Unique Solutions

Unitex Silicone Fiberglass Sleeve made of from high quality texturized yarns weaved into sleeve then coating high quality Silicone Rubber at surface. Flame retardant, heat insulation, thermal insulation, anti-electricity, soft and other properties. It is widely used in high temperature areas such as steel, smelting, shipping and chemical and other industries, heating cables, fluid lines, rolling mill cables, tubing, sawing the surrounding cables, generator sets, electrical voltage equipment, large buildings, hydraulic systems, automotive wiring harness and exhaust pipe and so on. It can also be used as a special material for aerospace, cutting-edge technology and military technology sectors, as well as various sectors of the national economy such as metal smelting, construction, electrical and electronics, textile, automotive, machinery, chemical light industry, etc.

1.High temperature workable, continuous working temperature 1000 ???, 1700 ??? in high temperature can withstand 15 to 30 seconds. Can block the hot melt splatter and flame heat radiation, to avoid burns.

2.Great insulation performance, blocking the outside world 98% of the heat intrusion, to maintain a good internal working condition.

3.Waterproof, can stop the water flow, water vapor intrusion.

4.Energy saving, reduce maintenance, reduce contents evaporation, reduce operating costs.

Carbon Fiber Sleeve produced by high quality carbon fiber yarn, 3K/6K/12K. With different fiber count makes sleeve different diameter. Also, the angle can be adjusted makes the sleeve be tighter or loose. Carbon Fiber Sleeve provide excellent protection for cables and hoses and can be expanded or contracted to accommodate a range of diameters. Each sleeve can be expanded by up to 30% and contracted by up to 70% of the stated diameter.

Carbon Fiber Sleeve are extremely resistant to cracks between layers, reducing the possibility of delaminating and increasing the strength of the product. When inflated, braided reinforcement works much like a shark's body, orienting itself to the direction of force. This actually strengthens its outer skin, enabling it to withstand pressure and carry load, and to tolerate damage and fatigue. If a puncture does occur, the sleeve provides a slow, controlled failure, rather than a more damaging and potentially dangerous blow up. It’s widely used for cover some surface irregular wires, cables or hose, good stability and high torsional strength. Aerospace, Wind power, Marine, Exhaust pipe, Sports equipment, Machinery class, etc.

1. Good performance on electrical insulation and heat preservation.

2. Extremely light but very stable.

3. High tensile strength and temperature resistance.

4. Flexible and easy to install.

Unitex Fiberglass Sleeve is made of high quality texturized fiberglass yarns by twill braiding process, it will not burn and will withstand continuous exposure to temperatures of 1000??? / 550???. It resists most acids and alkalis and is unaffected by most bleaches and solvents. It is highly flexible and conformable. It provides excellent protection for industrial wires, cables, hoses (hydraulics), tube and pipes and also provides thermal insulation and personnel protection.

1.Low thermal conductivity.

2.Excellent thermal shock resistance, thermal stability.

3.Excellent tensile strength.

4.Sound insulation.

5.Easy cut and easy install.

6.Containing no asbestos.

7.Chemical corrosion resistance.

Basalt fiber sleeve is a biaxial braid of precisely oriented fibers of maximum stiffness, tortuosity stability and compressive strength. We process the sleeves making use of the 45 degrees of weaving process. When they are combined with resin, they can achieve optimal mechanical performance. The sleeve can easily and repeatedly be expanded open to fit over molding tools or cores. They can accommodate straight, uniform, cross section forms as well as nonlinear, irregular, cross section components. With the properties of low weight, abrasion resistance and high stiffness, etc., they are extensively applied in artificial limb, baseball bats, generator pole, car oil pipeline and so on.

1. Excellent chemical resistance, such as acid and alkali corrosion resistance

2. It has excellent high temperature resistant properties, in the 650 ??? still retain 30% of the basalt fiber strength, softening, the start of the 850 ??? itself has not burning, not decompose, the characteristics of the melt, and there is no decomposition, environmental friendly;

3. Excellent weather resistance, uv resistance function, basically no change in the soil performance characteristics;

4. Basalt fiber rope itself is inorganic fiber processing and become, the surface is smooth, with no water absorption characteristics;

5. Basalt fiber has excellent tensile strength of single fiber tensile strength can reach 3800 Mpa, so excellent basalt fiber rope tensile strength, and elongation at break, lower deficiency.

aramid fiber is firstly developed in 1960s by dupont company in usa. The trade name of dupont para-aramid is kevlar, and also dupont have developed meta-aramid named nomex. In 1965. The full chemical name of aramid is poly- p- phenylene terephthamide, it is an advanced high strength, high modulus synthetic fiber. Weight is only 1/5 of the steel, he strength is 5 to 6 times the strength of steel. The modulus is 2 to 3 times that of steel. Toughness is twice to steel.  it has soft feel, good spinnability, good insulation performance, long term working life and flame resistance.

aramid fiber sleeve is a biaxial braid of precisely oriented fibers of maximum stiffness, tortuosity stability and compressive strength. We process the sleeves making use of the 45 degrees of weaving process. When they are combined with resin, they can achieve optimal mechanical performance. The sleeve can easily and repeatedly be expanded open to fit over molding tools or cores. They can accommodate straight, uniform, cross section forms as well as nonlinear, irregular, cross section components. With the properties of low weight, abrasion resistance and high stiffness, etc. , they are extensively applied in artificial limb, baseball bats, generator pole, car oil pipeline and so on.

1. Low gravity.

2. Electrical insulator.

3. Low thermal expansion coefficient.

4. High tensile strength and high tensile strength.

5. Elastic, high stability, high modulus and high fracture strength.

6. High chemical resistance, high stability, creep resistance and fatigue resistance.

7. High temperature resistance, flame resistance and non-melting will only be carbonized.

Aramid fiber is firstly developed in 1960s by DuPont company in USA. The trade name of DuPont Para-Aramid is Kevlar, and also DuPont have developed Meta-Aramid named 1965. The full chemical name of Aramid is poly- p- phenylene terephthamide, It is an advanced high strength, high modulus synthetic fiber. Weight is only 1/5 of the steel, he strength is 5 to 6 times the strength of steel. The modulus is 2 to 3 times that of steel. Toughness is twice to steel.  It has soft feel, good spinnability, good insulation performance, long term working life and flame resistance.

Aramid fiber knitted sleeve is a knitted weave sleeve, it is more tightness compared to normal braided sleeve with more soft feeling. It is suitable for automobile, marine heat insulation. Also suitable for garment production, equipment protection.

1. Low gravity.

2. Electrical insulator.

3. Low thermal expansion coefficient.

4. High tensile strength and high tensile strength.

5. Elastic, high stability, high modulus and high fracture strength.

6. High chemical resistance, high stability, creep resistance and fatigue resistance.

7. High temperature resistance, flame resistance and non-melting will only be carbonized.