Nature of Business
Year of Establishment
Manufacturer of hydraulic impact hammers, trench shoring systems, site road system, rapid impact compaction.
Designed in line with European Standards, WICE Hammers are available in ram weight from 0.8mt - 22mt with maximum energy per blow - 23940nm - 733000nm
Advantages of Wice Hammers:
Light weight, low fuel consumption and simple regulation of impact energy.
Hydraulic Impact Hammers for ofshoare appliation from IHC Hydrohammers, Holland
Driving Casings, Pre-cast piles, Castin- situ piles, Sheet Piles
Rockbreaking, Raked piles, Underwater operations
Noise free models available for lownoise operation
Highly suitable for Off-shore piling Jobs
Crane hanging as well as excavator mounted hammers
Maximum blow energy from 30kNm - 2500kNm
Ram weights from 1.5mt - 115mt.
Accurate electronic control of stroke
Acting on 2G force
Damen Dredging Equipment developed, in cooperation with various dredging contractors, a series of multi-functional submersible dredge pumps, the DOP® pumps.
The heart of this versatile dredge tool is a wear-resistant, compactly built dredge pump with a maintenance-friendly seal. All wear parts can easily be replaced and, depending on the job, supplied in different materials varying in hardness, toughness and price.
Damen Dredging Equipment has more than 60 years of experience as a manufacturer and designer of dredging equipment. This knowledge enables us to design modifications for the DOP® pump to suit your requirements as well as assist and advise you on the operation of the DOP® pump.
SK 135 SR
Bucket Capacity Range - 0.57 m3 to 0.70 m3
Operating weight range - 13800 Kgs
SK 210 LC-8
Bucket Capacity Range - 0.51 m3 to 1.3 m3
Operating weight range - 20600 Kgs
SK 350 LC-8
Bucket Capacity Range - 1.2 m3 to 2.3 m3
Operating weight range - 34300 Kgs
SK 480 LC-8
Bucket Capacity Range - 1.4 m3 to 3.8 m3
Operating weight range - 46400 Kg - 47300 Kgs
Forged and cast components are used throughout. The arm tip's cross-sectional coefficient is 15 % higher that previous models, giving the arm the same strength as the 3-faced reinforced arm that was offered only as an option before. The strength of the boom foot has also been increased, by 18 %. (SK200)
Vibratory Hammers for Cranes and Excavators, from ICE bv, Holland
Pile driving and extraction.
Sheet piling, tube piling, Pre-cast piles, deep soil compaction, Raker piles
Trench compaction, drive fence poles, timber and wooden piles.
Resonance free models available for noiseless operation.
Centrifugal force from 645 kN - 5000 kN
Eccentric moment from 23kgm - 220kgm
Can drive Casings of dia of 450mm - 3600mm
Centrifugal Force 230kN - 1015kN
Eccentric moments 2.2kgm - 18kgm
Suitable for excavators from 15 tons to 60 tons
Sany manufactures a wide range of piling rigs to meet the needs of modern foundation Contractors:
Hydraulic bored piling rigs for large diameter piles of upto 2400mm dia, from 25 Ton up to 170 Ton operating weight
Equipment for diaphragm walls
Equipment for special foundation techniques like CFA, displacement piles
Particulary innovative machines featuring a frameand an exclusive mast support system designed by the Sany Design Workshop. The system makes the mast extremely stable and rigid and yet transportation is simple.
Thanks to hi-tech engineering, the machines are already at the top of their category worldwide.
The product range of IHC Fundex includes the foundation products such as Hydraulic foundationLarge Foundations Rigs machines, Rotary heads, Ring vibrators and Power packs. IHC Fundex also makes special machines, built as per customer requirement. The experience of IHC Fundex on certain soil displacement drilling equipment is unique in the whole world.
FN 14 Hydraulic foundation machine: Multipurpose foundation machine with a leader length of 24 mtrs. Suitable for driving of precast piles, steel tubes, sheet piles and for drilling of CFA piles.
F12SE Hydraulic foundation machine: Multipurpose foundation machine with a maximum leader length of 37 mtrs. It is suitable for pile driving and soil displacement drilling. The maximum pile length with drilling is up to approximately 29 mtrs.
F15 Hydraulic foundation machine: Multipurpose foundation machine with a maximum leader length of 46 mtrs. It is suitable for pile driving and soil displacement drilling. The maximum pile length with drilling is up to approximately 40 mtrs.
TUBEX TBX 35 Hydraulic foundation machine: Unique machine designed for soil displacement drilling in limited space and height. Sound isolated power pack with Deutz diesel engine is counterweight as well. The maximum torque of the integrated rotary head is 350 kNm.
Reliable and proven hydraulic vibroflottation equipment for making stone columns and deep soil compaction.
Ground treatment with the VibroSTA method meets a wide range of load bearing capacity and reliable ground improvement requirements and provides an economical alternative to more expensive deep foundation technologies
Suretech Infrastructure Private Limited
W101/6, Anupam Garden Lane-6, Sainik Farm, Anupam Garden,
Mumbai-110068, Maharashtra, India