Trident Electro Components

The LM124-N series consists of four independent, high-gain, internally frequency compensated operational amplifiers designed to operate from a single power supply over a wide range of voltages. Operation from split-power supplies is also possible and the low-power supply current drain is independent of the magnitude of the power supply voltage.

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

SN74LS74AN
TEXAS
Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-DIP (0.300", 7.62mm)

The SN74LS00N is a Quad 2-Input NAND Gate IC from Texas Instruments, part of the 74LS series of TTL logic devices. It contains four independent NAND gates, each with two inputs, and is widely used in digital electronics for implementing logic functions.​

• Logic Family: 74LS (Low Power Schottky TTL)

• Number of Gates: 4

• Inputs per Gate: 2

• Supply Voltage Range: 4.75V to 5.25V

• Output Current: 8 mA (Low), -0.4 mA (High)

• Propagation Delay: Typically 15 ns

• Operating Temperature Range: 0°C to 70°C

• Package: 14-pin DIP (Dual In-line Package)

Additional Information:

• Packaging Details: TUBE

The Nx556 and Sx556 devices provide two independent timing circuits of the NA555, NE555, SA555, or SE555 type in each package. These circuits operate in an astable or monostable mode with external resistor-capacitor (RC) timing control. The basic timing provided by the RC time constant is controlled actively by modulating the bias of the control-voltage input.

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: REEL

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: TUBE

The CD4053BE is a versatile triple 2-channel analog multiplexer/demultiplexer IC from Texas Instruments. It's widely used in applications requiring signal routing, such as audio switching, sensor interfacing, and data acquisition systems

• Configuration: Three independent single-pole double-throw (SPDT) switches (3 x 2:1)

• Operating Voltage Range: 3V to 20V

• On-State Resistance: Typically 125 Ω; maximum 240 Ω

• Bandwidth: Up to 30 MHz

• Package: 16-pin PDIP (Plastic Dual In-line Package)

Additional Information:

• Delivery Time: REAYD STOCK
• Packaging Details: TUBE

The XTR111AIDGQR is a precision current loop transmitter IC from Texas Instruments, designed for signal conditioning in industrial applications, particularly for sensor interfacing and analog-to-digital conversion. It is part of the XTR1xx series, specifically optimized for creating 4-20 mA current loop transmitters. The IC is typically used in remote sensor systems, industrial process control, and automated measurement systems where analog sensors need to be monitored and the output needs to be transmitted over long distances without signal degradation.

• Precision Signal Conditioning: Converts low-level sensor signals to 4-20 mA current for industrial current loop systems.
• High Accuracy and Low Drift: Designed with low offset voltage and minimal drift to ensure high measurement precision over a wide temperature range.
• Wide Supply Voltage Range: Operates within a broad supply range of 4V to 36V.
• Wide Temperature Range: Suitable for use in demanding environments with an operating temperature range of -40°C to +85°C.
• Integrated Fault Detection: Detects open-circuit conditions and other sensor faults for more reliable operation in industrial environments.
• Linear Output: Provides a linear 4-20 mA output that corresponds to the input sensor signal.
• Low Power Consumption: Low power draw, making it suitable for battery-operated applications.
• Output Scaling: The output can be scaled for various sensor ranges and types, such as temperature, pressure, and flow.

Additional Information:

• Packaging Details: REEL

Additional Information:

• Packaging Details: TUBE

The CD4028BM96 is a BCD (Binary-Coded Decimal) to Decimal Decoder IC from the CD4000 series of logic gates. It is used to decode a 4-bit BCD input into a 1-of-10 output, meaning it can drive one of ten outputs HIGH based on the binary value of the input.

• Type: BCD to Decimal Decoder
• Logic Family: CMOS
• Inputs: 4-bit BCD (A, B, C, D)
• Outputs: 10 (Q0 to Q9, active HIGH)
• Voltage Range: 3V to 15V (Standard operation at 5V, 10V, or 15V)
• Output Drive: Can drive LEDs, relays, or other loads
• Low Power Consumption: CMOS-based technology
• Pin Count: 16-pin SOIC (Small Outline Integrated Circuit)
• Operating Temperature Range: -55°C to 125°C
• Package Type: SOIC-16 (BM96 version)

• The IC takes a 4-bit BCD input and activates only one of the 10 outputs.
• If inputs A, B, C, and D form a binary number between 0000 (0) and 1001 (9), the corresponding output is HIGH.
• For invalid BCD values (1010-1111), all outputs remain LOW.
• The Enable pin (active LOW) must be LOW for normal operation. If HIGH, all outputs are LOW regardless of input.

• Digital Display Drivers (7-segment displays)
• LED Sequencing
• Address Decoding in Memory Circuits
• Industrial Control Systems
• Microcontroller Interfaces
• Keypad Decoders

Additional Information:

• Packaging Details: TAPE AND REEL

The Microchip MCP6004T-I/SL is a low-power, quad-channel operational amplifier (op-amp) designed for general-purpose analog applications. It's part of the MCP6004 series, known for its rail-to-rail input and output, making it versatile for single-supply systems.

• Number of Channels: 4 independent op-amps

• Gain Bandwidth Product (GBP): 1 MHz

• Slew Rate: 0.6 V/µs

• Input Offset Voltage (Vos): 4.5 mV

• Input Bias Current: 1 pA

• Common-Mode Rejection Ratio (CMRR): 60 dB

• Power Supply Rejection Ratio (PSRR): 86 dB

• Output Drive Capability: 23 mA per channel

• Supply Voltage Range: 1.8V to 6V

• Supply Current: 100 µA (typical)

• Operating Temperature Range: -40°C to +85°C

Additional Information:

• Packaging Details: TAPE AND REEL

To meet the various requirements of the customers, we are involved in offering a wide assortment of DS1307 N IC Chip.

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Enriched by our vast industrial experience in this business, we are involved in offering an enormous quality range of 74LS02 Integrated Circuit.

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: TUBE

Our company is highly esteemed in providing MM74HC04N Transistor.

We offer our clients an exclusive range of MCI4024 BCP Transistor.

Our company has achieved laurels in offering LM 350T Transistor.

Our company has gained name and fame in presenting 74LS08 Integrated Circuit.

Additional Information:

• Packaging Details: TUBE

Additional Information:

• Packaging Details: REEL

The PIC12F510-I/P is an 8-bit microcontroller from Microchip Technology, housed in an 8-pin PDIP (Plastic Dual In-line Package). It is designed for compact, low-power embedded applications requiring analog-to-digital conversion and efficient control.

• Program Memory: 1.5 KB Flash

• Data Memory: 38 bytes RAM

• Clock Speed: Up to 8 MHz

• Operating Voltage: 2.0V to 5.5V

• I/O Pins: 6

• Package Type: PDIP-8​

• Analog-to-Digital Converter (ADC): 8-bit resolution with 3 channels

• Comparator: 1 channel

• Timers: One 8-bit timer (TMR0)

• Low-Power Features: Power-on Reset (POR), Watchdog Timer (WDT), Sleep mode

• Code Protection: Yes

• In-Circuit Serial Programming™ (ICSP™): Supported​

Additional Information:

• Packaging Details: TUBE

PART NO: HCF4051BEY.
MAKE: ST MICROELECTRONICS
DES: Multiplexer Switch ICs 8-Ch Ana Mult/Demult - 16 PIN IC

 Wide supply range of 3V to 36V (B, BA versions) • Quiescent current: 300µA/ch (B, BA versions) • Unity-gain bandwidth of 1.2MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2mV input offset voltage maximum at 25°C (BA version) • 3mV input offset voltage maximum at 25°C (A, B versions) • Internal RF and EMI filter (B, BA versions)

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TUBE

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

The LM393B device are the next generation versions of the industry-standard LM393 and LM2903 comparator family. These next generation B-version comparators feature lower offset voltage, higher supply voltage capability, lower supply current, lower input bias current, lower propagation delay, and improved 2 kV ESD performance and input ruggedness through dedicated ESD clamps. The LM393B and LM2903B can drop-in replace the LM293, LM393 and LM2903, for both "A" and "V" grades. 

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TUBE

Our company holds immense experience in this domain and is involved in offering a wide assortment of ULN2003 AN Microcontroller.

Additional Information:

• Delivery Time: 2 DAYS
• Packaging Details: SPQ

Additional Information:

• Packaging Details: REEL

Additional Information:

• Packaging Details: TUBE