Vacuum Gauges

'VICO' offers a range of vacuum measurement instruments and vacuum pirani and penning gauges. These gauges are compact, and durable and long lasting.

The gauges are available in both analog and digital mode

Interested in this product?

Get Best Quote

Digital Vacuum Gauge

Rs 15,000 / PieceGet Latest Price

‘VICO’ digital vacuum pirani gauge displays vacuum pressure as measured from a s-pr-gh sensor tube. It displays vacuum measurements based on thermal conductivity of air or nitrogen. The controller covers the range from 0. 001bar to 1000 mbar, and controls two relays with independent set points (set point optional).

Specifications:

Power requirement	230vac +/- 10%, 50 hz, 15 watts (approx)
Fuse	100 m. A glass cartridge 5x20 mm
Physical size	Height: 91 mm/ width: 91 mm/depth: 236 mm/front bezel: 98x98 mm/thickness: 10 mm
Cut out of size	92 mm x 92 mm
Operating temperature	0 to 45 degrees c
Pressure range	Atm to 0. 001mbar (atm to 10^-3 mbar)
Gauge head (sensor)	Pirani gauge head with kf-10 (1 or 2 nos. )
Bridge voltage	-2 vd. C +/- 0. 5%
Number of sensor	One or two as required
Analog out	0-10v (approx) 10 (-3) to 999 mbar 0-10 v (non linear) can be connected to any suitable recorder or as control signal with an input impedance not less than 10k. Ohms
Display	3 digit led numeric display with (ur) under range (at) and (or) over range (fs)

View Complete Details

Yes, I am interested!

Interested in this product?

Get Best Quote

Digital Penning Gauge

Rs 15,000 / PieceGet Latest Price

‘VICO’ digital penning gauge is a vacuum measurement instrument designed for use with the cold cathode type gauge head sensor. This provides all necessary bridge circuit and signal conditioning, analog output, adc, digital lineariser, digital display. This model range from 9. 9x10^-3m bar to 1x10^-6 mbar. The instrument is a standard 1/4^th din rack size having front bezel of 98 x98 with cutout size of 92 x 92 mm with fixing clamps. The instrument is simple to operate having only one control knob on the front panel. The rear panel is provided with demountable type connectors for gauge head along with mains cord, fuse and analog output terminals + and - 0 to 10v analog output can be used for recorder or external control signal.

Specifications:

Power requirement	230VAC +/- 10%, 50 Hz, 22 watts (approx.)
Fuse	500 m.a Glass Cartridge 5x20 mm
Physical size	Height: 91 mm/Width: 91 mm/Depth: 236 mm Front Bezel: 98x98 mm/Thickness: 10 mm
Cut out of size	92 mm x 92 mm
Operating temperature	0 to 45 degrees C
Pressure range	(1 x 10^-2) 9.9 x 10^-3mbar to 1 x 10^-6mbar
Gauge head (sensor)	Pirani gauge Head with KF-25
Output voltage For sensor	220 KV DC +/- 10%
Type of sensor	Cold Cathode Ionization (Penning) Type Head
Analog out	0-2V (approx) (nonlinear) (+) grounded (-) floated can be connected to any suitable recorder or as control signal with an input impedance not less than 1 Meg.Ohms
Display	3 digit LED numeric display with (UR) under range (above 99 x 10^-3mbar) and (OR) over range (below 1.0 x 10^-6mbar)