Technosys Systems

• XY table, 2-DOF robot arm and 2-DOF ball joint are all designed and manufactured according to industrial standards.
• Industrial incremental encoder and AC servo motor

Open Architecture:

• Hardware platform based on PC and DSP-based motion controller.
• Experiment verification program (DOS version), with source codes provided.
• Control software in MATLAB Simulink. Easy to development users controllers.

User Creativity:

• Developing and testing ones own control algorithms.
• Challenging the control problems concerning the two-grade Planar IP control algorithms.

• Display Dual 2 ½ digit bright LED Display.
• Accuracy ± 2% upto 100 meq/l , ± 5% above 100 meq/l
• Detector Silicon Photo diode
• Filters Narrow band interference glass filters
• Flame System LPG and dry oil free air.
• Power Supply 230V ± 10% AC 50 Hz

• Screen Diameter 200mm. Fine Ground Screen With Cross Line. Rotatable 0 To 360˚ Vernier Reading 2 Minutes.
• Magnification Accuracy ± 0.1% For Contour And ± 0.15% For Surface.
• Work Stage Table 150x150mm. X & Y Axis, Traverse 25mm In Each Direction Having Least Count .01mm.
• Contour Illumination 24v – 150w Halogen Lamp. Telecentric System And Sharp Twin Lens Condenser For Each Magnification Bright Adjustment
• Surface Illumination.
• Cooling System Built In Noiseless And Vibration Free Blower For Powerful Cooling System

• Screen Diameter 300mm. Fine Ground Screen With Cross Line. Rotatable 0 To 360˚ Vernier Reading 2 Minutes.
• Magnification 10x & 20x .
• Magnification Accuracy ± 0.1% For Contour And ± 0.15% For Surface
• Work Stage Table 150x150mm. X & Y Axis, Traverse 25mm In Each Direction Having Least Count .01mm
• Contour Illumination 24v – 150w Halogen Lamp. Telecentric System And Sharp Twin Lens Condenser For Each Magnification Bright Adjustment
• Surface Illumination. 12v – 50w Halogen Lamp With Reflect

• Screen Diameter 300mm. Fine Ground Screen With Cross Line. Rotatable 0 To 360˚ Vernier Reading 2 Minutes.
• Magnification Accuracy ± 0.1% For Contour And ± 0.15% For Surface.
• Work Stage Table 300x200mm. X & Y Axis, Traverse 25mm In Each Direction Having Least Count .01mm.
• Contour Illumination 24v – 250w Halogen Lamp. Telecentric System And Sharp Twin Lens Condenser For Each Magnification Bright Adjustment.
• Cooling System Built In Noiseless And Vibration Free Blower For Powerful Cooling System.

Features:

• Screen Diameter 300mm. Fine Ground Screen With Cross Line. Rotatable 0 To 360˚ Vernier Reading 2 Minutes.
• Magnification 10x & 20x .
• Magnification Accuracy ± 0.1% For Contour And ± 0.15% For Surface
• Contour Illumination 24v – 150w Halogen Lamp. Telecentric System And Sharp Twin Lens Condenser For Each Magnification Bright Adjustment
• Surface Illumination. 12v – 50w Halogen Lamp With Reflector
• Cooling System Built In Noiseless And Vibration Free Blower For Powerful Cooling System

• Screen Diameter 300mm. Fine Ground Screen With Cross Line. Rotatable 0 To 360˚ Vernier Reading 2 Minutes.
• Magnification 10x And 20x
• Magnification Accuracy ± 0.1% For Contour And ± 0.15% For Surface.
• Contour Illumination 24v – 250w Halogen Lamp. Telecentric System And Sharp Twin Lens Condenser For Each Magnification Bright Adjustment.
• Cooling System Built In Noiseless And Vibration Free

• Screen Diameter 300mm Fine Ground Screen With Cross Line. Rotatable 0 To 360˚ Vernier Reading 2 Minutes
• Magnification 10x And 20x
• Work Stage Table 200x200mm. X & Y Axis, Traverse 25mm In Each Direction Having Least Count .01mm.
• Contour Illumination 24v – 150w Halogen Lamp. Telecentric System And Sharp Twin Lens Condenser For Each Magnification Bright Adjustment.
• Surface Illumination 12v – 100w Halogen Lamp.

• Output %T: 0 to 100%, Abs: 0 to 1.999.
• Detector Silicon Photo diode.
• Light Source 6V – 1Amp. Halogen Lamp.
• Repeatability ± 1nm.
• Display 3.5 Digit LED Display.
• Power Supply 230V ± 10% 50 Hz AC.

• Display Digital 3½ Digit , Bright LED.
• Display Mode % T , O.D. and 3 Concentration Modes C1 , C2 , C3
• Zero Adjustment Automatic ( Without Knob Rotation )
• Accuracy ± 0.02 O.D.
• Memory In built memory to retain Last “K” factor factor for concentration even after power loss.

• Display 16 X 2 Alpha Numeric LCD Display.
• Range 0.1 µS to 100 ms (6 Decadic Ranges).
• Calibration Auto / Manual.
• Temperature Range 0 to 100°C.
• Cell Constant 0.1 to 5.0 Adjustable.
• Storage Up to 100 Samples.

Features:

• Filters Wavelength 400nm, 430nm, 500nm, 520nm, 540nm, 580nm, 600nm, 620nm, 680nm.
• Display Mode Absorbance & Wavelength.
• Detector Silicon photo diode Zero Adjustment Auto zero by microprocessor.
• Accuracy ± 0.01 O.D.
• Light Source Highly Accurate Laser Source.
• Amplifier Micro Controller Based.
• Volume 1 ml. Minimum.
• Power Supply 230V± 10% AC , 50Hz,

• Display 3.5 Digit LED.
• Range & Resolution pH 0 to 14.00 & pH 0.01.
• Accuracy & Temp. Comp. pH 0.01 ± 1 Digit & 0 to 100 Deg. C.
• Resolution 0.001 m Mhos(1Micro Mhos).
• Accuracy & Cell Constant 0.5% of range ± 1 digit & adjustable.
• Range & Resolution 0 to 100 deg.C & 0.1 Deg. C.
• Accuracy ± 0.2% of range ± 1 digit

• Display 3.5 Digit LED.
• Power Supply 230V ± 10% 50 Hz.
• Range 0 to 1000 NTU in 2 ranges.
• Accuracy ± 3% FS ± 1 Digit.
• Sample System 30mm Clear Glass Test Tubes.

• Range 0 to 20.0ppm.
• Accuracy ± 0.2ppm.
• Temp. Compensation 0 to 50 deg.C Manual.
• Power Supply 230V ± 10% 50 Hz AC.
• Sensor DO Amperometric Gold / Silver Temp.RTD (PT-100).

• Range pH : 0 to 14.00, mV : 0 to ± 1999.9.
• Accuracy ± 0.01 pH, ± .1 mV, Temp. ± 1°C. (Auto/Manual).
• Temp. Compensation 0 to 100°C.
• Calibration Auto / Manual.
• Power Supply 230V ± 10%, 50Hz AC.
• Auto Buffer Recognition Auto 4.00, 7.00, 9.20 pH.

• Standard Glass Filters 8 (Wavelength range 400 – 700nm).
• Minimum Volume 1ml.
• Display 3 Digit, Bright Red 7 Segment LED.
• Key Board 1 Keys Soft Touch Membrane Type.
• Absorbance 0 to 1.99
• Resolution 0.01.
• Accuracy 0.5 % FSI.
• Detector Selenium Photocell / Photo diode
• Light Source 6.3V – 0.3 Amp. Tungsten Lamp.
• Power Supply 230V ± 10%, 50Hz. AC.

• Range 5 Ranges, 0 to 1000 Mhos / cm. Auto Ranging
• Accuracy ± 1 % FS ± 1 digit
• Cell Constant Adjustable.
• Sensor Conductivity Cell.

• Range pH 0 to 14.00, mV 0 to ± 1999. Touch Button Calibration.
• Accuracy pH ± 0.01, mV ± 1 mV.
• Temp. Compensation Auto 0 to 100 deg. C., Manual 0 to 100 deg. C.
• Power Supply 230V ± 10% 50 Hz AC.

• Power Supply 230V ± 10% 50 Hz.
• Range 0 to 1000 ppt in 5 Ranges.
• Accuracy ± 2% FS ± 1 Digit.
• Temp. Compensation 0 to 50 deg.C.

• Accuracy & Temp. Comp. pH 0.01 ± 1 Digit & 0 to 100 Deg. C.
• Range & Resolution 0 to ±1999mV & 1mV.
• Range & Resolution 0 to 200 M Mhos / cm IN 4 range & 0.1 u Mhos / cm
• Accuracy & Cell Constant 0.5% of Range ± 1 Digit & 0.4 to 1.5 on Display.
• Range & Resolution 0 to 200ppt in 4 range & 0.1 ppm.
• Accuracy & Cell Constant 0.5% of Range ± 1 Digit & 0.4 to 1.5 on Display.
• Range & Resolution 0 to 20ppm & 0.1 ppm.
• Accuracy & Temp. Comp. 0.2 ppm ± 1 digit & 5 deg.C to 55 deg.C
• Do Sensor Gold/Silver Amperometric probe.
• Range & Resolution 0 to 100 deg.C & 0.1 deg.C.
• Accuracy 0.2% of Range ± 1 Digit.