X
View Mobile Number 90% Response Rate
Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

European Approvals

Providing you the best range of PED 97/23/EC, AD 2000 W0/ HP0, ISO 3834, CE Marking for European Market, CE Marking as per Construction, Welding Consumables, Welding Manufacturer For Railway Components and NDT - PED / EN473 with effective & timely delivery.

PED 97/23/EC, AD 2000 W0/ HP0, ISO 3834
Interested in this product?
Get Best Quote
License to trade in the European Market

TUV NORD is renowned for its high level of expertise in Pressure Equipment Directive – PED 97/23/EC inspections and certifications which enable you to comply with the legal requirements for CE marking of pressure equipment which are then accepted throughout the European community and many other countries.

1. PED 97/23/EC Annex.I, 4.3 / AD 2000 W0  Material Manufacturer Approval and AD 2000 HP0 / ISO 3834  Equipment / Welding Workshop Approval

The PED Pressure Equipment Directive was adopted by the European Parliament and the European Council in May 1997 and from 29 May 2002 has been obligatory throughout the European Union with penalties for non-compliance.

As per the requirements of European Union, the following approvals are mandatory for supplying any products covered under Pressure Equipments Directive PED 97/23 EC.
 
TUV INDIA (TUV NORD Group) provides expertise guidance & knowledge to all the customers with regular Inspection & Audits to the plant through PED Authorized Inspectors available all over India.

  • Approval of Material Manufacturers QMS under PED 97/23/EC Annex .I, 4.3 & AD 2000 W0:
    Products covered
    : basic materials like plates, forging, tubes, castings, etc used in construction of pressure equipment.
    Beneficial to:   Material Manufacturers for export of materials to EU or supply materials to Pressure Equipments manufacturers (of India or any country) for final products being supplied to EU
  • Approval of Equipment manufacturers QMS under AD 2000 HP0/ ISO 3834 :
    Products covered
    :  Pressure vessels/Tanks, Heat Exchangers, Reactors, Columns, Bullets etc. ISO 3834 also covers welding shops for structural / other applications.
    Beneficial to:   Equipment manufacturers, Fabricators who wish to export their products to European Countries/ Germany.

About AD 2000 Merkblatter
AD 2000 stands for “Arbeitsgemeinschaft Druckbehalter”, which translates to Working Group on Pressure Vessels. “Merkblatter” are “specification sheets”
AD 2000 Merkblatter, the German Code for pressure vessel design and manufacture, is prepared by a group of seven trade associations who together form the Arbeitsgemeinschaft Druckbehalter. TUV NORD as a member of VdTÜV, the head of the working group can certify Indian manufacturers in accordance with the AD 2000 regulations.

View Complete Details

Yes, I am interested!

CE Marking for European Market
Interested in this product?
Get Best Quote

CE Marking is a symbol of product safety. This is a product certification for certain products to be sold in European union.

E Marking as per Pressure Equipment Directive (PED 97/23/EC)

TUV INDIA engineers and auditors have years of valuable international experience in all aspects of pressure equipment, from manufacturing, design, inspection, welding, to quality assurance for both fixed and transportable pressure equipment.

TUV India has been conducting third party inspections and design validations on pressure equipment around the globe for many years. Our services are independent and confidential. We deliver fast, competent compliance solutions. Whether you are a designer, manufacturer, importer or assembler of pressure equipment, we can help you deliver pressure equipment to market more efficiently and cost-effectively.

The Pressure Equipment Directive (PED) is European Legislation aimed at removing the technical barriers to trade relating to the supply of pressure equipment throughout Europe. The PED is based on Essential Safety Requirements (ESRs) that govern design, manufacturing, inspection and testing. PED affects most equipment that will be placed on the market in the European Economic Area (EEA) designed for pressures above 0.5 bar g or 7.25 psi g.

PED covers all types of fixed equipment:

  • Pressure Vessels
  • Piping
  • Steam Generators
  • Pressure Accessories
  • Safety Accessories
  • Assemblies comprising two or more items listed above

The European directives for pressure equipment consists of:

  • Simple pressure vessels (SPVD) - 87/404/EC: Vessels for compressed air and nitrogen. For example, air compressors, pneumatic systems, braking systems etc.
  • Pressure equipment (PED) - 97/23/EC: Pressure vessels, heat exchanger, reactors, cryogenic vessels, water tube boilers, shell boilers, safety valves, valves, fire extinguishers, cylinders for breathing apparatus etc.

View Complete Details

Yes, I am interested!

CE Marking as per Construction
Interested in this product?
Get Best Quote

Construction products as per the CPD are to be regulated. The aim is to the removal of technical barriers to the free circulation of goods.

Construction Products Directive (CPD) – Directive 89/106/EEC

TUV INDIA offers a comprehensive suite of services for CPD 89/106/EEC requirements with our Notified Body Accreditations.

Upon demonstrating compliance with the relevant requirements, the product is allowed to carry the CE Mark.

The Construction Products Directive (CPD) is a set of regulations known as Directive 89/106/EEC, similar to other directives issued by the European Union (EU) and designed to make products arriving in any European Union country safe to use and install. The CPD directive has been in effect for several years and is beginning to take effect as more and more Product Standards are issued.

List of standards covered under our scope of approval

  • EN 10025-1 & 2  - Hot rolled products of structural steels
  • EN 15048-1 & 2 - Non-preloaded structural bolting assemblies
  • EN 10129-1 - Cold formed welded structural hollow sections of non-alloy and fine grain steels
  • EN 14399-1 to 7  - High-strength structural bolting assemblies for preloading.
  • EN 10088-4 – Stainless Steels – plates and coils
  • EN 10088-5 – Stainless Steels – bars, wire, sections and bright products 
  • EN 10340 – Steel castings for constructions
  • EN 10343 – Quenched and tempered steels for constructions
  • EN 10255 – Tubes from unalloyed steels suitable for welding and threading
  • EN 14889-1, -2 – Fibre for concrete (steel fibre and polymer fibre)
  • EN 13479 - Welding consumables  (wires / electrodes)

And other EN standards referred in below link.

View Complete Details

Yes, I am interested!

Welding Consumables
Interested in this product?
Get Best Quote

Welding Consumables

Get Latest Price

Welding consumables are classified in accordance with basically the mechanical and/or chemical´requirements of the standards, excluding such requirements as size, length, marking and identification manners.

Manufacturing additional materials for welding according to VdTÜV 1153 and DB regulations:

TUV India with the technical support by TUV NORD, Germany has approved various shops in India according to VdTUV 1153 & other DB regulations viz. EN12074, EN13749, EN 14532 etc.
All Certifications of welding consumables are valid for three years subject to annual surveillance audits by TUV INDIA and maintenance of quality systems & testing results by you. Re-certification will be done by TUV NORD Systems GmbH & Co. KG., Germany

Here is some more general information to the specifications on which the approval is based :

  • EN 13479 – “ Factory Production Control” for CE marking as per CPD.
  • EN 14532-1; Welding Consumables – Test methods and quality requirements.
  • The test pieces for the all-weld-metal samples will be in accordance with EN 1597-1  with a thickness of around 20 mm (all sizes given in the EN-standard).
  • All butt welds will be prepared on test pieces with around 20 mm thickness and all other dimensions acc. to EN 14532-1 chapter 6.2.2.
  • All welding parameters are to be recorded.
  • All EN standards referenced in EN 14532-1 are applicable for the approval.

View Complete Details

Yes, I am interested!

Welding Manufacturer For Railway Components
Interested in this product?
Get Best Quote
An Approval for Welding of Railway Vehicles and Components

As from 01.04.2008 the standards DIN EN 15085-1 to -5 were introduced by the German Railway Authorities (EBA) as acknowledged technical rules within the responsibility of the EBA.

Approval for Welding on rail vehicles & vehicle components according to DIN EN 15085-2

“Welding on rail vehicles requires particular specialist expertise”

Companies that would like to carry out welding work on rail vehicles and vehicle components, must have their suitability verified according to DIN EN 15085-2 (in the past, according to DIN 6700-2). The certificate is considered verified if the certificate has been issued by a notified body. This certificate verifying welding specialist expertise is particularly important for welding companies, since the welded components on rail vehicles and vehicle components that are manufactured or maintained by welding companies without the certificate required for the component are not considered standard compliant.

Welding on rail vehicles is not for everyone. In fact, welding on an rail vehicles and vehicle components may only be carried out by experts who have a corresponding certificate verifying their professional competence. This certificate is based on the directive governing the procedure for obtaining the certificate to weld rail vehicles and vehicle components. The directive ensures the uniform procedure. It is binding for notified bodies and manufacturers.

The German federal railway agency EBA is the responsible supervisory authorities for federal railways.

If you would like to have your welding specialist expertise in the railway sector recognised, simply contact us: TÜV NORD Systems is a recognized manufacturer certification centre for preparing certificates designed to verify the suitability for welding rail vehicles and vehicle components according to DIN EN 15085-2 of the EBA.
Shops intending to carry out welding work in new construction including production welding or repair must have proven their suitability according to DIN EN 15085 part 2. The evidence is considered given if the certificate has been issued by a manufacturer certification body. Manufacturer certification bodies are recognised by the national safety agency (German Railway Authority). 
Certification acc. to DIN EN ISO 3834-2 or-3 does not replace certification acc. to DIN EN 15085-2.

View Complete Details

Yes, I am interested!

NDT - PED / EN473
Interested in this product?
Get Best Quote

NDT - PED / EN473

Get Latest Price

A wide group of analysis techniques

NDT does not permanently alter the article being inspected, it is a highly-valuable technique that can save both money and time in product evaluation, troubleshooting, and research.

NDT personnel Qualification according to PED 97/23/EC & EN473

TUV INDIA is authorized to conduct exams for NDT qualification according to PED 97/23/EC & EN473 in  Level I, II & III for UT, RT, PT, MT, VT, ET Methods.

  • We have certified over 700 nos of NDE candidates as per EN473 & PED  for different customers viz. M/s. Godrej & Boyce Mfg. Co. Ltd., M/s. Larsen & Toubro Ltd., M/s. ALSTOM, M/s. INOX LTD., M/s.Transparent Energy Systems Ltd., M/s. Fouress Engineering Ltd, M/s. SEIMENS,.

M/s. Sanmar etc at different locations in India.

The exam can be carried out at the manufacturers place or open house exams are being carried out by TUV India with fulfilling minimum number of candidates requirement.

The certificate will be issued by TUV NORD SYSTEMS GMBH & CO. KG ( Idnt No. 0045)

EN473: 2008 requirements:

  • The candidate shall provide documentary evidence that he has satisfactorily completed a course of training … which is in accordance with the syllabus content of CEN ISO/TR 25107 .
  • It is recommended that the NDT personnel training organization follow the guidelines given in CEN ISO/TR 25108

The scope of examination & certification will be strictly as per EN473: 2008, CEN ISO/TR 25107, CEN ISO/TR 25108 & TUV NORD Accreditation requirements.

View Complete Details

Yes, I am interested!

Tpi Shop And Site Inspection
Interested in this product?
Get Best Quote
140 years of German safety and innovation excellence

TUV India's Third Party Inspection and Verification Services team provides our customers quality and dedication.

Third party inspection services

TUV India’s Industrial Services is true global provider of Technical Inspection, Verification, Testing and Conformity Assessment for Industrial Markets.  The core values of complete independence, transparency and integrity guide us in our mission to deliver first-class services on a constant high quality level to customers around the world.
Our Teams of Engineers ensure that the quality and performance of products or installations meet applicable requirements, whether they are regulatory, voluntary or client specific.  We help to improve the integrity, quality and efficiency of equipment, assure safe and health working conditions for employees and minimize the environmental impact of industrial activities.

Our Services are divided into:

  • In-Process Inspection
  • Statutory and Voluntary Inspections
  • Material Testing and Non-Destructive Testing
  • Product Certification

TUV Industrial Services offers a combination of specialized solutions and traditional services.  During all stages, from Design through Procurement, Construction and Commissioning into Operation, TUV India’s offers a comprehensive package of  integrated services.

TUV India expertise extends to all major Industrial Markets.  Special focused markets include:

Oil & Gas Industry:   TUV India global experience in the Oil and Gas Industries include Process Plants and Refineries, Chemical Plants, Offshore Structure, NGL, LPG and LNG Plants, Gas gathering, Storage and Distribution System as well as Oil and Gas Transmission Pipelines.

Our Services Overview:

  • Design Appraisal and Verification
  • Certification according to AD-2000
  • Document Verification
  • Electrical Equipment Verification / Inspection
  • Electrical Installations, Inspection & Verification
  • ASME (American Society of   Mechanical Engineers) Inspection
  • ASME Authorized Inspection Agency
  • ASME Certification and Stamping
  • Certification according to API
  • ATEX Notified Body Services
  • Authorized Inspection Agency for Indian Boiler Regulation
  • Authorized Inspection Agency for Petroleum “PESO”
  • CE Marking.

View Complete Details

Yes, I am interested!

Indian Boiler Regulations (Ibr) - Inspection Authority
Interested in this product?
Get Best Quote
140 years of German safety and innovation excellence

With great pleasure TUV India brings to clients in India the service of “IBR Inspection” with the same dedication to the basic values of  TUV NORD GROUP of Independence, Technical Integrity, Value-addition and Timeliness.

View Complete Details

Yes, I am interested!
2.0/5★★★★★★★★★★

Reviewed by 2 Users

5 star0

4 star0

3 star1

2 star0

1 star1

G

Govind Kumar ★★★★★ ★★★★★

23-March-20

H

HARINDRANATH OOTKUR T.S. ★★★★★ ★★★★★

24-August-19

Leave a Message, we will call you back!
Send your enquiry to this supplier
I agree to the terms and privacy policy
Tell us what you need, and we’ll help you get quotes
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Tell us what you need, and we’ll help you get quotes
I agree to the terms and privacy policy