TMA International Private Limited

Fuel Type	Diesel
Condition	New
Power	32 Amp
Brand	TMA Unicon
Voltage	230 Volts
Models	SILENT BDS 5000
Type	4-Stroke, OHV, Single Cylinder, Direct Injection, Swirl Chamber, Inclined type
Starting System	Recoil Start and Self Start
Fuel Tank Capacity	20 Litre
Fuel Consumption	1.0 L/H
Sound level (Db)	Greater Than 75DB
Lubricating Oil Consumption	4.1 gm./Hr.
Lube. Oil Capacity	900 ml.
Max AC Output VA	5000
Rated AC Output VA	4200
Rated Current Amps	18.3
Max. Current Capacity	32 Amps

We provide Generator to our clients. In electricity generation, a generator is a device that converts motive power into electrical power for use in an external circuit. Sources of mechanical energy include steam turbines, gas turbines, water turbines, internal combustion engines and even hand cranks.

Brand	TMA
Insulation class	E
Thickness	0.13mm-0.50mm
Type	Insulation Paper
Width	10mm-1000mm
Color	White

Product Description:

Owing to a long-term destination for our business, we are engaged in offering a wide gamut of Polyester Film For Insulation. Highly suitable for high tension application, our offered polyester film is designed utilizing quality-tested material and modern techniques in synchronization with defined standard. Apart from that, this polyester film is tested by vendor’s quality inspectors on numerous parameters in order to supply a perfect range.

Features:

• High strength
• Highly insulating
• Well designed

Applications:

• Electric Motors
• Transformer Insulation Films
• Capacitors
• Flexible Printed Circuit Films etc.

Conductor Size	CUSTOMIZED
Material	Steel
Standard	ASTM B-232, ASTM B-230, ASTM B-498
ASTM B-232	Concentric Lay Aluminum Conductors
ASTM B-230	Aluminum 1350-H19 Wire for Electrical Purposes
ASTM B-498	Zinc Coated (Galvanized) Steel Core Wire for ACSR

ACSR conductors consist of a solid or stranded steel core surrounded by strands of aluminum (E.C. GRADE). ACSR conductors are available in a wide range of steel, containing carbon from 0.5% to 0.85 %. The higher strength ACSR conductors are used for river crossings, overhead ground wires, installations involving extra long spans etc. Against any given resistance of conductor, ACSR may be manufactured within a wide range of tensile strength as per the requirement.

Key Benefits :The principal advantage of these conductors are high tensile strength so that they are used for longer spans with less supports. Due to the greater diameter of ACSR conductors a much higher corona limit can be obtained causing big advantages on high as well as extra high voltage overhead lines.

Features:
1. high Tensile strength
2. better sag properties
3. economic designl
4. best suited for transmission lines with long spans.

Specifications: SURAL bare ACSR conductors meet or exceed the following ASTM specifications:

B-230 Aluminum Wire, 1350-H19 for Electrical Purposes
B-232 Aluminum Conductors, Concentric-Lay-Stranded,Coated Steel Reinforced (ACSR)
B-341 Aluminum Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ)
B-498 Zinc Coated Steel (Galvanized) Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
B-500 Zinc Coated and Aluminum Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR)

ACSR supplies by the company are all international standards like ASTM, AS, BS, CSA, DIN, IEC, NFC, SS etc.

Applications:

• Hightension Lines
• Overhead transmission cable
• Overhead ground wires
• river crossings

Cooling Type	Oil Cooled
Phase	Three Phase
Power (VA)	Upto 1000 MVA, 1200 kV
Rectifier Transformer	Upto 160 KA DC
Furnace Transformer	Upto 100 MVA
Specialty Transformer	Testing Transformer and Transformers having multiple secondaries
Reactors	Upto 765 kV

A Power Transformers is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction. Electromagnetic induction produces an electromotive force within a conductor which is exposed to time varying magnetic fields. Transformers are used to increase or decrease the alternating voltages in electric power applications.A varying current in the transformer's primary winding creates a varying magnetic flux in the transformer core and a varying field impinging on the transformer's secondary winding. This varying magnetic field at the secondary winding induces a varying electromotive force (EMF) or voltage in the secondary winding due to electromagnetic induction.

Voltage Level	High-Voltage
Current Rating	32 A, 40 A, 63 A, 25 A,
Number Of Poles	2, 4
Curve	3 Curve
Frequency	50 Hz
Voltage	415 V

MCB Changeover Switch Types

CURRENT RATING(A)
25A, 2Pole, MCB Type Changover Switch
40A, 2Pole, MCB Type Changover Switch
63A, 2Pole, MCB Type Changover Switch
25A, 4Pole, MCB Type Changover Switch
40A, 4Pole, MCB Type Changover Switch
63A, 4Pole, MCB Type Changover Switch

Features:

• Compact in size.
• Clear indication of Line 1, Line 2 and OFF position.
• Din Mounted with AgCdO contacts for weld free operations.
• IP 20 protections: Finger-touch proof.
• Flame retardant body & cover.
• Higher short circuit withstands capacity.
• Utilization Category: AC22A.

Specifications:

• IS / IEC 60947-3

Applications:

• MCB Changeover switching to an alternate source of supply from main supply

Poles Number	1 Pole, 2 Pole, 3 Pole, 3 Pole+N, Customized, 1pole+N
Rated current	63A, 4Pole, MCB Type Changover Switch
Power	240
Classification	Type B, Type C
Model No.	Customized

Product Description :

We sell all types of Miniature Circuit Breakers.

MCBs or Miniature Circuit Breakers are electromechanical devices which protect an electrical circuit from an overcurrent. An MCB is a better alternative to a Fuse since it does not require replacement once an overload is detected.
MCBs are generally designed to trip within 2.5 millisecond when an over current fault arises. In case of temperature rise or over heating it may take 2 seconds to 2 minutes for the MCB to trip. MCB commonly used in the house hold.

MCB Type Changover Switch

CURRENT RATING(A)

• 25A, 2Pole, MCB Type Changover Switch
• 40A, 2Pole, MCB Type Changover Switch
• 63A, 2Pole, MCB Type Changover Switch
• 25A, 4Pole, MCB Type Changover Switch
• 40A, 4Pole, MCB Type Changover Switch
• 63A, 4Pole, MCB Type Changover Switch

Types of Circuit Breakers:
1. Low-voltage circuit breakers2. Magnetic circuit breakers
3. Thermal magnetic circuit breakers
4. Common trip breakers.
5. Medium-voltage circuit breaker
6. High-voltage circuit breakers
7. Sulfur hexafluoride (SF₆) high-voltage circuit breakers
8. Disconnecting circuit breaker (DCB)
9. Carbon dioxide (CO₂) high-voltage circuit breakers

Flame Retardant	Yes
Wire Type	Building Wire, Drawn Wire, Electric Wire
Number of Core	1
Brand	TMA UNICON
Armoured	Yes
Packaging Type	Bundles

We are a trustyworthy organization offering a wide a gamut of Electrical Wire.

PRODUCTS:

• Power & Control Cables
• LT XLPE Cables
• HT XLPE Cables / Selection of Cables
• Building Wire / House Wire
• Flexible Cables
• PVC Insulated Winding Wire & 3 Core Flat Cables
• Instrument Signal Cables
• Special Cables
• Extension/Compensating Leads/cables
• AAAC Cable Conductor
• ACSR Cable Conductor
• Aerial Bunched Cables
• Jelly Filled Cables
• Industrial Cables
• Unarmoured Cables
• Armoured Cables
• Telecommunication cables
• Signalling cables

and any special category of cables as per requirement including XLPE and FRLS cables.

The Growing importance of flame retardance.
Flame retardant cables should fulfill the following four criteria:

Applications
FRLS and FS cables are specially designed for buildings and installations where a high degree of safety of personnel and equipment is envisaged. The cables are especially recommended for use in the following buildings and installations:

• Hospitals
• High rise buildings
• Theaters
• Hotels
• Schools
• Warehouses
• Industrial Complex
• Power Stations
• Data Processing Centres
• Underground trains
• Offshore and onshore platforms

Color	Transparent, Black, Multicolor, White, Brown
Tape Width	>100 mm, 0-20 mm, 40-60 mm, 20-40 mm, 60-80 mm, 80-100 mm
Feature	Antistatic, Heat Resistant, Printed, Water Proof, Holographic
Tape Length	0-10 m, 20-30 m, >50 m, 10-20 m, 30-40 m, 40-50 m
Brand	Abro, 3M, TMA

Product Description:

Being a highly effective, lean and fast-moving organization, we are highly instrumental in providing Insulation Tapes. These insulation tapes are manufactured by vendor’s professionals utilizing the excellent quality material that has moisture absorption and dimensional stability. Offered insulation tapes are available in various sizes as per the need of clients. Along with that, clients can avail these insulation tapes at reasonable prices in a given time.

Features:

• Moisture absorption
• Adhesive and printing compatibility
• Optimum quality

Applications:

• Insulate electrical wires
• Electrical House Wiring
• Industrial Wire etc.

Steel Slitting

Die Cast Rotors

Electrical Lamination

Product Specifications:

Considering our Product Quality. Standard of Precision achieved and maintained and reliable services provided by us, The Company were approached for additionally incremental Business in the field of Lamination Punching, Decarb Annealing, Stack Making, Rotor / Alloy Component Die Casting and Machining.

Steel Slitting machine of 1270 mm along with high speed lamination punching presses of 100 ton. 160 ton and 200 ton are installed at unit no. 1 having covered area of 12000 sq. ft.

Electrical Steel Stampings:

The Company can manufacture laminations in all grades of electrical steel including fully or semi processed steel in the form of Stators & Rotors, Field & Armatures in loose as well as Interlocked & Auto Skewed Cores.

Die casting:
The Company have in house Pressure Die Casting Facilities for the process of casting Rotor Packs

Decarb Annealing:
The Company have in house Annealing Facilities for Annealing Electrical Laminations.

Tool Room:
The Company have a fully equipped tool room for support of the Press shop & Die Casting Shop.

The Company offer

• Steel Slitting
• Lamination Punching on Hi Speed Presses.
• Decarb Annealing
• Die Casting
• Parts for FHP Motors
• Electrical Steel Stampings
• Startor Stacks
• Die Cast Rotors
• Interlocked and Auto Skewed Cores
• Alloy Components

Applications:

• Electrical Motors
• generators
• alternators
• ballasts
• small Transformers etc.

Product Details:

We are currently manufacturing a range of Tanqential Cross Flow Fans.


Note - We customized the product as per client requirement.

Operating Temperature Range	60 Deg C to 180 Deg C
Thermistor Mounting	Probe
Surface Finish	Teflon Coated
Wire Connection	Solder/Wire Bound

Product Description:

Owing to perfection and quality oriented approach, we have carved niche in the industry by offering Thermistors. The offered thermistor is has low differential temperature for electronic applications. This thermistor is manufactured from the current techniques & quality material keeping in mind the set norms of industry. We provide this thermistor in a promised time frame to clientele.

Features:

• Easy installation
• Customized lead lengths
• Easy usage

Other Details:

• Available in Single, Double & Triple Adaptor etc. versions
• Customized lead lengths
• Cost effective
• Wide range of switching temperatures from 50°C to 160°C
• Excellent accuracy and longer life
• Low differential temperature for electronic applications
• Very economics

Applications:

• Electric Motor
• Transformers
• Alternators
• Welding Machines
• UPS / SMPS and Many More
• Paper Mills
• Sugar Mills
• Cement Factories
• Rubber Factories
• Steel Industries

Cable Tray Coating	Galvanized Coating, Hot-Dip Galvanized
Tray Type	Wire Mesh Cable Tray, Ladder Type Cable Tray, Trough Cable Tray
Material	Steel, Stainless Steel, Fiber Reinforced Plastic (FRP), Aluminum

Product Description:

Cable Trey: cable tray system is “a unit or assembly of units or sections and associated fittings forming a rigid structural system used to securely fasten or support cables and raceways.
Cable Trays are available in different sizes as per the customer specifications. We export cable trays in the following thicknesses - 1.6 mm, 2.0 mm, 2.5 mm, and 3.0 mm. & width - 50 mm to 1000 mm, cable trays are available in form of Hot dip galvanized, powder coated, painted & Pre Galvanized Sheet etc.
The cable tray accessories for perforated ladder type cable trays are vertical bends, horizontal bends, inside bends, outside bends, reducers with radius 300, 600, 900 are available.

Types of Cable Tray

• Perforated Cable Tray
• Ladder Type Cable Tray
• Cable Raceway

Applications:

1. Electrical wires
2. Communication Wire etc