Have a requirement?
Chat with us
Have a requirement?
Chat with us
Sensors
TTP224 4 Way Touch Sensor
₹ 70.80/PieceGet Latest Price
| Model Number | TTP224 |
| Channels | 4 |
| Input Voltage | 2.0 to 5.5 V DC |
| Response time | 60 - 220 ms |
| Interface | IC |
| Color | Blue |
| Operating Temperature | -20 to +70 deg C |
| Dimensions | 35 x 29 mm |
| Sensor Type | Touch |
The TTP224 is a touch pad detector IC which offers 4 touch key. The touching detection IC is designed for replacing traditional direct button key with diverse pad size. Capacitive touch allows electronics to sense when your finger is within a few millimetres of a surface to simulate a button “press” just like how the pushbutton works. Capacitive sensing may be used in any place where low to no force human touch sensing is desirable.
Specifications
- On-board TTP224 capacitive touch 4 key induction IC
- On-board 4 road level indicator.
- Working voltage: 2 V to 5.5 V DC Adjustable output mode, key output mode, longest time and fast/low power output
- PCB board size: 35(mm) x29 (mm).
View Complete Details
DHT22 Digital Temperature and Humidity Sensor Module AM2302
₹ 325/PieceGet Latest Price
| Type | Temperature Sensor Module |
| Usage/Application | Temperature Measurement |
| Brand | Generic |
| Part Number | DHT 22 |
The DHT22 Digital Temperature and Humidity Sensor Module AM2302 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.
Simply connect the first pin on the left to 3-5V power, the second pin to your data input pin and the rightmost pin to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin!
Additional Information:
- Production Capacity: 100
- Delivery Time: 2 Days
View Complete Details
5MM Mini LDR
₹ 4.72/PieceGet Latest Price
| Type | LDR Sensor |
| Brand | Generic |
| Working Current | 50 m |
| Max. Power Dissipation | 100mW |
| Size | 5mm (Diameter) |
| Max. Overload Voltage | 150 V |
| Application | Home Automation |
| Weight | 0.01 Kg |
| Number of Pin | 2 |
With vast industrial experience, we are involved in offering a wide range of Mini Light Dependent Resistor.LDR (Light Dependent Resistor) is a resistor whose resistance varies inversely with the amount of light falling on it. It is also known as photo resistor, photocell, photo conductive cell etc. LDR are available in 5mm, 8mm, 12mm and 25mm dimensions.
LDR is made of high resistance semiconductor material. Semiconductor material used for the photo resistors is cadmium sulphide, CdS. When it’s dark, LDR has high resistance known as dark resistance. Usually dark resistance will be in the range of mega ohms. When light falls on LDR, resistance reduce to kilo ohms range.
Additional Information:
- Production Capacity: 100
- Delivery Time: 5 days
View Complete Details
| Usage/Application | Light Sensor,Light Intensity Meter |
| Diameter | 20 mm |
| Voltage | 500V(Max Voltage) |
| Mounting | PCB Through Hole |
| Operating Temp | -30 to +70 Degree Celsius |
| Pin Count | 2 |
Since our commencement, we are immersed in presenting an elite array of 20 MM Light Dependent Resistor.
LDR (Light Dependent Resistor) is a resistor whose resistance varies inversely with the amount of light falling on it. It is also known as photo resistor, photocell, photo conductive cell etc. LDR are available in 5mm, 8mm, 12mm and 25mm dimensions.
LDR is made of high resistance semiconductor material. Semiconductor material used for the photo resistors is cadmium sulphide, CdS. When it’s dark, LDR has high resistance known as dark resistance. Usually dark resistance will be in the range of mega ohms. When light falls on LDR, resistance reduce to kilo ohms range.
View Complete Details
| Usage/Application | Tank Level Measurement |
| Type | Magnetic |
| Brand | Generic |
| Material | Plastic |
| Wire Length | 15cm |
| Detection Area | 100m |
| Temperature | 10-85 Degrees |
A float sensor is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices. Magnetic float sensor is an electromagnetic ON/OFF switch. It helps to sense the level of water present in the overhead tank or sump. These sensors have a permanent magnet in the float. The Switch is present in the white stem of the sensor. As the float rises or falls with the level of water in the tank, the switch gets activated by the magnet in the float, thereby the signal which is obtained from the sensors is used along with the water level controllers for controlling the motor pump.
Additional Information:
- Production Capacity: 100
- Delivery Time: 5 days
View Complete Details
| Part Number | TSOP 1738 |
| Supply Voltage | 5 V DC |
| Power consumption | 0.4 to 1.0 mA |
| Min Radiation | 0.35 mW/m2 |
| Angle of detection | 90 degrees |
The TSOP 1738 Sensor From Tomson Electronics, Kochi, Kerala, Karnataka, India is a miniaturized receiver for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by an Arduino or Raspberry PI. TSOP is the standard IR remote control receiver series, supporting all major transmission codes.
Additional Information:
- Production Capacity: 100
- Delivery Time: 5 days
View Complete Details
DHT 22 Digital Temperature and Humidity Sensor
₹ 300/PieceGet Latest Price
| Usage/Application | Temperature Measurement |
| Brand | Generic |
| Type | Temperature Sensor |
| Part Number | DHT 22 |
| Mounting Type | Pin |
| Material | Plastic |
| Model Name/Number | Dht 22 |
The DHT22 is a basic, low-cost digital temperature and humidity sensor now available in stock at Tomson Electronics, Kochi, Kerala, India. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin. It is very simple to use with an Arduino or Raspberry Pi but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using a library, sensor readings can be up to 2 seconds old.
Additional Information:
- Production Capacity: 50
- Delivery Time: 2 Days
View Complete Details
LM35 Temperature Sensor
₹ 40/PieceGet Latest Price
| Usage/Application | Temperature Measurement |
| Type | Temperature Sensor |
| Maximum Operating Supply Voltage | 30 V |
| Model Name/Number | LM35 |
| Output Type | Analog Voltage |
| Package Type | Box |
| Features | Calibrated directly in Degree Celsius,Low Self-Heating |
| Weight | 0.01 Kg |
By keeping track of current market development, we are into offering an excellent range of LM35 Temperature Sensor.
View Complete Details
| Brand | ADIY |
| Model | HC SR 04 |
| Operating Voltage | 5V DC |
| Operating Current | 15 mA |
| Working Frequency | 40 Hz |
Ultrasonic ranging sensor available at Tomson Electronics, Kochi, Kerala, India is an economical sensor module that provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an ultrasonic transmitter, a receiver and a control circuit.
There are only four pins that you need to worry about on the HC-SR04: VCC (Power), Trig (Trigger), Echo (Receive), and GND (Ground). You will discover this sensor simple to set up and use for your next range-discovering venture utilizing an Arduino or Raspberry Pi.
Additional Information:
- Delivery Time: 2-3 Days
View Complete Details
HC-SR505 PIR Sensor
₹ 118/PieceGet Latest Price
| Model Name/Number | HC-SR505 |
| Feature | Low Power Consumption, Automatic Control |
| Operating Temperature | -20 Degree Celsius to +80 Degree Celsius |
| Voltage | DC 4.5-20 V |
| Induction Angle | 100 Degree Cone Angle |
| Sensing Distance | 3 meters |
| Board Dimension | 10 x 23 mm |
| Trigger | Reusable trigger (default) |
| Quiescent Current | Less than 60 Micro A |
Catering to the requirements of our clients, we are offering HC-SR505 PIR Sensor.
View Complete Details
| Usage/Application | Automation |
| Model/Type | HC SR 501 |
| Type | Motion Sensor |
| Brand | Generic |
| Range | 4 Mtr |
The PIR Sensor module allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor's range. It is often referred to used "PIR", "Pyroelectric", "Passive Infrared" and "IR Motion" sensor.The module has an on-board pyroelectric sensor, conditioning circuitry and a dome shaped Fresnel lens.The PIR sensor module provides an output "HIGH" when a human body is detected within its range and an automatic Delay "LOW" when the body leaves its range. The delay time is adjustable using the potentiometer on-board. The minimum delay time that can be set is 5 seconds and maximum of 200 seconds.
Additional Information:
- Production Capacity: 100
- Delivery Time: 2 Days
View Complete Details
need
details