Thermo Sensors

• Mounts in INdustry Standard Holes
• 1.6" Panel Depth
• Universal Power 16 -265 VAC/VDC
• (2) 8Amp SPDT Relays
• Accuracy 1% (better available)
• Large 0.5" LED Display
• LED Process Arch
• Measures Flow Velocity
• 15 selectable Units
• Optional 4-20mA output

• Filter Status
• Duct Static Pressure
• Clean Room Pressure
• Building Pressure
• Fan Blower Pressure
• Paint Booths
• Dust Collectors
• Glove Box Pressure
• Bubbler Systems
• Laminar Flow Hoods
• Cabinet Purging

• Universal input
• Upto 4 setpoints
• Autotuning: From cold start or at setpoint
• RS485 / MODBUS RTU
• 85 - 265 V AC SMPS
• Auto / Manual selection
• Isolated 0/4 - 20 mA or 0 - 10V DC for control / retransmission output
• PID, Proportional and ON-OFF control

• Standard - relay or analog control output
• VMD open + close relay outputs

• Universal controllers to manage temperature, humidity and pressure in both the industrial and commercial applications
• Stock optimization: thanks to the multi-probe inputs
• 1 or 2 stage on/off or pid with direct or reverse action
• Temperature inputs: ptc, ntc, pt100; thermocouple j, k or s by selecting the parameters
• Pressure or humidity inputs: 4÷20ma, 0÷1v or 0÷10v by selecting the parameters
• Direct line power supply. No external transformer required
• Display with integrated measurement unit (°c / °f / rh / bar / psi)
• Hot key or program tool kit connector for a quick and easy programming
• 3va max power absorption
• Display with red led (10,5mm high) and 5 icons

• Item Code: EKC-102

• Basal function of instrument
• Ai-208 economical intelligent temperature controller
• Ai-208g, with ssr voltage output, no alarm output
• Ai-208gl1, with ssr voltage output + 1 relay alarm output (n. O. / n. C. ) or 1 contact output, but no alarm output
• Ai-208gl5, with ssr voltage output + 1 relay alarm output (n. O. ) and 1 contact output and alarm output
• Front panel dimension
• A front panel 96><96 mm (width * height),cut out 92x92mm

• Universal input
• Up to 5 set points - 4 relays + 4 - 20 mA
• Auto tuning: From cold start or at set point
• RS485 / MODBUS RTU, isolated
• 85 - 265 V AC SMPS, 24 VDC, 24 VAC
• Auto / Manual selection
• Isolated 0/4 - 20 mA or 0 - 10V DC for control / retransmission output
• PID, Proportional and ON-OFF control
• PID versions
• Standard - relay or analog control output
• VMD open + close relay outputs

Owing to the presence of our expert engineers, we have been able to manufacture, trade and supply of a supreme quality PID Temperature Controller. This temperature controller is manufactured with quality approved material with the help of the advance techniques. The offered temperature controller is delivered to our customers only after its proper examination on various parameters. Along with that, our customers can avail this temperature controller from us at reasonable prices.

Features:

• Efficient working
• Highly reliable
• Compact design

Specifications:

• 2 Universal input 8 thermocouple types (B, E, J, K, N, R, S, T), Pt100 and milli-ampere signals
• Set Points 2
• Isolated current or voltage control/retransmission output
• PID, Time Proportional and ON-OFF control
• Auto-tuning
• 1. From cold start or
• 2. At set-point
• High Accuracy - 0.1% of full scale
• Sensor-break indication
• Plug-in design

• Universal input: 8 thermocouple types(B, E, J, K, N, R, S, T), Pt100 and milli-ampere signals
• Set points: 2
• High Accuracy - 0.1% of Full Scale
• Plug in design
• Isolated current/voltage control/retransmission output
• Time Proportional, PID and ON-OFF control
• Sensor break indication- Radix's proprietary technology
• Auto tuning of PID parameters

Cost-effective temperature controller. It accepts J-type (Iron/Constantan) and K-type (Chromel/Alumel) thermocouples as well as Pt 100 RTD inputs. A large LED dual-display on the front of the process controller shows the difference in values of the setpoint and process value while 2 additional LEDs indicate the status of each of the two relays. Operators easily program up to 2 setpoints via membrane keys on the front of EC96. With an error of only 0.1% of the full-scale, this is a process controller of superior accuracy. Typically, readings have a maximum error of ± 1 °C. The controller has 2 electromagnetic relays that trigger heating or cooling. EC96 is conventionally an ON-OFF controller that outputs a discrete signal, but can also be used in Time-Proportioning Mode which turns the actuator on and off for periods proportional to the desired control effort, to emulate a continuous actuator that can generate a control effort between 0 and 100%. EC96 features Radix's proprietary sensor-break indication technology.

Specification:

• J, K thermocouples and Pt100 RTD inputs
• Up to 2 setpoints
• Accuracy: ± 0.1% of full scale, typically ±1 °C
• ON-OFF and Time Proportional Control
• 85 - 265 V AC SMPS power supply
• Sensor break indication

Backed by or highly skilled and experienced professionals we are engaged in offering Temperature Controller. Used in various industries to control the temperature & heat, the offered product is checked various quantities provisions for dispatching a flawless range. This product is well manufactured with topmost grade material in tandem with set market norms. The offered product is provided in numerous specifications as per the need of customers.

Features:

• Excellent durability
• Perfect finish
• High quality

• 2 Universal input: 8 thermocouple types (B, E, J, K, N, R, S, T), Pt100 and milli-ampere signals
• Set Points 5: Four for relays,One for 4 - 20 mA
• Auto-tuning: from cold start or at set-point
• RS485/MODBUS RTU, isolated
• 85~265 VAC SMPS, 24 VAC, 24 VDC
• Selection: Auto / Manual
• 2 x Isolated 0/4-20 mA or 0-10 V DC for control or retransmission
• PID, Proportional, ON-OFF control
• Scalable Remote Setpoint

• Standard – relay/analog control output
• VMD open + close relay outputs

• Universal input - 8 thermocouples, Pt100, 0 - 50 milli volts, 4 - 20 mA
• Up to 2 set points
• TC-48 - Universal input, 2 Set points, 48x48
• Accuracy: ± 0.1% of full scale, typically ±1 °C
• Isolated 0/4-20 mA or 0-10 V DC retransmission output
• ON-OFF and Time Proportional control
• 85-265 V AC SMPS or 20-35 V DC or 24 V AC power supply
• Sensor break indication