Ursa Associates

Size	0-5Kg
Packaging Type	Can
Form	Grease
Model Number	Dow FS 1292
Size (Kg)	1 kg
Brand	Molykote

Since inception, we are engaged offering Molykote Dow FS 1292 Grease   that is a new designed specifically for lubrication of the most severe applications in the food industry. This grease is an over based calcium sulfonate based greased formulated with permitted ingredients and also include anti-oxidants. In addition to this, we provide this grease at market leading price to our valued clients.

MOLYKOTE® BR 2 plusHigh Performance Grease
High performance grease with solid lubricants for metal/metal
combinations involving slow to fast movements, particularly
with medium to high loads
APPLICATION
• Used successfully on roller bearings, plain bearings, sliding guides, roller
guides, ball-and-socket joints, splined shafts and threaded spindles.

FEATURES
• High load carrying capacity
• Suitable for long-term lubrication
• Good oxidation resistance
Emergency running properties, i.e.
•
in the case of mixed friction
providing of wear protection by
solid lubricants and EP additives
Good protection against scaring
•
(false Brinelling)
• Good water washout resistance
• Good corrosion protection
Good protection against fretting
•
corrosion
COMPOSITION
• Mineral oil
• Lithium soap
• Solid lubricants
• EP additive
• Corrosion inhibitor
HOW TO USE
How to apply
Clean points of contact. Apply in
same way as lubricating greases,
using brush, spatula, grease-gun or
automatic lubricating device. Suitable
for delivery by central lubricating
system.
HANDLING PRECAUTIONS
PRODUCT SAFETY
INFORMATION REQUIRED FOR
SAFE USE IS NOT INCLUDED.
BEFORE HANDLING, READ
PRODUCT AND SAFETY DATA
SHEETS AND CONTAINER
LABELS FOR SAFE USE,
PHYSICAL AND HEALTH
HAZARD INFORMATION. THE
SAFETY DATA SHEET IS
AVAILABLE FROM YOUR LOCAL
DOW CORNING SALES
REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the
original unopened containers, this
product has a usable life of 60 months
from the date of production.
PACKAGING
This product is available in different
standard container sizes. Detailed
container size information should be
obtained from your nearest
Dow Corning sales office or
Dow Corning distributor.
LIMITATIONS
This product is neither tested nor
represented as suitable for medical or
pharmaceutical uses.

Dow Corning® 111 Valve Lubricant & Sealant
Primary Use – General purpose O-ring and valve lubricant.
Special Characteristics – Provides a noncuring moisture barrier; high dielectric strength; moisture and ozone resistance; good thermal, oxidation and chemical stability; suitable for use with potable water under NSF 61.
Physical Form – Heavy-consistency, translucent white, grease-like silicone paste.
Applications – Lubricating plug, sanitary, gate, ball, butterfly and automated valves, pump packings, rubber and plastic O-rings; sealing vacuum and pressure systems (especially equipment subjected to washing and harsh environments); damping medium for dash pots in electrical equipment
Temperature Range – From -40 to 400°F (-40 to 204°C).
Listings/Specifications – FDA 21 CFR 175.300, NSF 51, NSF 61

Molykote® 44 High Temperature Bearing Grease
Primary Use – Lubricating antifriction bearings, plastic and rubber parts under light to moderate loads; designed to give long service life in high-temperature bearings.
Special Characteristics – Resists oxidation, moisture; wide service temperature range; excellent lubricant for plastic components; low to moderate loads; moderate to high speeds.
Physical Form – Off-white, lithium soap thickened, silicone grease. Available as 44 Light, NLGI #1 or as 44 Medium, NLGI #2.
Applications – Lubricating motor bearings on appliances, ball bearings in electric motors, kiln preheater fans, oven fans, textile slashers and driers, conveyor systems.
Temperature Range – From -40 to 400°F (-40 to 204°C).
Limitations – Not recommended for high load situations.
Color - WhiteDropping Point - 220 Deg CLoad Carrying Capacity - 1100 4 ball weld, NNLGI Number - 2 Service Temperature High - 204 Deg C Service Temperature Low - -40 Deg C Shelf Life - 1800 Days Specific Gravity @ 25C - 1.05 Thickening System - Lithium Soap Worked Penetration - 280 mm/10

Molykote®G-4500 Multi-Purpose Synthetic Grease
Primary Use – Long-term lubrication for moderate loads at higher speeds, especially for incidental food-contact applications or where a white or H-1 grease is preferred.
Special Characteristics – Acceptable under FDA 21 CFR 178.3570 for use in applications with possible incidental food contact and other applications operating under moderate to high loads and speeds. Formulated to provide higher load carrying capacity, greater wear resistance and longer service life compared with conventional petroleum based lubricants.
Physical Form – Synthetic NLGI#2 grease, consisting of a unique formulation that includes polyalphaolefin (PAO) base oil, aluminum complex thickener and polytetrafluoroethylene (PTFE) as well as other solid lubricants.
Applications – Lubricating mixers, motors, conveyors, low-temperature equipment, packaging machines and many other applications in or out of the food processing industry.
Listings/Specifications – H-1
Color - White Dropping Point - 270 Deg C Load Carrying Capacity - 3090 4 ball weld, N NLGI Number - 2 Shelf Life - 1800 Days Specific Gravity @ 25C - 0.84 Temperature Range - -40 Deg C to 150 Deg C Thickening System - Aluminum Complex Worked Penetration - 265 mm/10 to 295 mm/10

Molykote®1000 High Temperature Anti-Seize Paste
Primary Use – High Temperature Anti-Seize Premium multi-purpose paste for threaded connections.
Special Characteristics – Release and sealing properties; resists aging; wide service temperature range; protects against fretting corrosion.
Physical Form – Brown, mineral oil based paste containing solid lubricants, powdered metals and corrosion inhibitors.
Applications – Lubricating threaded connectors exposed to severe environments;lubricating rollers, oven chains, hinges, marine and outdoor equipment.
Temperature Range – Solids from -20 to 1202°F (-30 to 650°C); base oil from -40 to 250°F (-40 to 121°C).
Limitations – Not recommended for use in grease guns or high-pressure systems; separation may occur.

Color - BrownLoad Carrying Capacity - 4800 4 ball weld, NService Temperature High - 650 Deg CService Temperature Low - -30 Deg C Shelf Life - 1800 Days Specific Gravity @ 25C - 1.25 Unworked Penetration - 280 mm/10 to 310 mm/10

Brand

Molykote

MOLYKOTE G-N PLUS

SOLID LUBRICANT PASTE

Solid lubricant paste for the assembly and running-in of metal
components
3 APPLICATIONS
Press-fit production of all types of machine elements, as a running-in lubricant
for new machines and gear-boxes.
Permanent lubrication of machine elements that are moved only rarely or
slightly and also for drilling, sawing and thread cutting.
Used successfully for lubricating threaded spindles, splined shafts, toothed
gears, worm and transmission gears, screws, valves, pumps, machine-tool
guides and also for the tightening and fitting of roller bearings, washers,
wheels, flanges and bolts.

FEATURES
High pressure-absorption
capacity
Low coefficient of friction,
(μ = 0.09, no stick-slip)
Prevents frictional corrosion and
scoring
Protection from stick-slip
Good anti-corrosion properties
Reduces frictional corrosion
Simplifies dismantling processes
High surface covering capacity
(40m2/kg)
COMPOSITION
Mineral oil
Solid lubricants
Thickener
HOW TO USE
How to apply
Clean the sliding surfaces or contact
areas, then apply paste with a brush,
cloth, synthetic sponge or window
leather. Do not use in excess as with
grease lubrication. Vigorous rubbing
into metal surface will improve
adhesion. Do not mix with greases or
oils.
HANDLING PRECAUTIONS
A Product Safety Data Sheet should
be obtained from your nearest
Dow Corning sales office prior to use.
ATTENTION: Before handling, read
product information, Product Safety
Data Sheets and container labels for
safe use, and any physical and/or
health hazard information.
USABLE LIFE AND STORAGE
When stored at or below 20°C in the
original unopened containers this
product has a usable life of 60 months
from the date of production.
Dow Corning will guarantee the
usable life of this product until the
date indicated on the packaging. This
date is shown by the letters "EXP"
(meaning Expiry) followed by 4
digits, which stand for the month (last
day) and year. Example: "EXP 03/99"
means use by 31 March 1999.
PACKAGING INFORMATION
This product is available in different
standard container sizes. Detailed
container size information should be
obtained from your nearest
Dow Corning sales office or
Dow Corning distributor.
LIMITATIONS
This product is neither tested nor
represented as suitable for medical or
pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
Dow Corning's Health, Environment
and Regulatory Affairs (HERA)
Department is available to support
customers for their product safety
needs. For further information, you
can contact this group at:
ENVIRONMENTAL
INFORMATION
Dow Corning's Health, Environment
and Regulatory Affairs (HERA)
Department is available to support
customers for their product safety
needs.

Unit Pack Size	1 kg
Brand	Molykote

Molykote® DX Paste is a grease-paste that reduces friction in low speed, high load applications by delivering a combination of white solid lubricants with a mineral oil carrier fluid to the required point of lubrication.

Base Oil Viscosity, 40ºC= 110 cSt ColorWhite Density= 1.1 grams per cc Service Temperature High= 125 Deg C Service Temperature Low= -25 Deg C Shelf Life= 1800 Days Unworked Penetration285 mm/10 to 315 mm/10

Brand

Molykote

Molykote® 44 High Temperature Bearing Grease

Lubricants for antifriction bearings and plastic and rubber parts APPLICATIONS All three Molykote® Bearing Greases are used to lubricate ball bearings operating under light to moderate loads. These can be used for: Molykote 33 Extreme Low Temperature Bearing Grease ??? Freezer cart casters and cold room conveyor equipment ??? Utility disconnect switch contacts ??? Plastic electric clock motors ??? Maximum-demand meters, power-factor meters, watt-hour meters ??? Windshield wiper motor gears ??? Photographic, optical and surveying equipment ??? Oscillographs, geophysical and light, low-torque instruments ??? Starter clutch drives Molykote 41 Extreme High Temperature Bearing Grease ??? Antifriction bearings of high-temperature equipment ??? Oven conveyor bearings ??? Wheel bearings of core oven carts ??? Governor linkage of steam turbines ??? Ball and socket connections of power insulators Molykote 44 High Temperature Bearing Grease ??? Kiln preheater fans, oven fans, radiator cooling fans ??? Textile slashers and driers ??? Aircraft engine ??? Conveyor systems These greases do not soften or affect most plastics and are used to lubricate plastic gears, bearings and cams, as well as metal and rubber parts. Because of low torque requirements, Molykote 33 Extreme Low Temperature Bearing Grease is especially effective in equipment that must start in extreme cold. Oxidation Resistance – Molykote Bearing Greases are recommended for use in units that must remain operable when subjected not only to low and high operating temperatures, but also to severe weathering and oxidation

Brand	Molykote
Unit Pack Size	1 kg
Usage	Industrial Area
Pack Type	Can

Molykote P37 Ultra Pure, We are offering Molykote P37 Ultra Pure High Pressure Paste.

Grade Standard	Industrial Grade, Chemical Grade
Features	Dielectric

DOW CORNING® 4 ELECTRICAL INSULATING COMPOUND
Dow Corning® 4 Electrical Insulating Compound can be applied by hand, specially designed automated equipment, brushing or wiping. Certain designs of grease guns may seize up with silicone compounds; test prior to use.

Grease like material containing an inert silica filler in combination with selected polydimethyl silicone fluids APPLICATIONS A moisture proof seal for aircraft, automotive and marine ignition systems and spark plug connections, disconnection junctions in electrical wiring systems also in electrical assemblies and terminals. • Used as a seal and lubricant for cable connectors, battery terminals, rubber door seals, switches and rubber and plastic O-rings and as a assembly lubricant for various metal-on-plastic and metal-on-rubber combination

Brand

Molykote

Molykote® P-40 Paste
Primary Use – Metal free paste which can be used for all assembly and continuous lubricating jobs, particularly those exposed to corrosive environments such as splash water or humidity.
Special Characteristics – Excellent adhesion, good corrosion protection, water resistance and anitfretting characteristics.
Physical Form – Yellowish Brown, metal/copper free paste based in a synthetic blend oil with tackifier additives.
Applications – Assembly and threaded connections, spline shafts, mounting of bearings. Continuous lubrication for various parts in brake systems, brake rods and guide bolts. Axles of commercial vehicles, cams and plain bearings. Marine applications. Open gears.
Temperature Range – Solids from -20 to 2000°F (-29 to 1093°C); base oil from -40 to 250°F (-40 to 121°C).

Color - Yellowish-BrownKinetic/ Kinematic Viscosity - 360 CentistokesLoad Carrying Capacity - 3000 4 ball weld, N Service Temperature High - 1200 Deg CService Temperature Low - -40 Deg C Shelf Life - 1800 DaysUnworked Penetration - 310 mm/10 to 350 mm/10Water Resistant

Molykote®557 Silicone Dry Film Lubricant
Primary Use – Dry film lubrication of sliding contacts, particularly with aluminum and stainless steel; helps extend the life of knives, tools and dies; sizing and coiningpowdered metal parts.
Special Characteristics – Colorless; nonstaining; high loads at low speeds.
Physical Form – Translucent, wax-like silicone dispersed in solvent.
Applications – Lubricating slitter blades, tools and dies, taps and drills, slides, conveyors, adjusting screws, guides, tracks, handling equipment, metal stamping machines;improving surface finish of aluminum during extrusion; in the textile and woodworking industries to reduce staining from spinning frames, scissors, punches, material handlingand packaging equipment.
Temperature Range – From -40 to 110°F (-40 to 43°C).
Listings/Specifications – H-2. Acceptable for use where there is no possibility of food contact.
Color - ClearFlash Point, Closed Cup - 39 Deg C Load Carrying Capacity - 1200 4 ball weld, N Room Temperature Cure - 0.5 Hours Service Temperature High - 43 Deg C Service Temperature Low - -40 Deg C Shelf Life - 1800 Days Specific Gravity @ 25C - 0.77

Molykote® P-37 Ultrapure High Temperature Paste
Primary Use – Threaded connections where an ultrapure paste is needed.
Special Characteristics – Helps prevent seizure and damage of threaded connections during assembly and disassembly after extreme high-temperature exposure; nickel-free;does not contain any compounds that embrittle alloys.
Physical Form – Black, metal-free paste consisting of solid lubricants in ultrapure, sulfur-free synthetic oils.
Applications – Threaded connections, particularly those consisting of steel alloys with high chromium, nickel or molybdenum content (stainless steel); steam and gas turbine fasteners.
Temperature Range – Solids from -20 to 2550°F (-29 to 1400°C); base oil from -40 to 250°F (-40 to 121°C).
Color - Greyish-BlackDensity - 1.2 grams per ccLoad Carrying Capacity - 4400 4 ball weld, NService Temperature High - 1400 Deg CService Temperature Low - -40 Deg CShelf Life - 1800 DaysUnworked Penetration - 280 mm/10 to 310 mm/10

Brand

Molykote

FEATURES ??? Outstanding lubrication, coupled with corrosion protection properties ??? High load carrying capacity ??? High wear resistance ??? High temperature resistance ??? Resistant to oil, grease, solvents ??? Avoidance of fretting corrosion COMPOSITION ??? Solid lubricants ??? Organic binder ??? Organic solvents

Heat-curing dry film lubricant APPLICATIONS ??? For metal/metal combinations with slow to moderately fast movements and moderate to high loads. ??? Suitable for highly stressed sliding areas with low sliding speeds, oscillating movements or intermittent operations. ??? For permanent lubrication at high temperatures and also where oils and greases cannot be used. ??? Used successfully for piston rings and tappets of combustion engines, magnetic armatures of vehicle starter motors, bonnet lock components.

Unit Pack Size	1 can
Brand	Molykote

Molykote® D-321 R Anti-Friction Coating

FEATURES BENEFITS ??? Air drying ??? Avoidance of stick-slip ??? High aging resistance COMPOSITION ??? Solid lubricants ??? Solvents ??? Binder

Air-curing dry film lubricant APPLICATIONS ??? For metal/metal combinations with slow to medium fast movements and high loads. ??? Suitable for the permanent lubrication of highly stressed sliding guides with low sliding speeds, oscillating movements or intermittent operation. ??? Improving the running-in process and for lubrication under high vacuum and at extreme temperatures. ??? Used successfully for cylinder-head bolts, toaster guides, car mirror adjustment mechanisms, high voltage switches, for the running-in of highly stressed gear wheel. ??? Emergency lubricant for parts of the rotor head of wind energy installations

Brand

Molykote

Molykote® Supergliss Corrosion Protective Lubricant

Molykote® Supergliss is a corrosion protective lubricant with excellent penetrating properties. Due to its special formulation, it is able to simplify dismantling of components as well as loosening rust from surfaces.

Lubricating oil with penetrating properties APPLICATIONS ??? Simplify dismantling of rusty components. Used as corrosion protection.

MOLYKOTE® Z POWDER
Lubricates metal surfaces in many difficult and extreme environments e.g. metal/metal pairings at extreme loads and slow speeds, or metal/plastic pairings at low loads and low to medium speeds

Solid Lubricant APPLICATIONS Molykote® Z Powder can be used: ??? as a dry burnished (rubbed-on) lubricating film for metallic contacts ??? as a solid lubricant additive for self-lubricating plastics and sinter metal parts ??? as a solid lubricant additive in metalworking compounds ??? as a solid lubricant additive in brake lining application ??? as run-in aid, in press-fittings, in Heavy Loads and Slow Speeds applications and also in extreme environments (for example in dusty atmosphere or extremes of temperatures)

Brand

Molykote

MOLYKOTE® METAL PROTECTOR PLUS
Corrosion protection coating

ColorTransparent
Density= 0.84 grams per cc
Flash Point, Closed Cup= 28 Deg C
Shelf Life= 1800 Days

Usage

Laboratory, Industrial

Dow Corning® 7 Release Compound

APPLICATIONS Dow Corning® 7 Release Compound can be used in applications including:
• Mold release agent for foundry shell and core molds • Break-in treatment for bladders on tire presses
• Rubber lubricant and preservative
• Release agent for adhesives and glues
• Cable-pulling lubricant to draw rubber-covered cable through conduit
• Release agent for plastic extruders and processing equipment
• Release agent for plastic film packaging machines