X
View Mobile Number
Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Non Shrink Grout

We are a leading Wholesale Distributor of Epoxy Modified Sealant and Non-Metallic Floor Hardener from Ahmedabad, India.

Epoxy Modified Sealant
Interested in this product?
Get Best Quote

Epoxy Modified Sealant

Get Latest Price

ShaliSeal EMS (formerly known as ShaliEMS 700) is a two component, semi-rigid epoxy for filling control and construction joints in industrial concrete floors. This product supports the joint edges and reduces spalling of the edges caused by wheel traffic. ShaliSeal EMS has been designed for use under ACI 302, Section 4.10 recommendations for epoxy joint fillers.

Characteristics

Pot Life at 24 C, minuten: 15
Compressive Strength, 72 hrs: 2
Elongation, 7 days: 210 kg/cm
Water Absorption after 72 hrs: 55 %
immersion: 1.1 %
Shore A Hardness: > 100
Tack free time @ 24 C, hrs: 12
Tensile Strength, 7 days: 46 kg/cm
Chemical Resistance after 72 hrs, 24 C
CaCl2 (10%): Excellent
Caustic (10%):Excellent
Muriatic Acid (10%): Excellent

Application

Concrete construction and control joints in industrial floors
Crack filler repair for old floors.

Advantages

Semi-flexible formula that allows for limited temperature and humidity movement of concrete.
Tough performance reduces floor joint repairs and maintenance.
Suitable for filling cracks in older floors to reduce the rate of deterioration

Specifications/Compliances

ShaliSeal EMS is a semi flexible joint filler designed to comply with ACI 302 recommendations regarding control and construction joints.

Application Methodology

Ensure that the groove to be treated is free from oil, grease, paints or any other contamination.
Any dust or loose particles has to be removed by air pressure or by any other suitable method
Grooves should be clean and dry prior to the application of ShaliSeal EMS.
Masking tape has to be applied near the edge of the groove to get a straight neat finish.
Mix component A and Component B separately. If settling is observed in the Comp A and
Comp B, loosen the settled material with the help of hand stirrer followed by power driven stirrer for quick homogenous mixing. Mix Comp B gradually into the Comp A under continuous stirring.
After ensuring a homogenous mix, pour the mixed material into the groove.
Joints should be overfilled and immediately cut with a razor knife or ground flush with the floor. If ShaliSeal EMS has completely hardened, a heat flame may be used to soften the material for easier removal.
ShaliSeal EMS requires no special curing instructions. The product will cure within 24 hrs of placement @ 21 C. Lower temperature will slow the curing rate.

Cleaning

Tools, equipment and general clean-up can be done with Xylene or Toluene

Limitation

Based on ACI 302 recommendations, epoxy joint filler should be applied 3 to 6 months after construction, the later the better.
Do not use ShaliSeal EMS as an expansion joint sealant.
Use only at temperature above 4 C
Contact surfaces must be cleaned and dry.

Health & Safety

The product should not come in contact with the skin and eyes, or be swallowed.
Ensure adequate ventilation and avoid inhalation of vapours as some people are sensitive to resins, hardeners and solvents.
Wear suitable protective clothing, gloves and eye protection.
In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area.
In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.
If swallowed seek medical attention immediately-do not induce vomiting.

Packing

Available in 1/2 kg Unit contains both hardener and resin packed in 12 kg carton.

Storage

Store in cool dry place under the shed away from heat.

Shelf Life

6 months in original unopened sealed condition.

View Complete Details

Yes, I am interested!

Non-Metallic Floor Hardener
Interested in this product?
Get Best Quote

ShaliFloor NM (formerly known as Shalimar Surflex) is a quartz-silica mixture of finely graded non-metallic aggregates, plasticizer and cement binder. It is an economical concrete floor hardener recommended for both interior and exterior use. It is particularly valuable because of its non-rusting characteristics when floors will be frequently wet.


Characteristics

  • Physical Appearance : Cementitious powder

  • Abrasion Resistance : Treated concrete will give 150 - 225% better abrasion resistance then control concrete

  • Compressive strength– 28 days : 60 – 70 N/mm2
  • Coverage Light Traffic : 3.5 – 4.0 Kg/ m2
  • Coverage Medium Traffic : 4.5 – 5.0 Kg/ m2
  • Coverage Heavy Traffic : 6.5 – 7.0 Kg/ m2


Application

Shalimar Surflex is used whenever floor surfaces will be subjected to light-to-heavy usage, whenever abrasion resistant or non-rusting floors are specified i.e. car park areas of commercial and public buildings, food processing & electronics industries, breweries, restaurants, diaries, automobile showrooms and service centers, warehouses, loading docks and high traffic aisleways.

Advantages

  • Hardens concrete in one economical operation.

  • Wear resistant-use of hard and properly graded aggregates increases the wear resistant over plain concrete floors.
  • Can be used in conjunction with vacuum dewatered concrete at maximum of 5 kg / Sq.M spread rate.
  • Non-rusting materials make it possible to use Shalimar Surflex outdoors as well as indoors.
  • Special dispersing agent contained in Shalimar Surflex makes it possible to incorporate
  • Shalimar Surflex into the surface of low slump concrete resulting in exceptionally high surface strengths for maximum wear resistance.


Health & Safety

  • Use mask, nose cover and hand gloves during application.

  • Clean hands with soap water after application.
  • Ensure adequate ventilation and avoid inhalation of dust.
  • Avoid contact with skin / eyes. In case of unlikely contact with eyes, rinse immediately with plenty of clean water, then cleanse with soap and lukewarm water and seek medical advice.
  • Do not use solvent to clean the contacted area.
  • Prevent swallowing. In case of unlikely swallowing, seek medical attention immediately. Do not induce vomiting.


Packing

  • Available in 50 Kgs bag.


Storage

  • Store in a cool dry place under shed away from heat.

Shelf Life

  • 9 months in original unopened sealed condition.



View Complete Details

Yes, I am interested!
Tell us what you need, and we’ll help you get quotes
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Tell us what you need, and we’ll help you get quotes
I agree to the terms and privacy policy