Tools Traders Turbhe Private Limited

Blade: High quality chrome-vanadium-molybdenum steel, through hardened, black-finish. Protective insulation moulded directly onto the blade and completely integrated into the blade in the lower area.

Handle: Ergonomic Wiha Soft Finish® multi- component handle with roll-off protection.

Standards: DIN ISO 8764. Manufactured ACC. to IEC 60900:2004.

Application: For all work on or around electrical components up to 1000 V AC.

Order No.     Size

35395          PZ1

35396          PZ2

BladeHigh quality chrome-vanadium-molybdenum steel, through hardened, black-finish. Insulation moulded directly onto blade.

HandleErgonomic Wiha SoftFinish multi- component handle with roll-off protection.

StandardsDIN ISO 8764. Manufactured ACC. to IEC 609002004.

ApplicationFor all work on or around electrical components up to 1000 V AC.

Order No. Pozidrive

00877 PZ0

00878 PZ1

00879 PZ2

00880 PZ3

BladeHigh quality chrome-vanadium-molybdenum steel, through hardened, black-finish. Insulation moulded directly onto blade.

HandleErgonomic Wiha Soft Finish multi-component handle with roll-off protection.

StandardsManufactured acc. to IEC 609002004.

ApplicationFor fastening and unfastening internal square-drive (Robertson) screws.

Order No.

32396 Robertson 1 2.3

32397 Robertson 2 2.8

• One pair (red, black) of comfort grip probes
• 48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
• Recommended for general purpose measurements
• CAT II 1000 V, , 10 A rating
• CAT IV 600 V, CAT III 1000 V only with protective cap
• CSA listed

Standards: DIN ISO 5749. Manufactured acc. to IEC 60900:2004.

Head shape: Semi-circular.

Design: Low wear lap joint, riveted and able to withstand high levels of load. Lightweight action, clean cutting achieved by specially milled precision cutting edges. Long term cutting is achieved through additional inductive hardening to approx. 64 HRC. The Wiha DynamicJoint ensures optimal transmission of hand strength to the cutting edges.

Material: High-quality tool steel, specially tempered.

Application: Power-assisted all-round diagonal cutter for cutting soft to extremely hard wires and cables. For all work on or around electrical components up to 1000 V AC.

Order No.    Size(mm)

26748            160

26751            180

26754            200

Head shape: Classic cutting form.

Design: Light, energy-saving and clean cutting with specially ground precision cutting edges. Durable cutting edges due to additional induction hardening to approx. 62 HRC. Safety stop prevents finger injuries after cutting.

Material: High-quality tool steel, tempered.

Application: Cable cutter for cutting of copper and aluminium cables without crushing, also suitable for stripping. Not for steel cable, wires and copper conductors with hard coatings.

Order No.     Size(mm)

34729           160

34730           200

Slotted/Philips

Handle: Ergonomic Wiha Soft Finish® multi- component handle with roll-off protection.

Bit holder: Stainless steel with strong magnet.

Suitable for: DIN 3126, ISO 1173, style D 6.3.

Bits: 25 mm Standard bits.

Application: The alternative to a screwdriver set. Six drive shapes in one screwdriver. For working in confined spaces.

Order No. 33736

Set Contents

Slotted  7010 Z   1 x 4.5   1 x 6.5   1 x 8.0

Philips   7011 Z   1 x PH1   1 x PH2  1 x PH3

Standards: DIN ISO 5749.

Head shape: Semi-circular, swedish style.

Design: Low wear lap joint, riveted and able to withstand high loads. The Wiha DynamicJoint ensures optimal transmission of hand strength to the cutting edges. Lightweight action, clean cutting achieved by specially milled precision cutting edges. Durable cutting edges due to additional induction hardening to approx. 62 HRC.

Material: High-quality tool steel, tempered.

Application: For soft and hard wires.

Order No.      Size(mm)

26736           140

26740           160

26743           180

Standards: DIN ISO 5749. Manufactured acc. to IEC 60900:2004.

Head shape: Semi-circular, swedish style.

Design: Low wear lap joint, riveted and able to withstand high loads. Lightweight action, clean cutting achieved by specially milled precision cutting edges. Durable cutting edges due to additional induction hardening to approx. 62 HRC. The Wiha DynamicJoint ensures optimal transmission of hand strength to the cutting edges.

Material: High-quality tool steel, tempered.

Application: Universal cutter for cutting soft and hard wires and cables, also suitable for cutting and stripping cables. For all work on or around electrical components up to 1000 V AC.

Order No.      Size(mm)

26737            140

26741            160 

26744            180

Standards: DIN ISO 5749.

Head shape: Semi-circular, swedish style.

Design: Low wear lap joint, riveted and able to withstand high loads. The Wiha Dynamic Joint ensures optimal transmission of hand strength to the cutting edges. Lightweight action, clean cutting achieved by specially milled precision cutting edges. Durable cutting edges due to additional induction hardening to approx. 62 HRC.

Material: High-quality tool steel, tempered.

Application: For cutting of soft and hard wire.

Order No.   Size(mm)

26738          140

26739          160

26742          180

Blade: High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated. Colour- coded Wiha Chrom Top® tips. Blade length is adjustable from 18 - 90 mm.

Handle: System 4 Soft Finish®-telescopic handle. Click Stop ball clamp guarantees a secure hold and rapid blade exchange.

Order No. 27820

Set Contents

2691  System 4 Soft Finish Telescopic Handle

Slotted  269  1.5-3.0  2.0-3.5  2.5-4.0

Philips   269  PH000-PH00 PH0-PH1 

TORX    269  T6-T8   T7-T9

Hex      269   1.5-1.5   2-2   2.5-2.5

2893S01 Wiha Torque Vario -ST Plus T-Handle Torque Tool Set, 11 Pcs

Handle: Model 5-14 Nm. Window scale displays torque value numerically. Torque infinitely adjustable with Torque-Setter setting tool (also supplied). Soft-grip T-handle for extreme comfort and optimal torque transmission.

Standards: Based on EN ISO 6789, BS EN 26789, ASME B107.14M.

Accuracy: ±6%, traceable to national standards.

Application: For applications where recommended torque settings are important.

Order No. 29234

Set Contents

2893 Torque Vario -ST plus T-handle torque tool,

         model 5-14 Nm 

289-900 Torque-T plus Setter

2899  Torque-T plus adapter Blade     1/4"    3/8"

2899  Torque-T plus bit quick release holder 1/4"

Torx 7015 Z  T25 x 25  T30 x 25  T40 x 25

Hex  7013 Z  4,0 x 25  5,0 x 25  6,0 x 25

Standards: DIN ISO 5254.

Head shape: Angled form.

Design: Drop forged, cylindrical precision tips.

Material: Chrome-vanadium tool steel.

Application: For fitting / removing circlips externally to / from shafts or axles.

Order No.   MM

26794       139 

26795       140 

26796       180 

26797       225

29429       310

Standards: DIN ISO 5254.

Head shape: Straight shape.

Design: Drop forged, cylindrical precision tips.

Material: Chrome-vanadium tool steel.

Application: For fitting / removing circlips externally to / from shafts or axles.

Order No.   MM

26789       139 

26790       140 

26791       180

26792       225

29428       310 

Standards: DIN ISO 5254.

Head shape: Straight shape.

Design: Wiha Magic Tips – highly resilient precision tips manufactured from special high performance steel. {%s} High wear resistance with additional hardening of tips. Slim plier head for optimal access and a good view of the workpiece. Spring protected in the joint, cannot be lost.

Material: Chrome vanadium tool steel, tempered.

Application: For fitting / removing circlips externally to / from shafts or axles.

Order No.    MM

34698        140 

34699        140

34700        185 

34701        240

34702        300

Standards: DIN ISO 5256.

Head shape: Straight shape.

Design: Wiha Magic Tips – highly resilient precision tips manufactured from special high performance steel. {%s} High wear resistance with additional hardening of tips. Slim plier head for optimal access and a good view of the workpiece.

Material: Chrome vanadium tool steel, tempered.

Application: For inserting / removing circlips from inside bores.

Order No.   MM

34688        140

34689        140   

34690        180

34691        220

34692        305 

Blade: High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated. Wiha ChromTop® finish on tip for a perfect fit every time.

Handle: Precision handle with rotating cap, surface resistance 10^6 - 10^9 ohms.

Standards: IEC 61340-5-1.

Application: For working on electrostatically sensitive components.

Order No.  32278

Hex  275  0.9 x 40  1.3 x 40  1.5 x 50                          2 x 50   2.5 x 60   3 x 60

Blade: High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated. Wiha Chrom Top® finish on tip for a perfect fit every time.

Handle: Ergonomic Wiha Soft Finish® multi-component handle with roll-off protection. Surface resistance 10^6 - 10^9 ohms.

Standards: IEC 61340-5-1.

Application: For working on electrostatically sensitive components.

Order No.  27253

Set Contents

TORX  362ESD  T6 x 60  T8 x 60  T9 x 60

                       T10 x 80  T15 x 80

Blade: High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated. Wiha Chrom Top® finish on tip for a perfect fit every time.

Handle: Precision handle with rotating cap, surface resistance 10^6 - 10^9 ohms.

Standards: IEC 61340-5-1.

Application: For working on electrostatically sensitive components.

Order No.  08463

Set Contents

Slotted  272  1.5 x 40  2.0 x 40   2.5 x 50  

                   3.0 x 50

Philips   273  PH00 x 40  PH0 x 50

Standards: Manufactured according to EN/IEC 60900:2004.

Material: Chrome vanadium steel.

Case: Practical, rugged plastic box. Orderly, clearly laid-out arrangement of the tools for fast, clean work.

Application: Safe installation of terminals and sleeves. For all work on or around electrical components up to 1000 V AC.

Order No.  33181

Set Contents

Hexagonal  5589N  8  10  12  13  14  17  19

Standards: Manufactured according to EN/IEC 60900:2004.

Material: Chrome vanadium steel, oil-hardened.

Pouch: Practical, space-saving roll-up bag for the workbench and on the road.

Application: Safe installation of terminals and sleeves, especially for cable-branch clamping rings. For all work on or around electrical components up to 1000 V AC.

Order No.  33182

Set Contents

Hex 352N   3  4  5  6  8  10  12

325NK601 Wiha Soft Finish Electric Torx Screwdriver Set, 6 Pcs

Blade: High quality chrome-vanadium-molybdenum steel, through hardened, black-finish. Insulation moulded directly onto blade.

Handle: Ergonomic Wiha Soft Finish® multi- component handle with roll-off protection.

Standards: Manufactured ACC. to IEC 60900:2004.

Application: For all work on or around electrical components up to 1000 V AC.

Order No.  29465

TORX  325  T8 x 60  T9 x 60  T10 x 60

                 T15 x 80  T20 x 80  T25 x 80

Blade: Chrome-vanadium steel, through hardened, black-finish. Insulation moulded directly onto blade.

Handle: Impact, oil and grease resistant Wiha Classic handle.

Standards: Manufactured ACC. to IEC 60900:2004.

Application: For all work on or around electrical components up to 1000 V AC.

Order No. 07151

Set Contents

Slotted  320  2.8 x 75  4.0 x 100  5.5 x 125  

                    6.5 x 150

Philips  321  PH1 x 80  PH2 x 100

Slotted  255-3  3.0 x 65

Blade: Chrome-vanadium steel, through hardened, black-finish. Insulation moulded directly onto blade.

Handle: Impact, oil and grease resistant Wiha Classic handle.

Standards: Manufactured ACC. to IEC 60900:2004.

Application: For all work on or around electrical components up to 1000 V AC.

Order No. 00815

Slotted  320  2.8 x 75  4.0 x 100  5.5 x 125

                   6.5 x 150  

Philips  321  PH1 x 80  PH2 x 100

Blade: High quality chrome-vanadium-molybdenum steel, through hardened, black-finish. Protective insulation moulded directly onto the blade and completely integrated into the blade in the lower area.

Handle: Ergonomic Wiha Soft Finish® multi- component handle with roll-off protection.

Standards: Manufactured ACC. to IEC 60900:2004.

Application: For all work on or around electrical components up to 1000 V AC.

Order No.    35389

Set Contents

Slotted    3201   3.5 x 100    4.0 x 100   5.5 x 125                                6.5 x 150

Philips     3211    PH1 x 80   PH2 x 100 

Blade: High quality chrome-vanadium-molybdenum steel, through hardened, black-finish. Insulation moulded directly onto blade.

Handle: Ergonomic Wiha Soft Finish® multi- component handle with roll-off protection.

Standards: Manufactured ACC. to IEC 60900:2004.

Application: For all work on or around electrical components up to 1000 V AC.

Order No.  00834

Set Contents

Slotted 320N   2.5 x 75  4.0 x 100  5.5 x 125  

                        6.5 x 150

Philips  321N      PH1 x 80  PH2 x 100

Slotted  255-11  3.0 x 65

Blade: High quality chrome-vanadium-molybdenum steel, through hardened, black-finish. Insulation moulded directly onto blade.

Handle: Ergonomic Wiha Soft Finish® multi- component handle with roll-off protection.

Standards: Manufactured ACC. to IEC 60900:2004.

Application: For all work on or around electrical components up to 1000 V AC.

Order No. 00833

Set Contents

Slotted  320N  3.0 x 100  4.0 x 100  5.5 x 125                      6.5 x 150

Philips   321N  PH1 x 80  PH2 x 100   

Blade: Chrome-vanadium steel, through hardened, black-finish. Insulation molded directly onto blade.

Handle: Ergonomic Wiha Soft Finish® multi- component handle with roll-off protection.

Standards: Manufactured ACC. to IEC 60900:2004.

Application: For internal hex screws.

Order No.    Hex

30361         2.5

30362         3.0 

30363         4.0 

30364         5.0

30365         6.0

30366         8.0 

BladeHigh quality chrome-vanadium-molybdenum steel, through hardened, black-finish. Insulation moulded directly onto blade.

HandleErgonomic Wiha Soft Finish multi- component handle with roll-off protection.

StandardsDIN ISO 8764. Manufactured ACC. to IEC 609002004.

ApplicationFor all work on or around electrical components up to 1000 V AC.

Order No. Philips

00846 PH0

00847 PH1

00848 PH2

00849 PH3

00850 PH4

Wiha crimping tools for non-isolated cable eyes with closed sleeve

Standards: Non-isolated cable eyes with closed crimping sleeve according to DIN 46234 / DIN 46230 / DIN 46341.

Head shape: W injection, radial pressing.

Design: Crimp profile: Profile 1. 0.1 - 0.5 mm² / AWG 26 - 20 Profile 2. 0.5 - 2.5 mm² / AWG 20 - 14 Profile 3. 4.0 - 6.0 mm² / AWG 12 - 10 Profile 4. 10.0 - 16.0 mm² / AWG 8 - 6 Delockable force lock for ensuring complete crimping process; required crimp pressure is factory set. Ergonomically formed soft handle with slip protection for especially comfortable handling.

Material: Of high-tensile special steel. Parts subject to extreme loading are specially hardened and tempered.

Application: For processing of non-isolated cable eyes, pin-end cable connectors, batch connectors and mini cable eyes. For solderless electrical connections according to standards.

Order No.     Size(mm)

33843            220

Standards: Non-isolated contact pin according to DIN 46247.

Head shape: B-crimp, radial pressing. Conducting and isolating crimp are carried out in one work step.

Design: Crimp profile: Contact width 6.3 / 9.5 mm Profile 1. 0.25 - 0.5 mm² / AWG 22 - 20 / F 6.3 + 9.5 Profile 2. 0.5 - 1.0 mm² / AWG 20 - 16 / F 6.3 + 9.5 Profile 3. 1.5 - 2.5 mm²/ AWG 16 - 14 / F 6.3 + 9.5 Profile 4. 4.0 - 6.0 mm² / AWG 12 - 10 / F 6.3 + 9.5 Delockable force lock for ensuring complete crimping process; required crimp pressure is factory set. Ergonomically formed soft handle with slip protection for especially comfortable handling.

Material: Of high-tensile special steel. Parts subject to extreme loading are specially hardened and tempered.

Application: For processing of non-isolated contact pins and contact pin sleeves for standardised, solderless electrical connections.

Order No.    Size(mm)

33842          220

Standards: Isolated cable eyes and connectors according to DIN.

Head shape: Oval crimp, radial pressing. Conducting and isolating crimp are carried out in one work step.

Design: Crimp profile: Red profile: 0.5 - 1.0 mm² / AWG 20 - 16 Blue profile: 1.5 - 2.5 mm²/ AWG 16 - 14 Yellow profile: 4.0 - 6.0 mm² / AWG 12 - 10 Delockable force lock for ensuring complete crimping process; required crimp pressure is factory set. Ergonomically formed soft handle with slip protection for especially comfortable handling.

Material: Of high-tensile special steel. Parts subject to extreme loading are specially hardened and tempered.

Application: For processing of red, blue and yellow isolated cable eyes, pin-end cable connectors, contact pins, contact pin sleeves, circular pins, circular pin sleeves, batch connectors and parallel connectors. For standardised, solderless electrical connections.

Order No.   Size(mm)

33841          220

Standards: Manufactured ACC. to IEC 60900:2004.

Head shape: Classic cutting form.

Design: Light, energy-saving and clean cutting with specially ground precision cutting edges. Durable cutting edges due to additional induction hardening to approx. 62 HRC. Safety stop prevents finger injuries after cutting.

Material: Special tool-steel, hardened & tempered.

Application: Cable cutter for cutting of copper and aluminium cables without crushing, also suitable for stripping. Not for steel cable, wires and copper conductors with hard coatings. For all work on or around electrical components up to 1000 V AC.

Order No.     Size(mm)

34743             160

34744             200 

Blade: Chrome-vanadium steel, through hardened, black-finish.

Handle: Wiha key handle.

Application: For high torque transfer with small screws, especially when replacing indexable inserts on milling heads.

Order No. 25624

Set Contents

TORX  365

T6 X 35   T7 X 35   T8 X 40   T9 X 40   T10 X 40

T15 X 45   T20 X 45