Tools Traders Turbhe Private Limited

Suitable for industrial and commercial production and assembly applications. Side handle for two handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and three position power regulator. Top venting exhaust. Oiling points for daily maintenance.

Specifications:
Free speed: 3,300rpm.
Final drive: 1" (25mm) hex.
Working torque: 2,030Nm (1500lb.ft.).
Maximum torque: 2,300Nm (1700lb.ft.).
Safe working pressure: 90psi (6.2bar).
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2" (13mm).
Air pressure: 90PSI (6.3Bar).
Air consumption: 0.7CFM.
Sound pressure level: 87dB(A).
Vibration level: 5.9m/s2.
Overall length: 500mm.
Weight: 9.34kg.

Compact and lightweight for easy access in restricted areas. Uses both 2" and 3" backing pads. Rubber handle provides grip and operator comfort. Two finger throttle for easier control and less fatigue. Adjustable power regulator to match the speed to the job. Silenced Handle Exhaust directs air away from the Workpiece. Ball bearing construction for a long tool life.

FOS003mk Sander.
Free speed: 15,000rpm.
Air inlet thread: 1/4 NPT.
Minimum air hose size (ID): 3/8 (10mm).
Air pressure: 90PSI/6.2Bar.
Air consumption: 4CFM*.
Sound pressure level: 87dB(A).
Sound power level: 94dB(A).
Vibration level: 0.9m/s2.
Net weight: 611gm.

Kit contains:
1x mini orbital sander.
2 and 3 backing pads.
10x 2 320, 400 and 600 grit sand paper.
10x 3 320, 400 and 600 grit sand paper.
Spindle key and comprehensive instructions.
Robust blow moulded carry case.

*Based on a 15 second cycle per minute average use.

Heavy duty reverse action pistol grip screwdriver suitable for production and assembly applications. Push to start type with auto shut-off clutch for precision applications. 3 interchangeable torque springs allow for easy conversion for new applications. 1/4" hex drive. External torque adjustment does not require disassembly of the tool. Variable speed throttle. Ergonomically contoured grip for operator comfort. Handle exhaust directs air away from the workpiece and operator. Hanging ring included.

CSP005S.
Chuck size: 1/4'(6mm) Hex.
Air inlet thread: 1/4' NPT.
Minimum air hose size (ID): 3/8 (10mm).
Green torque spring: 0.6-2.1Nm (5-1in/Lbs).
Black torque spring: 1.1-4.3Nm (10-38in/Lbs).
Yellow torque spring: 1.7-5.1Nm (15-45in/Lbs).
Air pressure: 90psi/6.2bar.
Air consumption: 4CFM.
Sound pressure level: 84dB(A).
Sound power level: 93dB(A).
Vibration level: 0.5 m/s2.
Overall length: 210mm.
Net weight: 815g.

Suitable for the removal and installation of threaded fasteners when doing automotive and light assembly work. Reversible hardened steel square drive. Rubber handle provides grip and operator comfort with reduced hand chill. Three planetary gears for longer life and smoother running. Rubber cover protects the ratchet head and the workpiece. Short body length allows access into hard to reach areas. Low profile teasing throttle for precise speed control. Rotating rear exhaust with baffle for reduced noise. Rotating air inlet to prevent the air hose tangling. Adjustable air regulator.

3/8" Square Drive
Specifications:
Working torque range: 7-27Nm (5-20ft-lbs).
Anvil size: 3/8".
Free speed: 200rpm.
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 10mm (3/8").
Air pressure: 6.2bar (90psi).
Air consumption: 113Ltr/m (4CFM)*.
Sound power level: 88dB(A).
Sound pressure/noise level: 84dB(A).
Vibration level: 1.8m/s2.
Overall length: 205mm.
Net weight: 640g.
*Based on a 15 second cycle per minute average use.

Order Code for 3/8" Square Drive:KBE-270-2360K

1/2" square drive
Specifications:
Working torque range: 14-68Nm (10-50ft-lbs).
Anvil size: 1/2".
Free speed: 150rpm.
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 10mm (3/8').
Air pressure: 6.2bar (90psi).
Air consumption: 113Ltr/m (4CFM)*.
Sound power level: 87dB(A).
Sound pressure/noise level: 80dB(A).
Vibration level: 2.6m/s2.
Overall length: 265mm.
Net weight: 1.20kg.
*Based on a 15 second cycle per minute average use.

Order Code for 1/2" square Drive:KBE-270-2300K

One piece aluminium housing, 10 position power regulator and thumb switch for reversing.

Specifications:
Bolt capacity: 16mm.
Torque: 325 Nm.
Air inlet thread: 1/4" NPT.
Air hose size (ID): 8mm.
Air pressure: 90PSI.
Air consumption: 4CFM*.
Overall length: 191mm.
Weight: 2.4kg.
Noise level: 88dB(A).
Vibration: 4.2m/s2.
For a complete range of 1/2'' drive impact sockets see product group KEN-583.

*Based on 15 second cycle per minute average use.