Thriver Equipment Services

Model SP-200A ( 20- Ltr )
 Model SP-200

Motor
1/2 h.p., (370W) grease packed ball bearing, air-cooled, 230V/50Hz/1Ph

Controls
Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, and thermal overload protection

Cord and Plug
6 ft. flexible three wire cord and ground prong.

Transmission
Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by direct linkage to the motor drive shaft. This design yields high-torque mixing power.

Speeds:
(Agitator rpm), (Hub rpm’s)
1. Low Speed 106, 59
2. Intermediate Speed 196, 110
3. High Speed 358, 201

Bowls and Agitators
Standard equipment includes a 20Qt. (19Litres) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

Attachments
Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.

Finish
Top (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel

Shipping Information
N.W. 80kgs
G.W. 100kgs

Size: 
Depth x Width x Height 
53cm x 52cm x 87cm

Model SP-502 / SP-502A

Motor
750W, grease packed ball bearing, air-cooled, 110V/60Hz, 220V/50Hz, Single phase

Controls
Spar Mixer controls are top-mounted to give easy access in cramped kitchen environments.

Cord and Plug
Single phase are hard wired

Transmission
The unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.

Speeds:
1. 1st gear 40 rpm
2. 2nd gear 70 rpm
3. 3rd gear 90 rpm
4. 4rd gear 106 rpm
5. 5rd gear 140 rpm
6. 6rd gear 170 rpm
7. 7rd gear 190 rpm
8. 8rd gear 210 rpm
9. 9rd gear 230 rpm
10. 10rd gear 260 rpm

Bowls and Agitators
Standard equipment includes a 5Litres high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

Finish
White epoxy enamel

Shipping Information
N.W. 15 kgs
G.W. 16 kgs

Size: (L x W x H)
40cm x 31cm x 45.5cm

Cartons are affixed to an undersized skid (pallet), the weight and diminsions of this skid are not included above and may vary from shipment to shipment.

Model SP-100A
Model SP-100

Motor
1/3 h.p., (250W) grease packed ball bearing, air-cooled, 230V/50Hz/1Ph

Controls
Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, and thermal overload protection

Cord and Plug
6 ft. flexible three wire cord and ground prong.

Transmission
Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by direct linkage to the motor drive shaft. This design yields high-torque mixing power.

Speeds
(Agitator rpm), (Hub rpm’s)
1. Low Speed 106, 59
2. Intermediate Speed 196, 110
3. High Speed 358, 201

Bowls and Agitators
Standard equipment includes a 10Qt. (9.5Litres) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

Attachments
Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.

Finish
Top (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel

Shipping Information
N.W. 65kgs
G.W. 80kgs

Size:
Depth x Width x Height
46cm x 45cm x 76cm

Model SP-800A ( 8- Ltr )
Model SP-800 ( 8-ltr )

Motor
1/4 h.p. (0.20kw), grease packed ball bearing, air-cooled, 110V/60Hz, 220V/50Hz, Single phase

Controls
Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection

Cord and Plug
Single phase are hard wired

Transmission
Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.

Speeds:
1. 1st gear 132 rpm
2. 2nd gear 234 rpm
3. 3rd gear 421 rpm

Bowls and Agitators
Standard equipment includes a 8 Qt. (7.6Litres) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

Finish
White epoxy enamel

Shipping Information
N.W. 25 kgs
G.W. 27 kgs

Size: (L x W x H)
47cm x 28cm x 58cm

Model SP-22HA

Motor
3/4 h.p. (550W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph

Controls
Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection

Cord and Plug
6 ft. flexible three wire cord and ground prong.

Transmission
Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.

Speeds: (Agitator rpm)
1. Low Speed 108
2. Intermediate Speed 183
3. High Speed 352

Bowls and Agitators
Standard equipment includes a 24Qt. (23.75Litres) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

Attachments
Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.

Finish
Top (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel

Shipping Information
N.W. 110kgs
G.W. 140kgs

Size:
Depth x Width x Height 
56cm x 55cm x 91cm

Model SP-30HA

Motor
1 h.p. (750W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph, 220V/380V/50Hz/3Ph

Controls
Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection

Cord and Plug
6 ft. flexible three wire cord and ground prong.

Transmission
Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.

Speeds
(Agitator rpm), (Slicer/Grinder rpm)
1. Low Speed 99, 69
2. Intermediate Speed 176, 123
3. High Speed 320, 224

Bowls and Agitators
Standard equipment includes a 30Qt. (30L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

Attachments
Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.

Finish
Top (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel

Shipping Information
N.W. 180kgs
G.W. 210kgs

Size:
Depth x Width x Height 
67cm x 55cm x 117cm

Model SP-60HA

Motor
3 h.p. (1500W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph, 220V/380V/3Ph

Controls
Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection

Cord and Plug
Both single phase and three phase are hard wired

Transmission
Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.

Speeds:
(Agitator rpm), (Slicer/Grinder rpm)
1. Low Speed 99, 60
2. Intermediate Speed 176, 108
3. High Speed 320, 197

Bowls and Agitators
Standard equipment includes a 60Qt. (60L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

Attachments
Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.

Finish
Top (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel

Shipping Information
N.W. 270kgs
G.W. 310kgs

Size:
Depth x Width x Height 
78cm x 65cm x 131cm

Model SP-50HA

Motor
2 h.p. (1500W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph, 220V/380V/3Ph

Controls
Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection

Cord and Plug
Both single phase and three phase are hard wired

Transmission
Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.

Speeds
(Agitator rpm)
1. Low Speed 99
2. Intermediate Speed 176
3. High Speed 320

Bowls and Agitators
Standard equipment includes a 50Qt. (50L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

Attachments
Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.

Finish
Top (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel

Shipping Information
N.W. 270kgs
G.W. 310kgs

Size:
Depth x Width x Height 
75cm x 65cm x 131cm

 Model SP-40HA

Motor
1.5 h.p. (1200W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph, 220V/380V/3Ph

Controls
Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection

Cord and Plug
Both single phase and three phase are hard wired

Transmission
Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.

Speeds
(Agitator rpm)
1. Low Speed 99
2. Intermediate Speed 176
3. High Speed 320

Bowls and Agitators
Standard equipment includes a 40Qt. (40L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

Attachments
Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.

Finish
Top (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel

Shipping Information
N.W. 250kgs
G.W. 290kgs

Size:
Depth x Width x Height 
75cm x 65cm x 131cm