TI Anode Fabricators Private Limited

Salt and electricity generates pure chlorine solution in a safe, simple and cost effective way to disinfect pools. Recommended operating conditions of the pool is:

Eatable Salt (sodium chloride) range of 2 to 6 grams per liter, average 4 Gpl that is 0.4% (less than 12% of sea water. Pool temperature should be15-40°C, stabilizer levels of 30-50 ppm for outdoor facilities.

When the electrodes is energized by DC current, the catalyst react with the sodium chloride and water molecules at the anode and cathode surfaces to generate the chlorine disinfectant in the form of hypochlorous acid and sodium hypochlorite in the pool water. When the chlorine kills the pathogens and oxidizes organics or contaminants, chlorine remains returns to the native state as salt (NaCl) in water as a recycling process.

Since the 1999 Tiaano offer titanium electrodes to worldwide swimming pool equipment manufacturers for swimming pool Electrochlorinators. Our electrodes are showing outstanding performance in self-cleaning product based on current reversal technology. The versatility of the product allows for use in residential, spa and commercial applications.

Typical 3-5 year chlorinator life leads lesser amount of pool store since the disinfectant is made on-site. Electrodes are made from Titanium Grade 1 sheet and mesh as per ASTM B 265, coated with platinum group precious metal oxide.

Additional Information:

• Delivery Time: 2 Weeks

• Simple cable installation
• Easy handling and set-up
• Improved coating results
• Anode segments are replaceable

Additional Information:

• Production Capacity: Custom Size
• Delivery Time: 3 Weeks

Tiaano^®, a design and fabrication  company  established in 1992 with well equipped in-plant facilities and qualified engineers; delivers ELECTRO CHEMICAL and ENGINEERING equipments and TURNKEY projects from the single platform by using (i) Inert metals of … Titanium, Tantalum, Niobium, Zirconium, Nickel, Hastelloy, Duplex SS, Molybdenum & their alloys; (ii) Precious metal oxides of… Iridium, Ruthenium, Platinum, Palladium etc.  Our equipment mix includes, Platinised, DSA / MMO Electrodes, Electrolyzers, Electro-chlorinators, Jigs, Heat exchangers, Electric Heaters, Storage Tank, Column, Pressure vessels, Reactor, Pumps, Blowers, Mixers etc.

Additional Information:

• Production Capacity: Custome Size
• Delivery Time: 2 Weeks

Tiaano^®, a design and fabrication company established in 1992 with well equipped in-plant facilities and qualified engineers; delivers ELECTRO CHEMICAL and ENGINEERING equipments and TURNKEY projects from the single platform by using (i) Inert metals of … Titanium, Tantalum, Niobium, Zirconium, Nickel, Hastelloy, Duplex SS, Molybdenum & their alloys; (ii) Precious metal oxides of… Iridium, Ruthenium, Platinum, Palladium etc. Our equipment mix includes, Platinised, DSA / MMO Electrodes, Electrolyzers, Electro-chlorinators, Jigs, Heat exchangers, Electric Heaters, Storage Tank, Column, Pressure vessels, Reactor, Pumps, Blowers, Mixers etc.

Additional Information:

• Delivery Time: 1 Week

Titanium has the mechanical stability and uniform current distribution character, Tiaano India design, manufacturing and supplying Platinized or MMO coated titanium electrodes for MGPS (Marine Growth Prevention System) Electrolyzer or seawater chlorination.

Tiaano offer various type of Electrodes Assembly for MGPS system:-

Parallel Plate Electrodes:-

MMO Titanium Anode & Steel Cathode

MMO Titanium Anode & Hastelloy C or Titanium Cathode

Concentric Tube Electrode:-

Platinized Titanium Anode & Titanium Cathode

MMO Titanium Anode & Titanium Cathode

MMO Titanium Anode & Steel Cathode

MMO Titanium Anode & SS Cathode

Parallel Plate and Mesh Electrodes:-

MMO Titanium Anode & Hastelloy C or Titanium Cathode

Concentric Rod Electrode:-

Platinised Titanium Rod Anode & Steel Cathode Assembly

Additional Information:

• Delivery Time: 3 weeks

Tiaano^®, a design and fabrication  company  established in 1992 with well equipped in-plant facilities and qualified engineers; delivers ELECTRO CHEMICAL and ENGINEERING equipments and TURNKEY projects from the single platform by using (i) Inert metals of … Titanium, Tantalum, Niobium, Zirconium, Nickel, Hastelloy, Duplex SS, Molybdenum & their alloys; (ii) Precious metal oxides of… Iridium, Ruthenium, Platinum, Palladium etc.  Our equipment mix includes, Platinised, DSA / MMO Electrodes, Electrolyzers, Electro-chlorinators, Jigs, Heat exchangers, Electric Heaters, Storage Tank, Column, Pressure vessels, Reactor, Pumps, Blowers, Mixers etc.

Additional Information:

• Production Capacity: Custom Size
• Delivery Time: 1 Week

Tiaano^®, a design and fabrication  company  established in 1992 with well equipped in-plant facilities and qualified engineers; delivers ELECTRO CHEMICAL and ENGINEERING equipments and TURNKEY projects from the single platform by using (i) Inert metals of … Titanium, Tantalum, Niobium, Zirconium, Nickel, Hastelloy, Duplex SS, Molybdenum & their alloys; (ii) Precious metal oxides of… Iridium, Ruthenium, Platinum, Palladium etc.  Our equipment mix includes, Platinised, DSA / MMO Electrodes, Electrolyzers, Electro-chlorinators, Jigs, Heat exchangers, Electric Heaters, Storage Tank, Column, Pressure vessels, Reactor, Pumps, Blowers, Mixers etc.

Additional Information:

• Delivery Time: 3 weeks

Tiaano^®, a design and fabrication  company  established in 1992 with well equipped in-plant facilities and qualified engineers; delivers ELECTRO CHEMICAL and ENGINEERING equipments and TURNKEY projects from the single platform by using (i) Inert metals of … Titanium, Tantalum, Niobium, Zirconium, Nickel, Hastelloy, Duplex SS, Molybdenum & their alloys; (ii) Precious metal oxides of… Iridium, Ruthenium, Platinum, Palladium etc.  Our equipment mix includes, Platinised, DSA / MMO Electrodes, Electrolyzers, Electro-chlorinators, Jigs, Heat exchangers, Electric Heaters, Storage Tank, Column, Pressure vessels, Reactor, Pumps, Blowers, Mixers etc.

Additional Information:

• Production Capacity: 250 KPH
• Delivery Time: 30 days

Tiaano,a complete design and fabrication company established in 1992 is into designing, manufacturing on-site Electrochlorinators for light and heavy industrial applications. The range of chlorine production capacity starting from few grams to 50 kilograms per hour (1200 kgs/day).  Our chlorinators generate hypo with the highest chlorine concentration that is economically viable, for example - 2000 ppm by Seawater (online continuous) systems; 8000 ppm by Brine (Fresh Water + Salt) both continuous and batch type Systems.  3 ppm by Swimming Pool (online continuous) Systems; 2 ppm by fresh water (online continuous) systems.  

All our systems are fail-safe and interlock controlled either locally or by remote; They are designed for both safe and hazardous area optionally with full certification; with acid cleaning system or acid free self-cleaning system like reverse polarity and high flow velocity CTE construction. 

Additional Information:

• Production Capacity: 50 grams per Hour to 250 Kgs per Hour
• Delivery Time: 3 Weeks

Tiaano designed this system to prevent the marine growth to the internal pipe line of ships through the chemical reaction of chlorine compounds which are produced through the electrolysis of seawater.

Effects of Marine Growth:-

The fouling problem arises when barnacles, mussels and other lower forms of marine life as larvae enter pipework systems and settle on the internal surface of pipes where they rapidly grow and multiply.

In the most extreme cases, complete seawater lines can become blocked, affecting the safety and operational capability of the ship, in other instances, the gradual restriction in the flow of seawater through cooling systems can impair engine efficiency, leading to increased fuel usage.

Effect of Chlorine (Sodium Hypochlorite):-

Chlorine is a well-known toxicant. It has been shown that 0.2 to 0.5 ppm of continues electro chlorination will prevent all marine fouling in time. Higher than 0.5 ppm might produce the corrosion of the metallic piping, and other metallic equipment.

A trace residual discharge will insure the killing of all fouling organisms in a seawater system when constant chlorination is employed. It should be emphasized that constant chlorination is the best method for safe and efficient fouling and bacteria control.

Alongside these principal reactions which bring about the production of sodium hypochlorite, secondary reactions occur due to the actions which are present in seawater such as calcium and magnesium, forming hydrates and carbonates.

Sodium hypochlorite solution leaving the generating chamber is piped to the chlorine injection pinots situated on the sea chests to be mixed with the incoming sea water flow.

Then the chlorine active contained in the solution oxidizes the organic substances found in sea water.

The adult organisms, for example mussels, are able to resist the effects of chlorine active by closing themselves inside their shells. However unable to feed they will not settle in an environment where chlorine active is present.

 Advantages of using MGPS:-

1.         Based on the electrolytic principle, providing continues and reliable protection from marine growth without the use of chemicals.

2.         A dual system combining pipework anti fouling and corrosion suppression

3.         Environmentally safe, meets all environmental protection standards

4.         Reduces energy consumption

5.         Maintains plant and equipment at high efficiency

6.         Reduces cleaning cost of pumps, pipes, valves, sea chests, gratings, heat exchangers, etc

7.         Improved Heat transfer in heat exchangers

8.         Increase life span of plant and equipment

9.         Provides continues maintenance free protection for years

10.       Lower capacity and operating costs than any competing technology.   

Additional Information:

• Delivery Time: 3 weeks

Tiaano manufacturing different sizes and Shapes of platinum or platinized Electrodes for water Deionisation. Water Deionizer Electrodes [Anodes or Cathodes] are available with hanging hook, frame or band in the form of sheet, expanded mesh, pipe, rod and custom built.  Deionized water is also called demineralized water. The majority of water impurities are dissolved salts, deionization results in high purity water that is generally similar to distilled water.

Ions are electrically charged atoms or molecules found in water that have either a net negative or positive charge.

Water Deionization Process:-

Among all common water filtration methods, the process used for removal of all dissolved salts from water is referred to as deionization. Deionization requires the flow of water through two ion exchange materials in order to affect the removal of all salt content.

The terms demineralization and deionization are used somewhat interchangeably by the industry. While the term demineralization is generally better understood, deionization is especially suit.

Additional Information:

• Delivery Time: 2 weeks

1. Tiaano conducting:
   
   
   • Precious metal (ruthenium, iridium, palladium and platinum) coating on exotic metal substrates for electrochemical application, by thermal decomposing process.
   • Platinum and rhodium metal plating on exotic metal substrates for different electrochemical application including electrodepositing the nonferrous and precious metals.

Additional Information:

• Production Capacity: Custom Size
• Delivery Time: 3 Weeks

Tiaano, a technological leader in PPE, CTE, PPME, Titanium Electrolyzers (electrode assembly of titanium anode & cathodes) for Electro Chlorinators / Anti fouling systems using onshore locations like power stations, refineries, desalination and smelters & offshore applications like ships, offshore platforms. Over 1,000 installations all over the world, customers are supported through an international network of agents in over 40 countries. Tiaano’s activities related with Electrochlorination and Cathodic Protection are

Capacity of Tiaano for Replacement / Refurbishment of Electrolyzers: Our experience on single electrolyzer construction & installation is starting from 100 gram Cl2 per hour to 250 Kilo grams per hour. Meet the higher capacity plants are by multifold arrangement of said electrolyzers. We design the cells to consume 3.5 to 4.0 DC Voltages, with the DSA coating of 5 years life warrantee, life may extended further two to three years, when the maintenace is proper.

We expertise for the replacement or refurbishment of electrolyzers & other spares for electro-chlorination plants, where the project executed by the World leaders, viz,

M/s. Seven Trent De Nora, USA [Chlortec, Seachlor, Sanilec, Omni pure, Balpure]

M/s. Siemens, USA [US Filters, Chloropac, Sanichlor, OSEC, Seapac, Electrocatalytic]. M/s. Daiki, Japan.

M/s. Mitsubishi, Japan.

M/s. Cumberland, UK.

M/s. Pepcon, USA.

M/s. Sespi, Italy.

M/s. Nippon, Japan.

M/s. Electrichlor, USA.

M/s. Charles Thompson Limited, UK.

M/s. Sal-Chlor, Australia and many.

M/s. Titan, India

Enclosed our product brochures are self explanatory. Request you to go through them and feel free to call us for your techno-commercial clarification.

Additional Information:

• Item Code: Electrolyzer
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Chennai
• Production Capacity: 2000 kgs per month
• Delivery Time: one month
• Packaging Details: Seaworthy and air worthy packing

Ti Anode Fabricator Pvt. Ltd, we design, fabricating and supply various type of Mmo Coated Earthing Electrode & offering different type of shape and forms are available.

SPECIFICATIONS AND DETAILS ABOUT THE TITANIUM RING ELECTRODE

PRODUCT NAME  : TITANIUM RING ELECTRODE

APPLICATION      : CHLORATE PLANT

THICKNESS           : 2 MM

COLOUR             : BLACK

MATERIAL           : TITANIUM

GRADE               : GR.1

 HOOK WIDTH    : 20 MM

Additional Information:

• Delivery Time: 2 Weeks

We design, manufacturing and supply of MMO & Platinum plated Titanium and Niobium anodes for Impressed Current Cathodic Protection (ICCP). According to the customer’s requirement we manufacture the anodes from copper cored titanium and copper cored niobium too. Our anodes are gone through the accreditation test by M/s. TWT, London as per NACE standard TMO 294-2001.Either the factory made ‘LIDA’ or ‘CPCC’ connected tubular string anodes; anode tubes; anode strings for offshore platforms protection; civil probe anodes; wire anodes, piggy back anodes, anode flex, canister pack anodes; rod anodes; strip anodes; disc anodes; tank bottom ribbon anodes; mesh ribbon anodes; discrete mesh anodes are also in our production scope.

Additional Information:

• Production Capacity: Custom Size
• Delivery Time: 3 Weeks

Tiaano^®, a design and fabrication  company  established in 1992 with well equipped in-plant facilities and qualified engineers; delivers ELECTRO CHEMICAL and ENGINEERING equipments and TURNKEY projects from the single platform by using (i) Inert metals of … Titanium, Tantalum, Niobium, Zirconium, Nickel, Hastelloy, Duplex SS, Molybdenum & their alloys; (ii) Precious metal oxides of… Iridium, Ruthenium, Platinum, Palladium etc.  Our equipment mix includes, Platinised, DSA / MMO Electrodes, Electrolyzers, Electro-chlorinators, Jigs, Heat exchangers, Electric Heaters, Storage Tank, Column, Pressure vessels, Reactor, Pumps, Blowers, Mixers etc.

Additional Information:

• Production Capacity: Custom made
• Delivery Time: 1 Week