X

Technos Instruments

Sitapura, Jaipur, Rajasthan

| GST  08AAEFT7528C1Z6

is a member of IndiaMART

| Verified Supplier

|

★★★★★
★★★★★
View Mobile Number 50% Response Rate

Our Product Range

+View All

CMD Sensors

Our range of products include PH-DX LED Type CMD Sensor, PHV LED Type CMD Sensor and LAV LED Type CMD Sensor.

PH-DX LED Type CMD Sensor
Interested in this product?
Get Best Quote
Power Source12 to 240VDC or 24 to 240VAC
Power consumptionAC power: Projector 0.5VA or less,Receiver: 3VA or less DC power: Projector 0.5W or less,Receiver:
Detecting distance30m or less(Without slit for both projector and receiver)
Detectable objectsOpaque object with 30 mm or more
Response time10msec or less
Operating modeChangeover for Light-ON and Dark-ON
Sensitivity adjusterProvided
ConnectionM3 screw terminal
Ambient illuminance10,000 lux or less
WeightApprox. 1.5 kg for both projector and receiver
Protective structureIP 66

PH-DX
Free voltage, 12 to 240VDC and 24 to 240VAC
  • Light-reception amount can be display with 5-point level lamp and so it is easy to check light-reception margin or dirty lens surface and dislocation of optical axis. 
  • Self-diagnosis function that checks light-reception margin provides with projector. This output is executed.
  • Output will be made when level of light-reception amount is lower than specific value caused by dirty lens surface or dislocation of optical axis.

View Complete Details

Yes, I am interested!

PHV LED Type CMD Sensor
  • PHV LED Type CMD Sensor
  • PHV LED Type CMD Sensor
Interested in this product?
Get Best Quote
Power Source100 to 240 V AC
Power consumption40 mA or Less
Light sourceInfrared LED(880nm)
Detecton distance25mmx2 beams
Detectable objectOpaque objects with 1mm or more
Operating modeChangeover by control wire
Protective circuitProtection for power reverse connection, Protection for output counter-voltage
Response time1msec or less
Repeatability0.1mm
IndicatorsPower lamp Green
ConnectionCable Type
WeightApprox 60 Gm

PHV-10
Using LED as Light source
This is a new optical fi ber type CMD using LED as light source. This equipment is composed of projector(Sensor head, heat-resistance fiber and amplifi er) and receiver and detects steel material whi ch passes through between them.
  • This doesn't specify power source. It is capable of being used within the scope of 100 to 240VAC.
  • Water-cool ing or air-purge isn't required fo r sensor head because non- air dust purge hood is appl ied.
  • 8-point LED display unable to monitor the margin and emitti ng state.
  • Warning output is provided.

View Complete Details

Yes, I am interested!

LAV LED Type CMD Sensor
  • LAV LED Type CMD Sensor
  • LAV LED Type CMD Sensor
Interested in this product?
Get Best Quote
Power source100 to 240VAC
Power consumptionProjector: 5VA or less, Receiver: 5.5VA or less
Safety standardClass 1(JIS C6802)
Detecting distance50 m
Detectable objectSteel material with 100 or more(FHM-311)
Response time30 Sec Or Less
Operating modeChangeover of DARK-ON/LIGHT-ON
Control output1C relay contact
Analog outputDC voltage output in proportion to light-reception amount(Saturated value 9V or more but do not use
ConnectionConnector type(Cable 2m)
Fiber unit characteristicsAllowable bending radius: 100mm, Max. pressure: 784MPa, Tension strength: 490N
Ambient illuminance10,000lux or less
Ambient humidity45 to 85%RH(Not icing)

Other Details:
LAV-10/LAV-11

This is a new optical fi ber type CMD using semi-conductor laser as light source. This equipment is composed of transmitte r(Sensor head, heat-resistance fi ber and amplifier) and receiver and detects steel material which passes through between them. It emits more powerfu lly compared with LED type so that high perfo rmance with margin in bad environment is possible.
  • It is capable of being used within the scope of 100 to 240VAC. 
  • Water-cool ing or air-purge isn't required fo r sensor head because non- air dust purge hood is appl ied. 
  • 8-point LED display unable to monitor the margin and emitti ng state.
  • Warning output is provided.

Optical axis adjustment

  • Optical axis adjuster, TES-110 is also available as an option.(Ask us in details) This is using red laser element(Class 2) and it is easy to adjust optical axis visually

View Complete Details

Yes, I am interested!
© Technos Instruments. All Rights Reserved (Terms of Use)