Tuf Kote Automotive Private Limited

TufClad 9220 Sound Deadening Coating Sprayable

DESCRIPTION

• TufClad Sprayable Sound Damper - is a water based liquid plastic coating, which is formulated as an exceptional acoustical control material. It is used for dampening noise, vibration and improving the acoustical properties of
  undercarriages and sheet metal bodies of automobiles, and any other application where sound dampening is required.

• Applications

  Applied by Spray equipment or brush
  Mix required amount of thinner [water] to allow proper application. Surface to be treated should be clean, dry and free from rust or oil, Touch Dry - 30-60 minutes room temperature. Complete curing 24 Hours.

Additional Information:

• Item Code: 9220sdp
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 working days
• Packaging Details: 1 kg / 20 kgs

• Eliminates speaker panel distortion
• Contains four 250mm x 250mm sheets
• Used when mounting your speaker to a metal baffle like a car door or rear deck lid
• Stops vibration, rattles, and squeaks
• 2.69 Square feet total
• Easy self-adhesive application

Additional Information:

• Item Code: 91202pc
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 working day
• Packaging Details: Piece size - 250 mm x 250 mm Kit - 2 pieces

TufClad is a lightweight self-adhesive elastomeric laminate made of a mixture of special polymers and fillers with variable granulometry. It is a dampening material, particularly suitable for application on steel plates subject to vibrations.

Applications:

The TufClad Car Kit is a must for improving the overall sound quality in your vehicle by cutting out unwanted road noise. It's typical use would be on vehicles to reduce vibrations and rattles on car doors or boot lid, fenders, firewall area and specially in the bonnet areas for diesel vehicles..

The kit includes five sheets, size 500mm x 250 mm of TufClad Standard.

Installation:

Use a sharp object like scissors or a knife to cut the sheet to the wanted size and shape before removing the backing paper. Clean the area where the sheet is to be installed by removing dust, grease, moisture, and other foreign matter. Peel off the backing paper and stick directly on area to be deadened. [Wear cotton gloves if possible] Peeling from one side edge will give best results. Using a roller or cloth, press the sheet tightly into place, the roller will help eliminate unwanted air pockets. No heating is required.

Product Features:

• Eliminates panel distortion
• Quieter passenger cabin
• Stops vibration, rattles, and squeaks
• Contains five 500mm x 250mm sheets
• 6.72 Square feet total
• Easy self-adhesive application

Pack Size:Box of 25 Sheets

Additional Information:

• Item Code: 9120kit
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 working days
• Packaging Details: Set of 5 sheets - each sheet 250 mm x 500 mm Box of 25 sheets

• TufClad is a lightweight self-adhesive elastomeric laminate made of a mixture of special polymers and fillers with variable granulometry. It is a dampening material, particularly suitable for application on steel plates subject to vibrations.

  Applications

  The TufClad Speaker Kit is a must for improving the overall sound quality in your vehicle by cutting out unwanted road noise. It's typical use would be on vehicles to reduce vibrations and rattles on car door or boot lid where speakers commonly located.

  The kit includes four 250mm x 250 mm [10" x 10"] pieces of TufClad Std.

  Installation

  Use a sharp object like scissors or a knife to cut the sheet to the wanted size and shape before removing the backing paper. Clean the area where the sheet is to be installed by removing dust, grease, moisture, and other foreign matter. Peel off the backing paper and stick directly on area to be deadened. [Wear cotton gloves if possible] Peeling from one side edge will give best results. Using a roller or cloth, press the sheet tightly into place, the roller will help eliminate unwanted air pockets. No heating is required.

  Product Features

  • Eliminates speaker panel distortion
  • Contains four 250mm x 250mm sheets
  • Used when mounting your speaker to a metal baffle like a car door or rear deck lid
  • Stops vibration, rattles, and squeaks
  • 2.69 Square feet total
  • Easy self-adhesive application

Additional Information:

• Item Code: 91204pc
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 working days
• Packaging Details: Piece size - 250 mm x 250 mm Kit - 4 pieces

"FEEL” The Difference

1. One of the prime concerns of all car manufactures worldwide is to reduce vibrations and extraneous noises from entering into the vehicle.
2. Sheet Metal Vibration is one of the main sources of noise generation. This is due to driving on bad roads, Vehicle rigidity as well as sheet metal thickness used by the car manufacturer.
3. For solving this problem. Tuf Kote has introduced Sheet Metal Vibration Deadeners. These pads when stuck on the insides of the sheet metal, increase sheet metal rigidity, reduce vibrations and increase driving comfort

Additional Information:

• Item Code: Tufclad
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Packaging Details: This service is available at company's Mumbai Work Shop