Trident Electro Components

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Delivery Time: ready stock
• Packaging Details: tube

The SN74HC244N is a high-speed CMOS octal buffer/line driver with 3-state outputs, designed to improve data bus driving in digital systems. It’s commonly used to isolate, buffer, and drive signals across a shared data bus, especially in microcontroller or memory interfacing.

• 8 buffers arranged as two groups of four

• Non-inverting outputs

• 3-state outputs (can be disabled to prevent bus conflicts)

• Two enable pins (OE1 and OE2) control each group of 4 buffers

• Operates at 2V–6V (5V typical)

• Part of the 74HC (High-speed CMOS) family — faster than standard 4000-series CMOS

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: TUBE

The CD4094BE is an 8-stage serial-in/parallel-out or serial-in/serial-out shift register with 3-state outputs, made by Texas Instruments and others. It's often used in digital electronics to extend the number of output pins for a microcontroller or digital system.

• 8-bit shift register with latch and 3-state parallel outputs

• Serial-in/parallel-out and serial-in/serial-out operation

• Latch enable and output enable pins

• Operates over a wide voltage range: 3V to 15V

• CMOS logic family (low power consumption)

• Compatible with standard TTL outputs

Additional Information:

• Item Code: CD4094BE
• Delivery Time: READY STOCK
• Packaging Details: TUBE

PART NO: CD4026BE
MAKE: TEXAS
DESCRIPTION: Counter IC Counter, Decade 1 Element 5 Bit Positive Edge 16-PDIP

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Packaging Details: TUBE

The HEF4094BT is an 8-bit shift register with output latches and is part of the HEF40xx series of CMOS (Complementary Metal-Oxide-Semiconductor) integrated circuits (ICs) from NXP Semiconductors. This IC is primarily used for serial-to-parallel data conversion, meaning it can take in serial data (one bit at a time) and shift it through the register to output parallel data (multiple bits at once).

Additional Information:

• Packaging Details: REEL PACKING

The LNK626PG is a power IC from Power Integrations. It is part of the LinkSwitch-II family, designed for high-efficiency off-line switch-mode power supplies (SMPS) with low standby power consumption.

✔ Highly Integrated Off-Line Switcher – Includes a power MOSFET, controller, and feedback circuitry
✔ Input Voltage: 85V – 265V AC (Universal Input)
✔ Output Power:

• 5W - 6W (85V-265V AC, Adapter Applications)
• 6.5W - 8W (230V AC, Open Frame Applications)
  ✔ High Efficiency: Up to 78% efficiency
  ✔ Eco-Friendly: Less than 30 mW no-load power consumption
  ✔ Primary-Side Regulation (PSR): No need for an optocoupler
  ✔ Low EMI & Fast Startup
  ✔ Overvoltage, Overtemperature & Short Circuit Protection
  ✔ Package: DIP-8C

Additional Information:

• Packaging Details: TUBE

The CD4069BE is a hex inverting buffer IC (integrated circuit) made by Texas Instruments, part of the CD4000 series of logic ICs. It contains six independent inverters, which are digital logic gates that output the opposite (inverted) logic level of their input.

Additional Information:

• Packaging Details: TUBE

The CD1453BE is a quad 2-input NAND gate integrated circuit, part of the CD4000 series of CMOS logic gates. It contains four independent 2-input NAND gates, which are commonly used in various digital logic applications.

• 4 independent 2-input NAND gates

• CMOS technology with low power consumption and high noise immunity

• Each gate provides a NAND function, where the output is LOW only when both inputs are HIGH

• Works with supply voltages between 3V and 18V (often used at 5V or 12V)

• TTL-compatible inputs when powered with 5V

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TUBE

We are one of the reliThe CD4027BE is a dual J-K Master-Slave Flip-Flop with set and reset, part of the CMOS 4000 logic family. It includes two independent flip-flops, and it's commonly used for memory storage, toggling, counters, and frequency division applications.

• Dual J-K Flip-Flop (2 per chip)

• Master-Slave operation

• Asynchronous Set and Reset

• Toggle mode when J = K = 1

• Standard CMOS logic voltage range (typically 3V to 15V)

• Low power consumption

able companies in this domain and are offering CD4027BE IC Chip.

To furnish the ever increasing desires of our customers, we are engrossed in presenting a wide spectrum of CD4060BE IC Chip.

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

The XTR115UA is a precision sensor interface IC designed by Texas Instruments for interfacing with low-level analog sensors and converting their signals into linear output signals suitable for further processing or digital conversion. It is particularly useful in applications where high accuracy and low noise are critical, such as in industrial sensors, temperature sensors, and pressure transducers.

The XTR115UA is part of the XTR1xx series of sensor interface ICs, specifically designed for 2-wire and 4-20 mA current loop applications. This IC amplifies small sensor signals, providing a 2-wire current output or a voltage output while maintaining high precision and low drift over time.

• High-Precision Signal Conditioning: Converts low-level sensor signals into 4-20 mA or 0-5V output.
• Current Output (2-wire): Suitable for use in 4-20 mA current loops, widely used in industrial measurement and control applications.
• Wide Input Voltage Range: Works with a wide range of sensor input voltages (typically 0 to 100 mV).
• Low Offset and Drift: Designed to minimize offset voltage and drift, ensuring high measurement accuracy.
• High Common-Mode Rejection: Excellent rejection of common-mode noise, important for accurate signal conversion in noisy industrial environments.
• Low Power Consumption: Consumes minimal power, making it ideal for battery-powered applications.
• Integrated Fault Detection: Built-in open-circuit detection for sensor monitoring.
• Output Linearization: Linearizes the sensor signal and applies scaling to the output.
• Temperature Range: Suitable for industrial environments with a wide operating temperature range of -40°C to +85°C.

Additional Information:

• Packaging Details: REEL

Additional Information:

• Packaging Details: TUBE

The PIC12F617-I/P is an 8-bit microcontroller from Microchip Technology, housed in an 8-pin PDIP (Plastic Dual In-line Package). It is designed for compact, low-power embedded applications requiring analog-to-digital conversion and efficient control.

• Program Memory: 3.5 KB Flash

• Data Memory: 128 bytes RAM

• Clock Speed: Up to 20 MHz

• Operating Voltage: 2.0V to 5.5V

• I/O Pins: 6

• Package Type: PDIP-8​

• Analog-to-Digital Converter (ADC): 10-bit resolution with 4 channels

• Comparator: 1 channel

• Timers: One 8-bit timer (TMR0) and one 16-bit timer (TMR1)

• Pulse-Width Modulation (PWM): Enhanced Capture/Compare PWM module

• Communication Interfaces: I²C, SPI, and EUSART

• Low-Power Features: Power-on Reset (POR), Brown-out Reset (BOR), Watchdog Timer (WDT), Sleep mode

• Code Protection: Yes

• In-Circuit Serial Programming™ (ICSP™): Supported

Additional Information:

• Packaging Details: TUBE

The Microchip TC7117CPL is a 3½-digit CMOS analog-to-digital converter (ADC) designed to directly drive common anode LED displays. It integrates all necessary components for precision measurement systems, including a voltage reference, clock circuit, and display drivers.

• Display Capability: Directly drives LED displays with 8 mA per segment.

• Input Impedance: High-impedance differential inputs with 1 pA leakage current and 10¹² Ω input impedance.

• Noise Performance: 15 µV peak-to-peak noise ensures stable readings.

• Auto-Zero Function: Eliminates the need for manual zero adjustment.

• Polarity Indication: Provides true polarity indication for precision null applications.

• Power Supply: Operates on a dual ±5 V supply.

• Package: 40-pin PDIP (Plastic Dual In-line Package).

• Temperature Range: 0°C to +70°C.

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: TUBE

• Configuration: 8:1 multiplexer/demultiplexer (SP8T)

• Control Inputs: Three binary address inputs (S1, S2, S3) and one enable input (E)

• On-Resistance: Typically 175 Ω

• Bandwidth: Up to 70 MHz

• Crosstalk: Approximately -50 dB at 1 MHz

• Package Type: SOIC-16 (Surface-Mount)

• Operating Temperature Range: -40°C to +125°C

• Part Number: HEF4051BT,653

Additional Information:

• Packaging Details: REEL

​The MAX186CCPP is a 12-bit, 8-channel analog-to-digital converter (ADC) from Maxim Integrated (now part of Analog Devices). It is designed for low-power data acquisition applications requiring multiple analog inputs.​

• Resolution: 12 bits

• Number of Channels: 8 (software-selectable)

• Sampling Rate: Up to 133,000 samples per second (133k SPS)

• Input Configuration: Unipolar/bipolar and single-ended/differential inputs

• Interface: Serial interface compatible with MICROWIRE™, QSPI™, and SPI™ protocols

• Supply Voltage: Dual ±5V or single +5V

• Power Consumption: Low power with power-down modes

• Package Type: 20-Pin Dual In-line Package (DIP)

• Operating Temperature Range: 0°C to +70°C

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TUBE

Additional Information:

• Item Code: IR2153
• Delivery Time: READY STOCK
• Packaging Details: 50 PCS TUBE

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Production Capacity: AC/DC Converters Low Power OFF-Line SMPS Primary
• Delivery Time: READY STOCK
• Packaging Details: 1000 PCS IN A BOX

The STMicroelectronics TL431ACZ is a three-terminal adjustable shunt voltage reference IC, commonly used as a programmable alternative to Zener diodes. Key specifications include an adjustable output voltage from 2.5V to 36V, a 1% tolerance, and a 1mA to 100mA sink current capability. 

Additional Information:

• Packaging Details: tape and reel

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ