Unicon Instruments

ANALOG BREAD BOARD TRAINER

Specification: Trainer  comprises of Power supplies inside the trainer

·        Power supplies on boards 0-50V, 250 mA and 0-30V,250mA Variable

·        15V/150mA and 5V/150mA Fixed Supplies provided on board.

·        4 Nos of Variable resistor provided on the board.

·        One 20 Pin Vero board on mounted on the board.

·        One Bread Board mounted on board.

·        Ac power supply 15-0-15V for rectifier applications

Various components on the trainer set

·        3 Pairs of connected 2mm sockets

·        4 Rectifier diodes

·        1 OA79 germanium diode

·        3 different values of Zener

·        N different values resistances

·        N  different values capacitors

·        Inductors 1mh, 10mh

·        Thyristor Bank

·        SL100 and SK100 pair

·        BC547 1nos.

·        1 LDR

·        1 Thermistor

·        2 LED’s

·        1 Relay 12V

·        2 Nos of Digital Voltmeter and Ammeter

·        One Speaker 8E 1/4W

·        1 Audio Transformer

Additional Information:

• Item Code: UNICON-D207

OPERATIONAL AMPLIFIER TRAINER

Technical Specification:

• The Instrument comprises of the Following built in Parts:- .
• Three continuously variable DC regulated power supplies of 0-3V, 0-5V and 0-12V Dc,
• Two Controls Switches mounted on the panel or a Digital panel voltmeter in place of switches.
• One fixed voltage DC Regulated power supplies  15V is on Board for internal op-amp biasing.
• One Variable Resistor (Potentiometer) having 10K value is mounted on the board.
• N number of Resistances and Capacitors are on board for the required operations to be performed.
• 4 Diode 1N4007, 2 numbers of 1N4148, 2 LED and 2 numbers of Zener Diode having value of 3.3V and 5.1V are mounted on the board.
• Two numbers of 741 Operational Amplifiers are mounted on the board.
• Operated on 230V, 50Hz power supply  10%

Packing list

• Instruction manual
• Power supply mains 3 pin cord
• Patch cords 

Additional Information:

• Item Code: UNICON-D216

OPERATIONAL AMPLIFIER TRAINER

     The Instrument comprises of the Following built in Parts:- .

• One 20V Digital Meter on board for voltage measurement.
• Three continuously variable DC regulated power supplies of 0-3V, 0-5V and 0-12V Dc,
• Two Controls Switches mounted on the panel or a Digital panel voltmeter in place of switches.
• One fixed voltage DC Regulated power supplies  15V is on Board for internal op-amp biasing.
• One Variable Resistor (Potentiometer) having 10K value is mounted on the board.
• N number of Resistances and Capacitors are on board for the required operations to be performed.
• 4 Diode 1N4007, 2 numbers of 1N4148, 2 LED and 2 numbers of Zener Diode having value of 3.3V and 5.1V are mounted on the board.
• Two numbers of 741 Operational Amplifiers are mounted on the board.
• Operated on 230V, 50Hz power supply  10%

 Packing list 

• Instruction manual
• Power supply mains 3 pin cord
• Patch cords 

Additional Information:

• Item Code: UNICON-D214

Additional Information:

• Item Code: UNICON-D211

ELECTRICITY LAB TRAINER

TRAINER SPECIFICATION:

1.     One number of ac voltmeter: 15v

2.     one number of dc voltmeter : 30v

3.     One number of galvanometer: ± 600ua

4.     One number of dc ampere meter: 0.5amp.

5.     One number of dc ampere meter: 5a

6.     Power supplies: power supply: 3, 6, and 12v ac/dc at 3.5a, power supply: 30vac at 1a, power supply: 15vdc at 100ma.

7.     One number of spdt switch.

8.     One number of dpdt switch.

9.     One number of push switch.

10. Two number of logic switche.

11. One number of relay 12vdc.

12. One number of buzzer/continuity tester.

13. One number of transformer input 12-0-12 v and output 6-0-6 v.

14. Three number of bulb (6 v, 0.3a).

15. Resistance 1e2/1w, 5e/5w, 50e/5w, 100e/5w, 220e/2w, 470e/2w, 1k/1w, 100k/1w.

16. Two number of capacitance 1000mfd/50v.

17. Two number of diode in4007.

18. One number of led (5mm).

19. One number of potentiometer (10k).

20. One number of breadboard (840 tie points).

21. One number of fuse holder (open type).

22. Electromagnetic induction&transformer.

23. Main supply 230vac, 50 hz.

ACCESSORIES:

1.      Twelve numbers of patch cords/ connecting leads.

2.      Three numbers of magnets (two number of bar type, one number of horseshoe (u) type).

3.      One number of coil (100 turns) and 200 turns

4.      Glass Fuses - 10 nos. 0.5a

5.      Compass - 1 no.

6.      Core - 1 set of e& i with bolt

7.      IC - And (IC 7408), Or (IC 7432), Not (7404) and Ex-or gate (ic7486)

Optional accessories: 1. MULTIMETER - 1 NO.

Additional Information:

• Item Code: UNICON-D208

DISCRETE COMPONENT TRAINER

Specification: Trainer  comprises of Power supplies inside the trainer

·        Power supplies on boards 0-50V, 250 mA and 0-30V,250mA Variable

·        15V/150mA and 5V/150mA Fixed Supplies provided on board.

·        4 Nos of Variable resistor provided on the board.

·        One 20 Pin Vero board on mounted on the board.

·        Ac power supply 15-0-15V for rectifier applications

Various components on the trainer set

·        3 Pairs of connected 2mm sockets

·        4 Rectifier diodes

·        1 OA79 germanium diode

·        3 different values of Zener

·        N different values resistances

·        N  different values capacitors

·        Inductors 1mh, 10mh

·        Thyristor Bank

·        SL100 and SK100 pair

·        BC547 1nos.

·        1 LDR

·        1 Thermistor

·        2 LED’s

·        1 Relay 12V

·        2 Nos of Digital Voltmeter and Ammeter

·        One Speaker 8E 1/4W

·        1 Audio Transformer

Additional Information:

• Item Code: UNICON-D206

FET CHARACTERISTICS TRAINER

OBJECTIVE:  To plot Static & Transfer Characteristics.

 FEATURES:

'UNICON' Instrument comprises of Two DC IC Regulated Power Supplies 0-3VDC/150mA & 0- 15VDC/150mA.

Three MR65 Square/Digital meters for voltage & current measurement.

One FET BFW10 mounted behind the panel.

Instrument Fitted in Highly Shockproof Plastics Box.

Instrument Dimensions: 12’’x8’’

ACCESSORIES:

Sufficient no of 4mm Patch Cords for Interconnection

Instruction Manual for Student Workbook.

Power Cords 230v, 50Hz

Additional Information:

• Item Code: UNICON-D221

DIAC CHARACTERISTICS TRAINER

FEATURES:

·         'UNICON' Instrument comprises of Two DC IC Regulated Power Supplies 0-50V/150mA.

·         Two MR65 Square/Digital/Round meters for voltage & current measurement.

·         One DIAC DB3 mounted behind the panel.

·         Instrument Fitted in Highly Shockproof Plastics Box.

·         Instrument Dimensions: 10’’x8’’

ACCESSORIES:

·         Sufficient no of 4mm Patch Cords for Interconnection

·         Instruction Manual for Student Workbook.

·         Power Cords 230v, 50Hz 

Additional Information:

• Item Code: UNICON-D220

ADJUSTABLE VOLTAGE REGULATOR TRAINER

FEATURES :

• 'UNICON' Instrument comprises of AC Power Supply 15-0-15
• Two Analog/Digital Meters to measure Input & Output Voltage and Current.
• Two type of regulators LM 317 and LM337.
• Load Resistances selectable using band switch.
• All important connections brought out on 4mm Sockets.
• Instrument Fitted in Highly Shockproof Plastics Box.
• Instrument Size: 12’’x8’’ 

ACCESSORIES:

• Sufficient no of 4mm Patch Cords for Interconnection
• Instruction Manual for Student Workbook.
• Power Cords 230v, 50Hz 

Additional Information:

• Item Code: UNICON-D219

ABCD PARAMETERS OF TWO PORT NETWORK TRAINER

FEATURES:

• Instrument comprises of  DC IC Regulated Power Supplies 0-20V/150mA.
• On Board AC Supply 15V
• Two MR65 Square / Digital / Round meters for voltage & current measurement.
• T and PIE Network provided on the board.
• Instrument Fitted in Highly Shockproof Plastics Box.
• Instrument Dimensions: 12’’x8’’

      ACCESSORIES:

•      Sufficient no of 4mm Patch Cords for Interconnection
•      Instruction Manual for Student Workbook.
•      Power Cords 230v, 50Hz 

Additional Information:

• Item Code: UNICON-D218

555 TIMER TRAINER

Specifications:

·         inbuilt  DC Power Supply 12VDC at 150mA

·         Different Circuit diagram is printed on board.

·         Components mounted on the front panel.

Features

·         Trainer operated on 230V, 50 Hz   10%

·         Supplied with instruction manual

·         Supplied with sufficient nos. of patch cords

·         Supplied with Computer Lead

Dimensions of the Trainer will be 10’’x8’’ with Plastic Box Highly shock proof 

Additional Information:

• Item Code: UNICON-D217

ADVANCED OPERATIONAL AMPLIFIER TRAINER 

Technical Specification:

• The Instrument comprises of the Following built in Parts:-
• Two continuously variable DC regulated power supplies of  1.5V-10V Dc,
• Two Controls Switches mounted on the panel or a Digital panel voltmeter in place of switches.
• 2 fixed voltage DC Regulated power supplies  15V is on Board for internal op-amp biasing.
• One fixed voltage DC Regulated power supplies  12V is on Board.
• One fixed voltage DC Regulated power supplies 12V and 5V is on Board.
• Six Numbers Variable Resistor (Potentiometer) having different values are mounted on the board.
• One Bread Board is mounted on the Panel Board.
• One 16 Pins ZIF Socket is mounted on the panel.
• N number of Resistances and Capacitors are on board for the required operations to be performed.
• 4 Diode 1N4007, 2 LED and 1 number of Zener Diode having value of 6.2V and 5.1V are mounted on the board.
• Two numbers of 741 Operational Amplifiers are mounted on the board.
• One NE555 IC is mounted on the panel.
• One LM331 IC is mounted on the board.

·         Two Triggering Pulsar are mounted on the Panel.

• NPN Transistor and IRF540 Mosfet are mounted on the panel.
• Operated on 230V, 50Hz power supply  10%

Packing list

• Instruction manual
• Power supply mains 3 pin cord
• Patch cords 

Additional Information:

• Item Code: UNICON-D215

POWER ELECTRONICS TRAINER

TECHNICAL SPECIFICATIONS 

DC Power Supply on Board:

: ± 12V at 150mA

: 0-15V at 150Ma

: 0-30V at 150mA

AC Power Supply on Board : 15V - 0V - 15V at 250mA

UJT Triggering Circuit using SCR (2 Channel) on Board

R, RC Firing Circuit

Power Devices :

 MOSFET-IRF540

UJT-2N2646

DIAC-DB3

FET BS170

TRIAC-BT136

SCR-TYN604

on board.

Circuit Components On Board: Capacitor 2 Nos.

Resistance on Board  22E/5W, 100E/2W, 220E/2W, 10K.

Potentiometer10K(1Nos.)

Power Requirements: 220V ±10%, 50Hz

Additional Information:

• Item Code: UNICON-D213

Additional Information:

• Item Code: UNICON-D212

LINEAR IC TRAINER

Which perform (Op-AMP as Adder, Subtractor, Differentiator, Integrator, Amplifier, Voltage Follower, Comparator, Astable and Mono Stable, Bistable Multivibrator, PLL, 555 TIMER) - The board consists of the following built-in parts: 01. ±15V D.C. at 50mA, IC Regulated Power Supply. 02. Three 0-2V D.C at 100mA, continuously variable regulated Power Supplies. 03. OP-AMP IC741. 04. Two SPST switches and adequate no. of other electronic components. 05. Mains ON/OFF switch, Fuse and Jewel light. * The unit is operative on 230V ±10% at 50Hz A.C. Mains.

SPECIFICATIOn

·          PLL 565 circuits as FM demodulators, to finds its PLL characteristics.

·          NE 566 a function generator to study how the square and triangular waveform can be generated with small circuits.

·          Opto coupler MCT2E characteristics

·          Op-amp comparator circuits using LM324, LM339

Additional Information:

• Item Code: UNICON-D210

ELECTRICITY TRAINER

TRAINER SPECIFICATION:

1.        Three number of bulb (6v, 0.3a).

2.        One number of dpdt switch.

3.        One number of continuity tester.

4.        One number of 12vdc/250vac relay.

5.        One number of galvanometer (30-0-30), 20ua per division.

6.        Three number of potentiometers (25 ohm, 1k, 10k) 1w each.

7.        One number of bread board (850 pins).

8.        On board power supplies 12vdc and 5vdc (200ma each).

9.        On board ac power supply 6vac, 1a.

ACCESSORIES:

1.        1 number of electromagnetic core (u-i type) with main supply 230vac, 50hz and two coils (6vac and 12vac).

2.        1 number of electromagnetic core (e-i type) with main supply 230v, 50hz

and six coils having number of turns and current (200 (swg: 21), 1a) (one number), (400 (swg: 23), 0.5a) (two number), (800 (swg: 27), 0.25a)(one number), (1600 (swg: 31), 0.125a)(1), (3200 (swg: 36), 0.05a)(1).

3.        Accessories component box (capacitor: 40, transistor: 02, diodes: 02, mains lead: 01, magnetic compass: 01, bar magnet: 01, multimeter: 01, screw driver: 01, connection patch cords: 25)

Additional Information:

• Item Code: UNICON-D209