Mode of Report	Hard Copy
Type of Industry	For Manufacturing
Type of Certification	New Certification
Services offered	Audit
Training Courses (if applicable)	Internal Auditor Training
Document verification Mode	Online
Target Location	Pan India
Certifications Provided	iso29181

ISO/IEC TR 29181-4:2013 describes the problem statements of current network and the requirements for Future Network in the mobility perspective. It mainly specifies

• problems of the current network in mobile environment, and
• requirements for mobility support in Future Network

Mode of Report	Soft Copy
Type of Industry	For Manufacturing
Type of Certification	New Certification
Services offered	Training
Training Courses (if applicable)	Lead Auditor Training
Document verification Mode	Offline
Target Location	Pan India
Certifications Provided	iso17987
Response Time	imidate
Service Duration	imidate

ISO 17987-2:2016 specifies a transport protocol and network layer services tailored to meet the requirements of LIN‑based vehicle network systems on local interconnect networks. The protocol specifies an unconfirmed communication.

The LIN protocol supports the standardized service primitive interface as specified in ISO 14229‑2.

ISO 17987-2:2016 provides the transport protocol and network layer services to support different application layer implementations like

- normal communication messages, and

- diagnostic communication messages.

Mode of Report	Soft Copy
Type of Certification	Renewal
Services offered	Audit
Training Courses (if applicable)	Lead Auditor Training
Document verification Mode	Online
Target Location	Pan India
Certifications Provided	ISO 9001
Response Time	imidate
Service Duration	imidate

ISO 16239:2013 specifies the material, metric series nominal diameters, diameter tolerances, and designation for screw thread measuring wires.

ISO 16239:2013 is applicable to measure the pitch diameters of ISO general purpose metric screw threads (M), Unified screw threads (UN), Whitworth pipe threads (G, R), and ISO metric trapezoidal screw threads (Tr) with standard pitches. These wires are intended for use on screw threads with a small lead angle, less than 5°, and mainly used to calibrate the pitch diameters of thread plug gauges.

 

Mode of Report	Soft Copy
Type of Industry	For Manufacturing
Type of Certification	New Certification
Services offered	Audit
Training Courses (if applicable)	Internal Auditor Training
Document verification Mode	Online
Target Location	Pan India
Certifications Provided	iso17972
Response Time	imidate
Service Duration	imidate

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization

Mode of Report	Hard Copy
Type of Industry	For Manufacturing
Type of Certification	New Certification
Services offered	Audit
Training Courses (if applicable)	Internal Auditor Training
Document verification Mode	Online
Target Location	Pan India
Certifications Provided	ISO 9001
Response Time	imidate
Service Duration	imidate

ISO/TS 17948:2014 defines the core set of TCM literature metadata, describes the principles and methods of TCM metadata, and specifies the formal description of TCM metadata. It applies to the storage, processing, recording, maintenance and exchange of TCM literature. It covers areas of identification, content, distribution, constraint, quality, maintenance, and relationship of traditional Chinese medicine literature.

Additional Information:

• Delivery Time: one week

Mode of Report	Soft Copy
Type of Industry	For Manufacturing
Type of Certification	New Certification
Services offered	Audit
Training Courses (if applicable)	Internal Auditor Training
Document verification Mode	Offline
Target Location	Pan India
Certifications Provided	iso 16449

ISO/IEC 16449 specifies the mechanical, physical and optical characteristics of a 80 mm, read-only optical disk to enable the interchange of such disks. It specifies the quality of the recorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks.

Mode of Report	Soft Copy
Type of Industry	For Manufacturing
Type of Certification	New Certification
Services offered	Audit
Training Courses (if applicable)	Internal Auditor Training
Document verification Mode	Online
Target Location	Pan India
Certifications Provided	iso17068
Response Time	imidate
Service Duration	imidate

ISO/TR 17068:2012 details the authorized custody services of a Trusted Third Party Repository (TTPR) in order to ensure provable integrity and authenticity of the clients' digital records and serve as a source of reliable evidence

Additional Information:

• Delivery Time: one week

Mode of Report	Soft Copy
Type of Industry	For Manufacturing
Type of Certification	New Certification
Services offered	Audit
Training Courses (if applicable)	Internal Auditor Training
Document verification Mode	Online
Target Location	Pan India
Certifications Provided	iso16559
Response Time	imidate
Service Duration	imidate

ISO 16559:2014 determines the terminology and definitions for solid biofuels. According to the scope of the ISO/TC 238 this standard only includes raw and processed material originating from

• forestry and arboriculture,
• agriculture and horticulture,
• aquaculture

Mode of Report	Hard Copy
Type of Industry	For Manufacturing
Type of Certification	New Certification
Services offered	Audit
Training Courses (if applicable)	Internal Auditor Training
Document verification Mode	Online
Target Location	Pan India
Certifications Provided	ISO 45001

ISO/TR 16310:2014 intends to specify the requirements and needs for supplying and managing standardized symbolic descriptions of objects that need to be specified in the construction process

Mode of Report	Hard Copy
Type of Industry	For Manufacturing
Type of Certification	New Certification
Services offered	Audit
Training Courses (if applicable)	Lead Auditor Training
Document verification Mode	Offline
Target Location	Pan India
Certifications Provided	iso 29181

ISO/IEC TR 29181-4:2013 describes the problem statements of current network and the requirements for Future Network in the mobility perspective. It mainly specifies

• problems of the current network in mobile environment, and
• requirements for mobility support in Future Network.

In addition, ISO/IEC TR 29181-4:2013 gives information on

• existing mobility control schemes in the current network,
• examples of high-level mobility control architecture for Future Network,
• distributed mobility control in the Proxy Mobile IPv6 networks, and
• additional considerations for Future Network mobility.

Type of Industry	For Food
Type of Certification	New Certification
Services offered	Audit
Training Courses (if applicable)	Internal Auditor Training
Document verification Mode	Online
Target Location	Pan India

ISO 17987-2:2016 specifies a transport protocol and network layer services tailored to meet the requirements of LIN‑based vehicle network systems on local interconnect networks. The protocol specifies an unconfirmed communication.

The LIN protocol supports the standardized service primitive interface as specified in ISO 14229‑2.

ISO 17987-2:2016 provides the transport protocol and network layer services to support different application layer implementations like

- normal communication messages, and

- diagnostic communication messages.

Service Provider	yes
Product name	iso
Response Time	imidate
Service Duration	imidate

ISO 16840-2:2018 specifies apparatus, test methods and disclosure requirements for wheelchair seat cushions intended to maintain tissue integrity and prevent tissue trauma. Test conditions simulate a symmetric anatomy and posture and do not represent cushion performance for specific individual users. Loads are intended to represent those seen under the pelvis of a 50th percentile wheelchair user and are not intended to assess the weight capacity of the cushion or to characterize the cushion under bariatric loads. It is possible that not all test methods apply to existing and future cushion technologies. It does not include test methods or requirements for determining the fire resistance of cushions.

Additional Information:

• Delivery Time: one week

Service Provider	yes
Product name	iso
Response Time	imidate
Service Duration	imidate

ISO 16059:2007 defines the elements of syntax, including the structure and associated content, for the purpose of coded data exchange and the need for harmonizing existing and future dentistry codification documents

Service Provider	yes
Product name	iso
Response Time	imidate
Service Duration	imidate

ISO 16061:2015 specifies general requirements for instruments to be used in association with non-active surgical implants. These requirements apply to instruments when they are manufactured and when they are resupplied after refurbishment.

This International Standard also applies to instruments which may be connected to power-driven systems, but does not apply to the power-driven systems themselves.

Additional Information:

• Delivery Time: one week

Service Provider	yes
Product name	iso
Response Time	imidate
Service Duration	imidate

ISO 16707:2016 specifies a procedure for the evaluation and determination of the capacity of a marine evacuation system as required by the International Maritime Organization Life-Saving Appliance Code (LSA Code) and as an alternative to the procedure specified in Resolution MSC.81(70) part 1/12.6.1

Additional Information:

• Delivery Time: one time

Service Provider	yes
Product name	iso
Response Time	imidate
Service Duration	imidate

The PAS 2060 standard was published by the British Standards Institution in 2010 and updated in 2014. It enables organisations to demonstrate that their carbon neutrality claims are credible and verified in order to increase customer confidence

Additional Information:

• Delivery Time: one week

Service Provider	yes
Product name	iso
Response Time	imidate
Service Duration	imidate

ISO/IEC 17000:2004 specifies general terms and definitions relating to conformity assessment, including the accreditation of conformity assessment bodies, and to the use of conformity assessment to facilitate trade. A description of the functional approach to conformity assessment is included as a further aid to understanding among users of conformity assessment, conformity assessment bodies and their accreditation bodies, in both voluntary and regulatory environments.

Additional Information:

• Delivery Time: one week

Service Provider	yes
Product name	iso
Response Time	imidate
Service Duration	imidate

ISO 22320:2018, Security and resilience - Emergency management - Guidelines for incident management, is an international standard published by International Organization for Standardization that provide guidelines to be used for organizations that helps to mitigate threats and deal with incidents to ensure continuity of basic function of society (for example water and food supplies, health, rescue services, fuel delivery, and electricity)

Additional Information:

• Delivery Time: one week

Service Provider	yes
Product name	iso
Response Time	imidate
Service Duration	imidate

ISO - ISO 29001:2020 - Petroleum, petrochemical and natural gas industries — Sector-specific quality management systems — Requirements for product and service supply organizations.

Certifications Provided

iso17998

ISO/IEC 17998:2012 describes a framework that provides context and definitions to enable organizations to understand and deploy service-oriented architecture (SOA) governance.

ISO/IEC 17998:2012 defines:

• SOA Governance, including its relationship between Business, IT, and EA governance; this assists organizations in understanding the impact that the introduction of SOA into an organization has on governance;
• an SOA Governance Reference Model (SGRM) and its constituent parts, which assists organizations in specifying their appropriate governance regimes; and capturing best practice as a basis for a common approach;
• the SOA Governance Vitality Method (SGVM) which assists organizations in customizing the SGRM and realizing their SOA Governance Regimen

Industry To Cater

Insurance

ISO 16016:2016 specifies the protection notices which serve to prevent the improper use of documents and products whose usage is restricted.

With the benefit of a uniform text, protection notices draw attention to the existence of an industrial property right or copyright. Furthermore, they clearly show that the owner of the right claims legal protection to the fullest extent and, in addition to this, they restrict the utilization of the documents or products concerned

Additional Information:

• Delivery Time: one week

ISO 16059:2007 defines the elements of syntax, including the structure and associated content, for the purpose of coded data exchange and the need for harmonizing existing and future dentistry codification documents