Trident Electro Components

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: REEL

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Delivery Time: TUBE

The CD4053BE is a Triple 2-Channel Analog Multiplexer/Demultiplexer—basically, it contains three independent SPDT (single-pole, double-throw) analog switches in one package.

It’s similar in function to the CD4051BE but offers 2-to-1 switching instead of 8-to-1, and it does this three times independently.

• Type: Analog multiplexer/demultiplexer

• Switches: 3 independent SPDT switches

• Control: One control line per switch (A, B, C)

• Enable (INH): When high, all switches are turned off

• Bidirectional: Can pass analog or digital signals both ways

• Low ON Resistance: ~180 ohms at 15V

• Operating Voltage: 3V – 18V

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TUBE

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: TUBE

The CD4047BE is a monostable/astable multivibrator.
That means it can function as:

• A one-shot pulse generator (monostable mode)

• A free-running oscillator (astable mode)

It’s highly versatile for generating precise timing signals, clock pulses, and PWM-like waveforms.

Additional Information:

• Delivery Time: READT STOCK
• Packaging Details: TUBE

The SN74HC541N is an octal buffer/driver with 3-state outputs.

• Octal = 8 buffers (8 inputs and 8 outputs).

• Buffer/driver = strengthens signals (helps drive higher current loads, or longer wires).

• 3-state outputs = each output can be high, low, or high-impedance (useful for sharing bus lines).

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TUBE

The SN74HC374N is an octal D-type flip-flop with 3-state outputs.

• Octal: 8 flip-flops in one package.

• D-type flip-flop: Each flip-flop stores 1 bit of data. The output reflects the stored data until it is updated.

• 3-state outputs: The outputs can be high, low, or high-impedance (useful for bus systems).

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TUBE

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TUBE

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Packaging Details: TUBE

• Wide range of digital and analog signal levels:
  • Digital: 3V to 20V
  • Analog: ≤ 20VP-P
• Single supply range : 3V to 20V (performance degrades for VDD < 3V)
• Dual Supply range: ± 3V to ± 10V
• Low ON resistance, 125Ω (typical) over input range for VDD = 15V
• Low channel leakage of ±10pA (typical) at VDD = 15V
• Low quiescent power dissipation : 0.2µW (typical)
• Break-before-make switching eliminates channel overlap
• Bidirectional signal path
• ESD protection HBM: 3000V, CDM: 2000V
• Pin compatible with industry standard 4051 muxes

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: TUBE

​The MAX529CWG is an 8-bit octal digital-to-analog converter (DAC) from Maxim Integrated (now part of Analog Devices). It features eight independent DAC channels with buffered voltage outputs, all accessible via a serial SPI interface. This makes it ideal for applications requiring multiple analog outputs, such as waveform generation, motor control, and instrumentation.​Jotrin Electronics

• Resolution: 8 bits

• Channels: 8 independent DACs

• Interface: SPI-compatible serial interface

• Output Type: Buffered voltage output

• Settling Time: 3 µs

• Supply Voltage:

  • Analog: ±5V or +5V single supply

  • Digital: 5V

• Package: 24-pin Wide-Body Small Outline Integrated Circuit (WSOIC)

• Operating Temperature Range: 0°C to +70°C

• Architecture: R-2R ladder

• INL/DNL (Integral and Differential Non-Linearity): ±0.3 LSB

Additional Information:

• Packaging Details: TUBE

The TNY280PN is a high-efficiency off-line switcher from Power Integrations, part of the TinySwitch™-III series. It's designed for AC-DC power conversion applications, offering integrated features to simplify design and reduce component count.

• Integrated Components: Combines a 700V MOSFET, PWM controller, oscillator, thermal shutdown, and fault protection into a single monolithic device.

• Output Power:

  • Open Frame (230V AC): Up to 36.5W

  • Enclosed (Universal Input): Up to 14W

• Input Voltage Range: 85V to 265V AC (universal input)

• Switching Frequency: Operates at 132kHz

• Duty Cycle: Maximum of 65%

• Fault Protection: Includes current limiting, open loop, over-temperature, over-voltage, and short circuit protection

• Topology: Flyback converter

• Package: Available in 8-PDIP-C package for through-hole mounting

• Operating Temperature: -40°C to 150°C

Additional Information:

• Packaging Details: TUBE

The TNY277PN is an energy-efficient off-line switcher from Power Integrations, part of the TinySwitch™-III family. It's designed for AC-DC power conversion applications, offering integrated features to simplify design and reduce component count.

• Integrated Components: Combines a 700V MOSFET, PWM controller, oscillator, high-voltage switched current source, current limit (user selectable), and thermal shutdown circuitry into a single monolithic device.

• Output Power: Delivers up to 13W output power.

• Input Voltage Range: 85V to 265V AC (universal input).

• Switching Frequency: Operates at 124kHz to 140kHz.

• Duty Cycle: Maximum of 65%.

• Fault Protection: Includes current limiting, open loop, over-temperature, over-voltage, and short circuit protection.

• Topology: Flyback converter.

• Package: Available in DIP-8C package for through-hole mounting.

• Operating Temperature: -40°C to 150°C.

• On-State Resistance: 11.7Ω.

• Breakdown Voltage: 700V.

Additional Information:

• Packaging Details: TUBE

The TNY264PN is a power management IC from the TinySwitch family produced by Power Integrations. It's typically used in power supply applications, especially in designs that require low standby power, efficiency, and small size. Some key features of the TNY264PN include:

1. Integrated Power Switch: It integrates a high-voltage MOSFET, reducing external component requirements.

2. Flyback Converter: It works in a flyback topology, which is common in isolated power supplies.

3. Low Standby Power Consumption: It is designed to minimize standby power loss, making it suitable for energy-efficient designs.

4. Wide Input Voltage Range: Typically, it can handle input voltages from 85V to 265V, making it versatile for use in a variety of regions worldwide.

5. Protection Features: It includes built-in protection mechanisms such as overvoltage, overcurrent, and thermal shutdown.

6. Switching Frequency: Typically operates at a fixed frequency, which helps optimize the efficiency of the converter.

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

The TNY266PN is an energy-efficient off-line switcher from Power Integrations, part of the TinySwitch™-II series. It's designed for AC-DC power conversion applications, offering integrated features to simplify design and reduce component count.

• Integrated Components: Combines a 700V MOSFET, PWM controller, oscillator, high-voltage switched current source, current limit, and thermal shutdown circuitry into a single monolithic device.

• Output Power: Delivers up to 9.5W output power.

• Input Voltage Range: 85V to 265V AC (universal input).

• Switching Frequency: Operates at 132kHz.

• Duty Cycle: Maximum of 65%.

• Fault Protection: Includes current limiting, open loop, over-temperature, over-voltage, and short circuit protection.

• Topology: Flyback converter.

• Package: Available in 8-PDIP-B package for through-hole mounting.

• Operating Temperature: -40°C to 150°C.

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Delivery Time: 2 Days
• Packaging Details: spq

The Vishay DG408DJ is an analog multiplexer switch IC that is designed to allow the routing of analog signals in various applications. It is part of the DG400 series of multiplexers from Vishay, known for their precision, low power consumption, and high-speed switching characteristics. The DG408DJ is specifically an 8-channel multiplexer capable of switching both analog and digital signals.

1. 8-Channel Multiplexer: The DG408DJ provides 8 independent channels, which can be routed to a common output. It allows one of 8 input signals to be directed to the output at any given time.

2. Low On-Resistance (R_ON): The device features a very low on-resistance, typically in the range of 50Ω. This ensures minimal signal degradation and high accuracy, which is critical for high-precision applications.

3. Low Power Consumption: The DG408DJ is designed to operate with low power consumption, making it suitable for battery-powered and energy-efficient systems.

4. Wide Supply Voltage Range: The device can operate with supply voltages ranging from +4.5V to +18V (single supply) or ±4.5V to ±9V (dual supply), providing flexibility for use in various systems.

5. High-Speed Switching: The DG408DJ is designed for high-speed switching with a transition time (t_ON) of 100ns. This makes it suitable for high-frequency analog or digital applications where fast signal routing is essential.

6. Low Crosstalk: The IC offers excellent crosstalk performance, ensuring that signals from one channel do not interfere with signals on other channels, which is particularly important in sensitive signal routing applications.

7. Wide Analog Signal Range: The multiplexer can handle analog signals with voltages up to V_DD (the positive supply voltage), making it suitable for both analog and digital signal routing.

8. Break-Before-Make Switching: The DG408DJ features break-before-make switching, meaning that the switch momentarily disconnects the current channel before connecting the next one, which helps prevent short circuits and signal distortion during switching.

9. Low Input Leakage Current: The DG408DJ features very low input leakage current, which ensures that no significant current is drawn from the input signals when the multiplexer is in the off-state.

10. Package Type: The DG408DJ is typically available in DIP-16 or SOIC-16 package options, making it easy to integrate into a variety of electronic circuits.

The Vishay DG408DJ is suitable for a wide range of applications where the routing of multiple signals is necessary. Some common uses include:

• Signal Routing in Communication Systems: The DG408DJ is often used in communication systems to select and route signals between different parts of the system.
• Data Acquisition Systems: In systems where multiple sensors or data inputs need to be sampled, the DG408DJ can be used to select which signal is passed to the ADC (analog-to-digital converter).
• Test Equipment: It is frequently used in testing and measurement equipment, where different test signals need to be routed to a common output or measurement device.
• Audio Signal Processing: The multiplexer is useful in audio systems where multiple input channels need to be switched, such as in mixers or audio routers.
• Automatic Test Systems: The DG408DJ can be used to automate the routing of different signals in test systems, allowing automated switching of input signals for analysis and measurement.

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: REEL

The CD4030BE is a quad 2-input XOR (exclusive-OR) gate, part of the CMOS 4000 logic series. It's great for digital logic design where you need XOR operations — like parity checks, bit comparison, adders, signal modulation, etc.

• 4 independent XOR gates

• Each gate has 2 inputs and 1 output

• CMOS technology (low power, wide voltage range)

• Works from 3V to 15V supply

• Logic levels are TTL-compatible in many cases

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: TUBE

The CD4071BE is a quad 2-input OR gate IC, part of the CD4000 series, which is known for its wide range of logic gates. Specifically, this IC contains four independent OR gates, each with two inputs.

Additional Information:

• Item Code: CD4071
• Production Capacity: BULK ORDER AVAILABLE
• Delivery Time: READY STOCK
• Packaging Details: TUBE

the famous CD4000 CMOS series.

Specifically, the CD4049UBE is a Hex Inverter Buffer with high-current drive. Here’s a quick breakdown:

• Hex inverter: It contains six independent inverter gates (NOT gates).

• High current capability: Can sink/source more current than typical CMOS gates — useful for driving LEDs or other loads.

• CMOS logic levels: Works over a wide voltage range (~3V to 15V, typical maximum 18V).

• Buffered outputs: Outputs are stronger (lower impedance) and less prone to noise.

• Unbuffered version: The CD4069UB is similar but without the buffering.

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TUBE

The CD4585BE is a 4-bit binary up/down counter with output carry.

• 4-bit binary counter: It can count from 0 to 15 (binary 0000 to 1111).

• Up/Down control: You can count up or down based on an external signal, giving it versatility.

• Output carry: When counting up or down, the counter will generate a carry pulse when it overflows (either after counting from 15 to 0 or 0 to 15), which can be used to trigger other events or counters.

Additional Information:

• Packaging Details: TUBE