X
Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Liquid Waterproofing

 

Shalicrete Polymer Emulsion
Interested in this product?
Get Best Quote
Description
ShaliCrete is a multifunctional acrylic polymer emulsion for enhancing properties of concrete,
mortar, grout, cement slurry etc. through better bonding, waterproofing and improvement in several
other properties. ShaliCrete is used for permanently bonding plaster to ensure durable finish of
exterior walls, bonding new concrete to old concrete, making mortar for repairing and for
waterproofing. ShaliCrete is highly durable in wet condition as well.
Characteristics
Appearance Free Flowing white
liquid dries to a
colourless coating
Flexural Strength, kg/cm2 Refer
chart
Specific Gravity @ 27 OC 1.01
Bond Strength Refer chart Solid Contents 29 ± 2
Theoretical Coverage, m2/kg * Refer chart Resistant to UV Excellent
* Depending upon surface condition.
Application
• Toilets, sunken slabs, kitchen, sewers, aquariums and terrariums.
• Repairing walls, planters and small concrete terraces.
• Durable and aesthetic exterior finish with cement paint.
• Repair mortar for precast structural concrete members, toppings, patches, cracks etc.
Advantages
• Easy to use.
• Improves bond strength, facilitating tough and hard wearing surface.
• Allows trapped vapour to escape thus preventing peeling / blistering.
• Reduces cracking through increased mortar flexural strength.
• Increases mortar, wears resistance under rubber wheeled traffic.
• Increases mortar tensile strength.
• Offers greater impact resistance.
• Reduces permeability.
• Non-flammable and does not give toxic gases when exposed to fire.
• Not harmful to the health of the workman.

View Complete Details

Yes, I am interested!

Shalicryl 215 Waterproofing Coating
Interested in this product?
Get Best Quote
Description
ShaliCryl® 215 is single component, UV resistant, unique elastomeric,
high build exterior waterproofing coating based on a revolutionary
acrylic polymer with quick-set capabilities to resist moisture attack.
Besides inherent waterproofing properties, ShaliCryl® 215 provides
durable, flexible, water resistant and water repellant properties.
Having an unique UV cross-link curing mechanism, ShaliCryl® 215
becomes more durable with age.
ShaliCryl® 215 is easy to apply, environmentally safe, non-polluting
green product forms a thick impermeable layer with a high crack
bridging property of upto 2 mm.
ShaliCryl® 215 is available in white and dark bases and well as factory made wide range of
attractive colour.
It conforms to ASTM D-6083.
Characteristics - Physical
Appearance Wide range of
coloured
viscous liquid
Appearance after drying Coloured film
with sheen
Application Temperature OC > 5
UV Resistance Excellent Specific Gravity 1.30
Solid, % 58.00 Viscosity, cps at 30 OC 20000 ± 2000
DFT, micron 200 Theoretical Coverage, m2/L * 3.25
Accelerated Weathering
Test. Q Panel, ASTM D G 23
Type D
1000 hrs - No
defects
Dust pick up resistance Good
Rapid Chloride Permeability
ASTM C 1202 - 97
Very low
* Depending upon surface condition.
Characteristics - Technical
Property Standard Results
Elongation, 14 days, % ASTM D-6083 300
Tensile strength, 14 days, MPa, ASTM D-6083 0.72
Hardness, 14 days /Shore A ASTM D-2240 70 - 72
Adhesion strength, MPa ASTM D-4541 1.5 MPa -
Concrete failure
Application
??? Exterior waterproofing UV resistant elastomeric coating with 200 micron impermeable film.
??? For UV protection layer over Liquid Membrane, you may use ShaliCryl® 215.
Advantages
??? 200 Micron impermeable Coating.
??? High Crack Bridging Property
??? Elastomeric UV Resistant Coating.
??? Higher Durability.
??? Green Product.

View Complete Details

Yes, I am interested!

ShaliFlex WB Elastomeric  Epoxy Flooring
Interested in this product?
Get Best Quote
Description
ShaliFlex® WB is single component elastomeric, solvent free polymeric dispersion for wet area
waterproofing. ShaliFlex® WB is elastomeric in nature when cured and provides excellent
waterproofing for various applications.
Characteristics - Physical
Appearance Viscous Emulsion Pot life, minutes @ 20 OC 60
Density, kg / L @ 30 OC 1.26 Application Temperature, OC 5. to 40
Theoretical coverage kg / m2
for 0.8 mm * in two coats
1.3 Service Temperature, OC -10 to + 45
Recoatable, hr
Open to tiling
Full Cure
6
48
Drying time, hr @ 20 OC
Tack free
Trafficable
4
6
* Depending upon surface condition.
Characteristics - Technical
Property Standard Result
Elongation, % @ 20 OC ASTM D-412:98 135
Tensile strength, MPa ASTM D-412:98 0.95
Hardness Shore A ASTM D-2240 45
Crack bridging, mm @ 0.8 mm DFT ASTM D-836 > 0.75
Application
Waterproofing of sunken floors, bathroom, kitchen, Service area.
Waterproofing of Lift base floor.
Facade damp proofing.
Under tile waterproofing.
Advantages
Can be applied on damp surface.
Water based product, environment friendly.
Non toxic, VOC free.
Cold applied, seamless and joint less coating.
Excellent Impermeability.
Flexible.
Application Methodology
Substrate Preparation
Remove dust, flakes, or other foreign particles by air jet and clean the surface
mechanically to make it smooth.
Remove any oily patches, visible curing compound using detergent solution followed by
water wash and dry it.
Highly uneven surface should be leveled with ShaliFloor SLUL 1C.
Repair all cracks in the substrate properly.
Plaster, render must have minimum compressive strength of 3 MPa.

View Complete Details

Yes, I am interested!

ShaliPlast LW

ShaliPlast LW

Get Latest Price

Ask for Details
Tell us what you need, and we’ll help you get quotes
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Tell us what you need, and we’ll help you get quotes
I agree to the terms and privacy policy