Sun Enterprise

ShaliSeal PS PG (Pouring Grade) is based on liquid polysulphide polymers which adhere to most
of basic civil engineering materials like cementitious substrates, aluminum, glass, wood, mild steel
etc. The product is used for sealing expansion joints, door-window surrounding joints & floor
concrete to wall masonry separation joints etc. After mixing the base component & curing agent in
given proportion rubber like material in pourable consistency is formed. It conforms to BS 5212:
1990 Part I -Type F and Type FB (Flame and Fuel Resistance). Also complies IS 12118 Part 1 –
1987.

Additional Information:

• Item Code: PSPG-02

Dr. Fixit Fastflex is a two component cementitious coating, composed of high quality cement, properly
selected & graded fillers, additives and liquid polymer. It is suitable for achieving waterproofing for the water
retaining structures such as swimming pools, water tanks, reservoirs, other wet areas, etc, because it provides
strong bonding, good waterproofing and excellent resistant to hydrostatic water pressure by forming highly
elastic seamless coating over the applied concrete or masonry surfaces.

ShaliTex Expansion Joint Board is cane fibre soft board impregnated with Special Grade of
Bitumen. It is a perfect base material for expansion joint filers. The board's compression and
recovery characteristics conform to the U.K., U.S.A. and Indian Standards much above the
required averages.
ShaliTex Expansion Joint Board displays excellent resistance to compression, with outstanding
recovery characteristics. The boards are environment friendly as opposed to the environment
destroying thermo Cole/plastic expansion joint boards.

ShaliUrethane LHM is a single component modified polyurethane elastomeric liquid
membrane for waterproofing treatment. It forms a seamless membrane by reaction with
atmospheric moisture. It conforms to ASTM C-898-2009, C-836-2012.
ShaliUrethane LHM is used for horizontal / vertical applications. For horizontal or vertical
applications, please use horizontal or vertical grades of ShaliUrethane LHM respectively.

ShaliUrethane BTD is high performance water based cold applied elastomeric coating. This
unique single component system is ready to use material based on PU modified bitumen emulsion.
It conforms to ASTM C-836.

Dr. Fixit Raincoat is composed of high quality acrylic emulsion polymer, light fast & weather durable pigments,
properly selected & graded fine fillers, additives biocides.
It is used as a waterproofing & protective coating for exterior walls of the buildings because
it forms higher film thickness, has excellent flexibility, breathing properties, water resistance, crack-bridging
ability, weathering durability and an excellent resistance to the growth of microorganisms.
Areas of Application
All types of exterior masonry surfaces, concrete, cement sand renderings, etc.


Applicable on asbestos sheets.

Features & Benefits

• Waterproofing - Higher film thickness provides crack bridging ability waterproofing properties & resistance to
• cracking.
• Flexibility - Flexible and covers hairline cracks(upto 0.5 mm) effectively thus prevents ingress of water.
• Toughness - Tough films withstands wind driven rain.
• Elastomeric - High elasticity easily withstands stress caused by thermal expansion & contraction (>100%
• elongation at 110-120 micron DFT).
• Ready to use – No dilution is required hence ensures desired film thickness built-up without affecting the
• performance.
• Microbial resistance – Resistance to fungus and algae hence maintains the aesthetic value.
• UV resistant – Resistance to UV (Sun light) hence coating has longer life.
• Low dirt pick up – Very low dirt pick up & can be cleaned easily hence maintains the aesthetics.
• Breathability - Permeable to water vapour.
• Ease of application – User friendly, easily applicable by brush, roller or spray.
• Non toxic - It is Eco friendly.

Dr. Fixit Newcoat is a heavy duty terrace waterproofing system, composed of specially developed highly
elastic & resilient acrylic polymers, properly selected & graded fillers, lightfast & weather durable pigments,
micro-fibres, additives & best quality fungicidal in water medium. It is used as a liquid applied waterproofing
membrane for all types of building terraces. Dr. Fixit Newcoat is a three-layer system with coats in different
colours ensuring proper build-up of the thickness, making it a reliable waterproofing system.
Areas of Application
Building roofs / Terraces– Flat & slope.

Over existing cementitious waterproofing treatments like brick-bat coba, concrete screeds,
acrylic coatings, etc.

Features & Benefits

• Water proofing- Tough & elastic films provides excellent W/P
• Film thickness – Provides higher dry film thickness of 1 to 1.25 mm in three coat application.
• Crack bridging - Bridges cracks upto 2 mm width.
• Application advantage - No need to remove existing BB coba, Plaster, concrete surface.
• Strength - Higher tensile strength, tear resistance & bond strength with cementitious substrates.
• Resilience – Forms highly elastic & resilient coating so helps to withstand the structural movements.
• Durability – Resistant to UV & weather conditions.
• Abrasion resistant – No additional protective coating is required for roof subjected to foot traffic.
• Ease of application – Can by applied by brush & roller easily.
• Light weight – does not add extra weight over the roof.
• Non-toxic – Eco friendly
• Breathability – It is Breathable.

KEM PROOF 87 is an elastomeric coating based on selected acrylic co-polymers. When applied, it
cures to form a durable, protective, waterproof membrane. It is applied by brush or roller. It can be applied
on concrete, cement board, wood, brick, stone and tiles. It is a single-component emulsion containing
inert pigments and has a brushable consistency.

PRODUCT FEATURES:

• Good resistance to UV and atmospheric gases and salts ensures excellent durability
• Good tensile strength and elongation ensures crack bridging and movement accommodation
• Highly resistant to water

Additional Information:

• Item Code: EC-87

ShaliSeal PU 2K (formerly known as ShaliSeal PU II) is a coal tar free modified two part
polyurethane sealant which cures to form a durable, flexible, watertight bond with most building
materials and is capable of accommodating, dynamic joint movement. It is available in two forms :
Gun Grade (GG) and Pouring Grade (PG).

Additional Information:

• Item Code: SSP-02

ShaliUrethane LM is a single component modified polyurethane elastomeric liquid, which forms
ultra violet resistant seamless UV resistant waterproofing membrane, through curing in reaction
with the atmospheric moisture. This conforms to ASTM C-836 and ASTM C-898

Dr. Fixit Pidiseal PS is a two-part elastomeric sealant based on a liquid polysulphide polymer, which when mixed
with accelerator (curing agent) cures by chemical reaction to form a tough, flexible rubber seal. It is used for
sealing of construction, expansion & contraction joint application to seal the joint hermatically. It has excellent
tensile modulus, elongation, bonding, UV ozone water resistance and weathering durability.

KEM BRUSH 88 is a high performance, two-component elastomeric cementitious waterproof coating for
concrete, slabs and masonry. It also acts as surface protection for reinforced concrete. Designed for
waterproofing hydraulic projects, it is a specialty treatment coat for internal and external waterproofing.

PRODUCT FEATURES:

• Is an excellent impermeable coating, forms flexible cementitious membrane
• Excellent adhesion with all cementitious substrates
• Highly durable and economical
• Flexible cement bound slurry for minor crack bridging sealing in concrete and plasters
• Used as surface protection for reinforced concrete
• Can be applied on both sides of water pressure
• Tools and equipments can be washed easily with water
• Available in brushable consistency
• Allows water vapour to escape from the substrate
• Non-toxic, non-hazardous and non-flammable hence suitable for water tanks
• Suitable for all any type of weather conditions including UV resistant
• Surface preparation is very minimum and hence low labour cost Protects against acid gases, chloride ions,
• oxygen and water

Additional Information:

• Item Code: KM-88

KEM Joint PU 100 is a single component
polyurethane based elastomeric sealant which
cures under the effect of atmospheric humidity to
form a flexible and resistant joint with very good
adhesion on most materials.

Kem Joint PG is two component system, consists of a Base compound and Accelerator (Curing
agent) when the two components are mixed together, the chemical reaction starts and forms a tough,
flexible rubber seal with excellent adhesion to concrete, masonry, wood, glass, aluminum, acrylic and
PVC plastics with excellent movement accommodation.

ShaliTex® Sealing Compound is bitumen based sealant for concrete joints resistant to high
temperature variations providing waterproof sealing for all type of horizontal joints. It is
conforming to IS 1834 – 1984, Grade A specification.

Additional Information:

• Item Code: SC-01

ShaliTex® Sealing Compound is bitumen based sealant for concrete joints resistant to high
temperature variations providing waterproof sealing for all type of horizontal joints. It is
conforming to IS 1834 – 1984, Grade A specification.

Additional Information:

• Item Code: SC-02

ShaliSeal PS GG is based on liquid polysulphide polymers, which adhere to most of basic civil
engineering materials like cementitious substrates, aluminium, glass, wood, mild steel etc. The
product is used for sealing expansion joints, door-window surrounding joints & floor concrete to wall
masonry separation joints etc. After mixing the base component & curing agent in given proportion
rubber like material is formed. It conforms to BS 5212: 1990 Part I -Type F and Type FB (Flame
and Fuel Resistance). Also complies IS 12118 Part 1 – 1987.

Additional Information:

• Item Code: SPG-01

KEM PROOF 86 is a high quality, acrylic emulsion based coating. It is elastomeric in nature and has good
resistance to weather and sunlight.

PRODUCT FEATURES:

• Capable of resisting movements in structures and has good crack bridging and water proofing properties
• due to its good film thickness
• Excellent elasticity (<100% at 100 - 125 microns DFT). At the same time, it is tough enough to withstand
• heavy rains
• Has longer service life due to excellent UV resistance
• Good resistance to fungus and algal growth
• Good breathability and permeability to water vapour
• Non-toxic coating
• Low dirt pick up due to low tack-free time
• Ready to use and easy to apply using brush roller and spray
• Ensures desired thickness as there is no need for additional water for dilution

Additional Information:

• Item Code: CKP-86

Dr. Fixit Pidiprime A is a one pack ready to use solvent containing solution of polymer. It enhances the
bonding/adhesion of Polysulphide Sealants with metal, glass, wood and cementitious surfaces. It is not
recommended for application of sealants in areas where sealant remains in completely immersed in water.

Fiberglass Net

Additional Information:

• Item Code: EF05

Epoxy Grouting Services

Additional Information:

• Item Code: EG03