X
View Mobile Number 89% Response Rate

Product Range

+View All

Enamel Wire Stripper

Our company brings forth large array of high quality Enamel Wire Stripper, which can be availed by our clients at cost effective prices and we procure our offered products from trustworthy vendors of the industry, in order to ensure their superior quality and longer service life. These are highly valued among our clients for their efficient performance, durability and reliability. Clients can avail these products as per there specific requirement and at economical price range. 

Enamel Wire Stripper- Round Collet
Interested in this product?
Get Best Quote
Model Name/NumberEWS 05-50
Automation GradeSemi-Automatic
DesignStandard
Stripping Materialcopper wire
Blade TypeStripping insert
Strip Diameter0.5mm - 5mm
WeightAprox 10kg

ENAMEL WIRE STRIPPER (MODEL EWS 05-50)

The EWS 05-50 will strip many Film Insulations including Enamel, Varnish etc., for a range of wire sizes between 0.5 to 5.0mm

Using a high speed rotary stripping insert, which is precisely adjustable to match the diameter of the bare conductor, surface insulation is easily removed.

The insert is held in a special adjustable chuck assembly which, when locked in position, allows precise repetitive stripping without risk of damage to the conductor.

2 Conical Stripping Insert provided along with the Stripper suitable for different wire sizes. Insert 1 = 0.5 to 0.8MM ; Insert 2 = 0.8 to 1.5mm; Insert 3 = 1.5 to 3.0mm Can be provide according to the customer requirement)

 

SIMPLE SETUP & STRIPPING OPERATION

1. Loosen the Chuck Assembly with the two wrenches provided.

2. Place Stripping Insert into the chuck and hand tighten.

3. Place the work piece into the insert and tighten the Chuck Assembly with the wrenches provided so that the insert closes but the work piece can still be removed.

4. Remove the work piece and start the Machine.

5. Strip the wire by pushing into the Stripping Insert and remove to examine.

6. If insulation is not completely removed switch off the Machine, tighten Chuck Assembly and repeat stripping operation.

 

TECHNICAL DATA

 

Model : EWS 05-50

Wire Sizes : From 0.5mm to 5 mm 

Stripping length: 10 mm to 50mm

R P M : 3000

Voltage : 220 to 240

Weight : 8 kg

Warranty : 6 month

View Complete Details

Yes, I am interested!

Handheld Enamel Wire Stripper
Interested in this product?
Get Best Quote
Model Name/NumberTS0 316
Automation GradeSemi-Automatic
Power SourceElectric
DesignStandard
Stripping Materialcopper wire
Blade TypeFinger Collet
Speed Adjustment ModeStep less Speed Regulation

Hand–held enamel wire stripper(Model : TSO 316) is made up of electronic no-grade regulator, Phase series motor and stripping blade. With portable and durable micro point switch and spinning type carbon brush and it has the following prominent advantages: high speed, high efficiency, easily operating, stability, easy installation, low failure rate, high production efficiency and novel design, and etc.
which are known in the market for their excellence, high performance, longer service life and user friendly features. These are sourced from trustworthy manufacturers of the industry and are strictly checked by our expert professionals before supplying to meet the international quality standards.

Features:
  • Hand-held enameled wire strippers, easy move.
  • Adjust speed according to wire size, the thicker the higher.
  • Specifications:
  • Available Wire Size: 0.5–3mm Need not change blade for different wire size)

Specification
  • Wire Size: 0.5-3mm
  • Stripping Length: 5-50mm
  • Power Supply: 220V/25W
  • Revolving Speed: 0-10000r/min
  • Speed adjustment mode: Step less Speed regulation
  • Weight: 0.7kg

View Complete Details

Yes, I am interested!

  • Fine Wire Enamel Stripper
  • Fine Wire Enamel Stripper
Fine Wire Enamel Stripper
Interested in this product?
Get Best Quote

Fine Wire Enamel Stripper

Get Latest Price

Minimum Order Quantity: 1 Number

Product Brochure Watch Video

Model Name/NumberFEWS 003-03
Automation GradeSemi-Automatic
Power SourceElectric
DesignStandard
Automatic GradeSemi-Automatic, Automatic
Stripping Materialcopper wire
Blade Typefiber cone wheel
wire size28SWG 0.33mm Minimum 48SWG 0.030mm

The Model “FEWS 003 - 03 “ Fine Wire Stripper will strip film type insulation including Forever, ML, enamel, varnish, isonel, and more from fine wires. The conical fiberglass wheels rotate at high speed to generate frictional heat which softens the insulation on the wire. The “nap” of the brush wipes this insulation away. The machines features a strip length stop which allows for consistent strip lengths, a dust take off port for environmental safety, and close-up multiple wire stripping capability. The unit also cleans and polishes leads of small electronic components and removes oxidation and other contaminants from leads as small as 0.0012” (.03mmø) diameter.

We recommend use to determine which Trophy machine is best for your specific application.

 


TECHNICAL DATA:

  • Model Number: FEWS-003 to 03
  • Wire Sizes: Maximum: 28SWG (0.33mmø) Minimum: 48SWG (0.030mmø)
  • Strip Length: 0 to infinity
  • Close-Up Stripping: Within 1/8"-3/16" (3.2mm-4.76mm) depending on size of coil body
  • Component Lead Lengths: Infinite-will clean to within 1/8” (3.2mm) of component body
  • Power: 220V 50 Hz


Additional Information:

  • Item Code: 003-03
  • Production Capacity: high
  • Delivery Time: immediate
  • Packaging Details: Box

View Complete Details

Yes, I am interested!

Enamel Wire Stripper - Finger  Type
Interested in this product?
Get Best Quote
Model Name/NumberTCF 05-30
Automation GradeSemi-Automatic
DesignStandard
Stripping MaterialCopper wire
Blade TypeFinger Collet
wire size0.5mm - 3mm
WeightApprox 10kgs

We are a leading distributor and supplier of wide array of Enamel Wire Stripper - Finger Type, which are appreciated for its quality, durability and long service life and are mainly used for various industrial uses. Further, these are procured from the renowned manufacturers of the industry in order to ensure their high quality and flawless performance. It is available as per our clients’ requirement at economical price range.

The Finger Type Enamel Wire Stripper is an electrically driven stripping machine with Foot Pedal operation for varnished wires. It consists of a motor unit and a knife head. The knife head is equipped with 3 carbide blades. The blades are closed by rotation (centrifugal force).

The Finger Type Enamel Wire Stripper strips the wires from 0.5 to 3.0mm.

The speed is regulated via a controller and thus the pressing force of the blades is adjusted for every individual material thickness. The working piece had to be inserted between the non-operating blades – switch on the Finger Type Enamel Wire Stripper (using the red thumb bottom) then draw out the stripped wire.

 

TECHNICAL DATA:

  • Wire Sizes : From 0.5mm to 3.0mm ø (SWG 26 to 11)
  • Stripping length : up to 50 MM
  • R P M : 6000
  • Voltage : 220 to 240
  • Weight : 13kg
  • Warranty : 6 month


Additional Information:

  • Item Code: TCF-05-30

View Complete Details

Yes, I am interested!

Enamel Wire Stripper-Cylindrical Type
Interested in this product?
Get Best Quote

Enamel Wire Stripper-Cylindrical Type

Get Latest Price

Minimum Order Quantity: 1 Number

Model Name/NumberFEWS-CY-02-06
Automation GradeSemi-Automatic
Power SourceElectric
DesignStandard
Automatic GradeAutomatic, Semi-Automatic
Stripping Materialcopper wire
Blade Typecylindrical wheel
Warranty6 Months

FINE WIRE ENAMEL STRIPPER-Cylindrical Type

Model FEWS CY-02-06

The Fine Wire Enamel Stripper is designed for stripping miniature coils and fine magnet / enamel wire.

The enamelled wire is introduced from above (or from the front) between the rotary, conical glass fibre wheels, the enamel is then removed from the wire.

The design of the wheels allows a visible method for making close stripping easier. With a knurled thumb screw the distance of the conical wheels can be stopped to suit the respective wire size. In order to allow for stripping of different insulating enamel coatings, 2 types of wheels are available.

Stripping to within 1/8" of a component body are possible with no restriction on stripping length.

  • The Fine Enamel Wire Stripper strips all types of film insulation
  • Fast & Easy to set up
  • Wire Sizes from 0.2mm to 0.6mm (SWG 36 to 25)

 

TECHNICAL DATA: 

CYCLES PER SECOND

 

50 cycles per second

WEIGHT

:

8.0 Kgs

VOLTAGE

:

220 ~ 240v

WARRANTY

:

6 months



Additional Information:

  • Item Code: FEWS-003-03cylindrical
  • Production Capacity: high
  • Delivery Time: immediate
  • Packaging Details: box

View Complete Details

Yes, I am interested!

Enamel Wire Stripper-Flat Wire
Interested in this product?
Get Best Quote
Model Name/NumberFL1030
Automation GradeSemi-Automatic
Power SourceElectric
DesignStandard
Stripping MaterialFlat Wire
Blade TypeFlat Copper Wheel
MakeTrophy

ENAMEL WIRE STRIPPER

The BEWS will strip many film insulation including Enamel Varnish etc. for a flat and round wire thickness and length is adjustable

Using high speed rotary metal brush which is prissily adjustable to Mach the diameter of the bare conductor, surface insulation is easily removed

The Brush is held in a special adjustable knob assembly in that can adjust the thick ness of the wire

??

SIMPLE SETUP & STRIPPING OPERATION

A) Switch on the power supply

B) Set the length by using length adjuster or stopper

C) Adjust the thick ness of wire by using round know CW

Features

A fast and inexpensive method of wire stripping
To strip the wire, simply insert the end of the enamelled wire, turn by 90 degrees and then remove the stripped wire.

Wire range

0.1 - 8.0 mm
screw - adjustable aperture (hole size)

In-feed Length

1.7mm (how close the machine can strip from coil body)

Package Includes

Removal of enamel coating on copper wire using 0.1mm/0.2mm wire brushes

Application

Winding wire - enamel coating removal

Stripping

Single wire only, can be used on flat wire

Mounting

On rubber feet making storage simple

Power

AC 230 / 110 V +- 10%, 50 - 60hz ,370W

Dimensions

390 L * 180 W * 180 H (mm)

Net weight

25 kg

??

??

??



Additional Information:

  • Item Code: FWES05-80

View Complete Details

Yes, I am interested!
3.7/5★★★★★★★★★★

Reviewed by 45 Users

5 star23

4 star5

3 star6

2 star1

1 star10

User Satisfaction

Response62%

Quality100%

Delivery100%

Most Relevant Reviews

K

Kiran Parekh ★★★★★ ★★★★★

04-February-20

good

S

SATLINK INDUSTRIAL PRODUCT COMPANY ★★★★★ ★★★★★

05-January-20

Response

Quality

Delivery

Good

Get in touch with us

Reach Us

Trophy Tech IndiaNo. 63, 2 Sarakki Main Road, Above Mahalakshmi Granites, 1st Phase, J. P. Nagar, Bengaluru-560078, Karnataka, India

Umesh VS

View Mobile Number89% Call Response Rate

Send SMS
Send Email
Leave a Message, we will call you back!
Send your enquiry to this supplier
I agree to the terms and privacy policy

We Accept Online Payments

All Rights Reserved (Terms of Use)