Starourea HBL (up to 500 microns DFT) Ageing for minimum 7 days for any testing.

Primer
  • Application By brush/roller Topcoat needs to be applied within 4hrs of Primer application else sanding recommended if more than 4 hrs. Coverage consumption: 80gms/sqm for 40 microns in 1 coat, depends on porosity of concrete 2-3 coats may require. Application: Rollerable as per coverage given on clean and dry concrete surface with max. moisture content of 8%.

Starourea HBL Waterproofing
  • Mixing: 76:24 Part A (base) : Part B (hardener) by weight, mix till homogeneously formed.

Application By brush/roller/airless spray
  • Coverage consumption: Coverage Consumption: Approx. 2.25 kg/sqm for 1mm thickness in 2 coats with interval of 6-7 hrs.
  • Testing Conditions: Minimum 7 days RT ageing recommended for any film related testing such as mechanical, water ponding, chemical resistance etc.

Limitations
  • Highly influenced with climatic temp & humidity. Higher humidity may lead to faster drying and reduces pot life also and lower humidity would retard drying time with smooth flow. Starourea HBL chemistry is affected by humidity. The product should not be applied in temperatures less than 10°C or where the ambient relative humidity is greater than 85%.
Floor Joints
  • All existing expansion or movement joints should be followed through the new floor surface. Joint sealant & joint geometry should be compatible with the floor type used, intended exposure conditions and likely movement characteristics of the substrate - consult the local Stanrose Envirotech office for more details.

Cleaning
  • Starourea HBL can be removed from tools and equipment by using Stanrose EPT immediately after use. Any hardened material will need to be removed mechanically.

View Complete Details

Yes, I am interested!

  • Epoxy Wall Coating Services
  • Epoxy Wall Coating Services
  • Epoxy Wall Coating Services
  • Epoxy Wall Coating Services
  • Epoxy Wall Coating Services
  • Epoxy Wall Coating Services
  • Epoxy Wall Coating Services
  • Epoxy Wall Coating Services
  • Epoxy Wall Coating Services
  • Epoxy Wall Coating Services
Interested in this product?
Get Best Quote

Epoxy Wall Coating Services

₹ 160/ sq ftGet Latest Price

Product Brochure Watch Video

Usage/ApplicationWall Coating
Service ModeOffline
Service LocationPan India
Chemical To Be UsedStaro-Wallguard PU IWC
Cured FilmFlexible, Elastic, Tough
Flash PointNon Inflammable
Shelf Life18 Months
Service Duration10-12 Days
Solid Content50% +/-1
Hardening TimeApprox 48 Hours

We are providing Epoxy Wall Coating Services to our clients.

Staro-Wallguard PU IWC is water based aliphatic resins and exhibits enhanced resistance to UV. without cracking, peeling or turning yellow. It is further cross linked and has good resistance to alkalis and mild acids and solvents. Staro-Wallguard PU IWC has an astronomically low dihydrogen monoxide vapour absorption unlike acrylics and it does not turn soft even under protracted immersion in dihydrogen monoxide and at the same time has excellent breath facility due to invert osmosis sanctioning dihydrogen monoxide trapped in the substrate to evaporate. It is single pack, very economical. having excellent water resistance, weathering resistance, extra mundane adhesiveness, expeditious drying and very good breathing properties. 

View Complete Details

Yes, I am interested!

  • Exterior Wall Coatings Service
  • Exterior Wall Coatings Service
Interested in this product?
Get Best Quote

Exterior Wall Coatings Service

₹ 15/ sq ftGet Latest Price

Product Brochure Watch Video

Usage/ApplicationExterior Wall Coating
Service ModeOffline
DFT At 0.9 Kg/m2300 Mu
Service LocationPan India
Service Duration15-20 Days
Volume Solids46%
Touch Dry1 Hour at 25 Deg C
Recoating Time4 Hours at 25 Deg C
Chemical To Be UsedStaro-Wallguard Ultra Protek
ConsistencyThick Paste
Density1.35 +/- 0.05 Kg/l
Application Temperature5-40 Degree C

We are providing Exterior Wall Coatings Service to our clients.

Staro-Wallguard Ultra Protek is a tough high grade, solvent free, single component; acrylic based product for the protection of concrete. mortar, masonry, natural stone and wood against aggressive environmental attack. Staro-Wallguard Ultra Protek also achieves high aesthetics for quality structures. Staro-Wallguard Ultra Protek is available in a wide range of colours. Stare-Wel!guard Ultra Protek is an Ultra Durable state of the art exterior emulsion paint formulated with engineered synergy of pure acrylics latex. Its unique surface cross-linking feature coupled with Nano performance enhancers contribute to its outstanding mechanical, ant-carbonation properties with long lasting durability in severest climatic conditions. 

View Complete Details

Yes, I am interested!

Get in touch with us

Reach Us

Stanrose Envirotech India Private LimitedG-17/8, MIDC, Tarapur Industrial Area Near National Pharmaceuticals, Palghar, Opposite Lalit Hotel, Boisar, Palghar, Thane-401506, Maharashtra, India

Rajat Chakraborty (Managing Director)

View Mobile Number82% Call Response Rate

Send SMS
Send Email
Send Payment
Leave a Message, we will call you back!
Send your enquiry to this supplier
terms privacy policy

We Accept Online Payments

All Rights Reserved (Terms of Use)