SVB Interior

Supply and Installation of Factory Made Modular Wardrobe ready to assemble type, self-standing for Faculty
Residences as per schematic drawings. Vendor shall prepare a detailed shop drawing considering actual site
dimensions with provision for following items:
(a) Carcass , shelves : Made of 18 mm thick Marine plywood confirming to IS 710 with 0.8 mm balancing laminate
of selected shade on both sides pressed on hot-press with approved adhesive. All the edges must be sealed with
0.8 mm PVC/ABS edgebands, glued on PC controlled automatic Edgebanding machine with pre-milling operation
using hot-melt glue. For require quality, plywood must be calibrated ply for uniformity and better bonding with
lamination and edgebands must be applied with pre-milling function on.
(b) Shutters: Made of 18 mm thick Marine plywood confirming to IS 710 with 1.0 mm thick high-pressure laminate
sheet pressed on a hot-press with approved adhesives, of plain / wood grain in gloss / matt / suede finish with high
density protective surface layer conforming to IS : 2046 .All the edges must be sealed with 0.8mm PVC/ABS
edgebands, glued on PC controlled automatic Edgebanding machine with pre-milling operation using hot-melt glue.
For require quality edgebands must be applied with pre-milling function on.
(c) Back Panel and drawers: Made of 12 mm thick Marine plywood confirming to IS 710 with 0.8 mm balancing
laminate of selected shade on both sides pressed on hot-press with approved adhesive. Back side of cabinet in
contact with wall plaster/ otta Floor/ bottom of loft slab to be applied with wood primer.
(d) Knock-down Joining System (KD fittings): 8 mm x 45 mm concealed bolt with 15 mm eccentric cranks, 8 mm
jute dowels, 75 x 50 mm M.S. brackets, etc. completed with drilling and fixing. Drilling and boring work is done on
CNC Multi-drill machine in KD-32 system. All mounting holes are notched in all axes simultaneously in single
reference. The maximum span between two adjacent holes should not be more than 96 mm. All panels should be
interchangeable to facilitate assembly at site. Panels cannot be connected by brackets or screws.
(e) Hardwares: All the Hardware fittings of approved make S. S. 304 grade Satin finish/Brush Finish, drawer
channels of approved make, SS hanger road with sockets,locks, magnets etc. all accessories including necessary
screws, nuts bolts of matching quality. The Shutters shall be fixed with Soft Close Clip On Hinges, The Drawer
Channels shall be corrossion resistant and on ball bearings.
Manufacturer shall prepare one full scale mock up sample as per the drawing and get the same approved by
Engineer In Charge / Architect before doing the final istallation for other uniots. Necessary modification in the full
scale mock up samples shall be made, if any required by the Engineer In charge/Architect, without any extra cost.(
Cost of supplying of all hardwares fittings,channels and accessories etc. are included in the rates of relevant items
). The Rate has to be quotd for the following wardrobes:

 We  are Desginer and service provide All catagories  interior Works   False Ceiling, PVC False celling,Gypsum Partition,Wall Partition, Modular Kitchen, Wooden Wardobe,Wooden Flooring, etc.,,Supply and finishing of Waldrop using 18mm MDF board with  necessary materials

We  are Desginer and service provide All catagories  interior Works   False Ceiling, PVC False celling,Gypsum Partition,Wall Partition, Modular Kitchen, Wooden Wardobe,Wooden Flooring, etc.,,

Size: Determine the appropriate size of the TV unit based on the size of your TV and the available space in the room. Consider leaving some extra space around the TV for aesthetics and ventilation.

Material: Choose a material that suits your style and durability needs. Common options include wood (such as oak, walnut, or teak), MDF (medium-density fiberboard), metal, glass, or a combination of these materials.

Design: Consider the design elements such as the overall style (modern, contemporary, traditional, etc.), number of shelves or compartments for storage, open or closed design, presence of drawers or cabinets, and any additional features like integrated cable management.

Color and Finish: Select a color and finish that complements your existing furniture and decor. Popular choices include natural wood finishes, painted finishes in various colors, or laminates for a sleek look.

Functionality: Ensure that the TV unit is functional for your needs. It should have enough space to accommodate media devices such as cable boxes, gaming consoles, and DVD players. Additionally, consider if you need space for storing DVDs, books, or other items.

Accessibility: Check that the TV unit allows for easy access to ports and connections on the back of your TV and media devices. It should also provide convenient access to storage areas.

Weight Capacity: Verify the weight capacity of the TV unit to ensure it can safely support your TV and any additional equipment or items you plan to place on it.

By considering these specifications, you can find or create a TV unit that meets your requirements and enhances the functionality and aesthetics of your living space.

Additional Information:

• Production Capacity: New
• Delivery Time: i week
• Packaging Details: free

We  are Desginer and service provide All catagories  interior Works   False Ceiling, PVC False celling,Gypsum Partition,Wall Partition, Modular Kitchen, Wooden Wardobe,Wooden Flooring, etc.,,

We  are Desginer and service provide All catagories  interior Works   False Ceiling, PVC False celling,Gypsum Partition,Wall Partition, Modular Kitchen, Wooden Wardobe,Wooden Flooring, etc.,,